PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
This paper investigates the change in optical performance in a multi-element lens objective from a series production automotive camera, due to elevated temperature. The change in optical performance is evaluated by a coupled thermomechanical and optical finite element (FE) simulation. The change in the overall geometry of the objective at 85°C is calculated by thermo-mechanical simulation and caused by the expansion of individual elements. In addition, the change in the surface geometry of the lenses is obtained after smoothening the distorted FE mesh. Optical simulations are performed afterward on the deformed objective to evaluate the optical parameters including MTF (modulation transfer function) at 60 line pairs per millimeter (lp/mm). A shift of the best focus position of the lens is observed. Simulated MTF values are validated by measuring the MTF at 60 lp/mm of 10 lens samples by heating it in-situ on the measurement system. It is seen that change in MTF is about 10 percent when the lens is heated from room temperature to 85°C. Coupled optical simulations indicate the presence of astigmatism and coma, implying the asymmetric change in lens geometry at elevated temperature and tilt in one or more lens elements.
Amit Pandey,Denis Unruh,Marcel Kettelgerdes,Bernhard Wunderle, andGordon Elger
"Evaluation of thermally induced change in sharpness of automotive cameras by coupled thermo-mechanical and optical simulation", Proc. SPIE 12327, SPIE Future Sensing Technologies 2023, 123270U (22 May 2023); https://doi.org/10.1117/12.2665475
ACCESS THE FULL ARTICLE
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
Amit Pandey, Denis Unruh, Marcel Kettelgerdes, Bernhard Wunderle, Gordon Elger, "Evaluation of thermally induced change in sharpness of automotive cameras by coupled thermo-mechanical and optical simulation," Proc. SPIE 12327, SPIE Future Sensing Technologies 2023, 123270U (22 May 2023); https://doi.org/10.1117/12.2665475