Brought to you by:
Paper • The following article is Open access

The influence of binder dilution on the properties of lightweight composites

and

Published under licence by IOP Publishing Ltd
, , Citation A Daubnerova and S Uncik 2018 IOP Conf. Ser.: Mater. Sci. Eng. 385 012010 DOI 10.1088/1757-899X/385/1/012010

Download Article PDF

Article metrics

99 Total downloads

Share this article

Author affiliations

1 Department of Material Engineering, Slovak University of Technology, Faculty of Civil Engineering, Radlinskeho 11, 810 05, Bratislava

Buy this article in print

Journal RSS
Sign up for new issue notifications
1757-899X/385/1/012010

Abstract

In the experiment was monitored the influence of thermal-technical properties by binder amount. As binder was used organic based glue 4,4´MDI (Conipur 360). At the same time was verified possible dilution of binder with water. The binder was diluted in amounts of 5, 10, 15, 20, 25 and 30%. However, in the case of 25 and 30% has not been achieved complete dilution. Recycled plastic EVA (ethyl vinyl acetate) was used as filler.

Export citation and abstract BibTeX RIS

Previous article in issue
Next article in issue

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1757-899X/385/1/012010