Paper
1 April 2005 High-performance GaInNAsSb/GaAs lasers at 1.5 um
Author Affiliations +
Abstract
We achieved 1.5-um CW SQW GaInNAsSb lasers with GaNAs barriers grown by MBE on GaAs substrates with typical room temperature threshold densities below 600A/cm2, external quantum efficiencies above 50%, and output powers exceeding 200mW from both facets for 20x1222um devices tested epitaxial-side up. In pulsed mode, 450A/cm2, 50%, and 1100mW were realized. Longer devices yielded over 425mW of total CW power and thresholds below 450A/cm2. These results are comparable to high quality GaInNAs/GaAs lasers at 1.3um. Z-parameter measurements revealed that these improvements in the performance metrics of approximately 40-60% over previous results are primarily due to reduced monomolecular recombination. The large differential gain of GaInNAsSb/GaNAs/GaAs lasers at 1.5um of approximately 1.2x10-15cm2 was mostly squandered in previous devices due to large quantities of monomolecular recombination. The characteristic temperatures for threshold current, T0, and for efficiency, T1, were 66K and 132K, respectively. These reduced values, compared to prior measurements of 106K and 208K, respectively, indicate carrier leakage. Since monomolecular recombination is temperature insensitive, the temperature stability of device operation was adversely affected.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lynford L. Goddard, Seth R. Bank, Mark A. Wistey, Homan B. Yuen, and James S. Harris Jr. "High-performance GaInNAsSb/GaAs lasers at 1.5 um", Proc. SPIE 5738, Novel In-Plane Semiconductor Lasers IV, (1 April 2005); https://doi.org/10.1117/12.591447
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistance

Continuous wave operation

Laser damage threshold

Neodymium

External quantum efficiency

Gallium arsenide

Temperature metrology

Back to Top