Abstract
The expected increase of the particle flux at the high-luminosity phase of the LHC (HL-LHC) with instantaneous luminosities up to L = 7.5× 1034 cm−1s−1 will have a severe impact on the ATLAS detector performance. The pile-up is expected to increase on average to 200 interactions per bunch crossing. The reconstruction and trigger performance for electrons, photons as well as jets and transverse missing energy will be severely degraded in the end-cap and forward region, where the liquid Argon based electromagnetic calorimeter has coarser granularity and the inner tracker has poorer momentum resolution compared to the central region. A High Granularity Timing Detector (HGTD) is proposed in front of the liquid Argon end-cap calorimeters for pile-up mitigation and for bunch per bunch luminosity measurements. This device should cover the pseudo-rapidity range of 2.4 to about 4.0. Two Silicon sensors double-sided layers are foreseen to provide a precision timing information for minimum ionizing particle with a time resolution better than 50 pico-seconds per hit (i.e. 30 pico-seconds per track) in order to assign the particle to the correct vertex. Each readout cell has a transverse size of 1.3 mm×1.3 mm leading to a highly granular detector with about 3 millions of readout electronics channels. Low-Gain Avalanche Detector (LGAD) technology has been chosen as it provides an internal gain good enough to reach large signal over noise ratio needed for excellent time resolution. Extensive LGAD research and development (R&D) campaigns are carried out to investigate the suitability of this new technology as timing sensors for HGTD. The related readout ASIC is also being studied extensively.