Paper The following article is Open access

Design of Circular Polarized Antenna by Using Inverted Suspended Circular Patch Design for WLAN Application at 2.4 GHz

, , and

Published under licence by IOP Publishing Ltd
, , Citation H. A. Bakar et al 2018 J. Phys.: Conf. Ser. 1049 012031 DOI 10.1088/1742-6596/1049/1/012031

1742-6596/1049/1/012031

Abstract

In this paper, an inverted suspended circular patch antenna with circular polarization is proposed for wireless local area network (WLAN) operating at 2.4 GHz frequency. The antenna was designed based on inverted suspended circular patch with an air gap between substrate and ground plane layer at distance of 10 mm. L-probe technique is used in this antenna design in order to feed the signal from SMA probe to the feedline of the circular patch structure. The design and simulation process are done by using Computer Simulation Technology (CST) software. Antenna performances in term of return loss, resonant frequency, bandwidth, gain, directivity, axial ratio, total efficiency and radiation pattern at 2.4 GHz frequency are discussed. The comparison result of simulation and measurement show that the proposed circular polarized antenna obtained bandwidth more than 100 MHz with gain and return loss achieved more than 5 dB and -13 dB at 2.4 GHz.

Export citation and abstract BibTeX RIS

Content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.

Please wait… references are loading.
10.1088/1742-6596/1049/1/012031