The following article is Open access

Thermal distortion minimization by geometry optimization for water-cooled white beam mirror or multilayer optics

, , , , , , , and

Published under licence by IOP Publishing Ltd
, , Citation L Zhang et al 2013 J. Phys.: Conf. Ser. 425 052029 DOI 10.1088/1742-6596/425/5/052029

Download Article PDF

Article metrics

882 Total downloads

Share this article

Author affiliations

1 European Synchrotron Radiation Facility, 6 rue Jules Horowitz, F-38000 Grenoble, France

2 Stanford Synchrotron Radiation Lightsource, 2575 Sand Hill Road, Menlo Park, CA 94304, USA

Buy this article in print

Journal RSS
Sign up for new issue notifications
1742-6596/425/5/052029

Abstract

The temperature distribution and thermal deformation of optics subject to heat load largely depend on the system geometry. It is possible to optimize this geometry and therefore to minimize thermal distortion of both white beam mirrors and multilayer-based optics. The thermal slope error in an optimized water-cooled white beam mirror can be reduced by two to three orders of magnitude compared to a non-optimized mirror.

Export citation and abstract BibTeX RIS

Previous article in issue
Next article in issue
Please wait… references are loading.
10.1088/1742-6596/425/5/052029