Issue 9, 2023

Effect of temperature on the CO2 splitting rate in a DBD microreactor

Abstract

A novel plate-to-plate dielectric barrier discharge microreactor (micro DBD) has been demonstrated in CO2 splitting. In this design, the ground electrode has a cooling microchannel to maintain the electrode temperature in the 263–298 K range during plasma operation. A small gap size between the electrodes of 0.50 mm allowed efficient heat transfer from the surrounding plasma to the ground electrode surface to compensate for heat released in the reaction zone and maintain a constant temperature. The effect of temperature on CO2 conversion and energy efficiency was studied at a voltage of 6–9 kV, a frequency of 60 kHz and a constant CO2 flow rate of 20 ml min−1. The CO2 decomposition rate first increased and then decreased as the electrode temperature decreased from 298 to 263 K with a maximum rate observed at 273 K. Operation at lower temperatures enhanced the vibrational dissociation of the CO2 molecule as opposed to electronic excitation which is the main mechanism at room temperature in conventional DBD reactors, however it also reduced the rate of elementary reaction steps. The counterplay between these two effects leads to a maximum in the reaction rate. The power consumption monotonously increased as the temperature decreased. The effective capacitance of the reactor increased by 1.5 times at 263 K as compared to that at 298 K changing the electric field distribution inside the plasma zone.

Graphical abstract: Effect of temperature on the CO2 splitting rate in a DBD microreactor

Article information

Article type
Paper
Submitted
22 Feb 2023
Accepted
09 May 2023
First published
09 May 2023
This article is Open Access
Creative Commons BY license

React. Chem. Eng., 2023,8, 2223-2233

Effect of temperature on the CO2 splitting rate in a DBD microreactor

D. Khunda, S. Li, N. Cherkasov, M. Z. M. Rishard, A. L. Chaffee and E. V. Rebrov, React. Chem. Eng., 2023, 8, 2223 DOI: 10.1039/D3RE00113J

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements