A tetrathienopyrrole-based ladder-type donor polymer for high-performance organic near-infrared cavity detectors†
‡abc
Jorne
Raymakers,
‡abc
Quan
Liu,
*abc
Jochen
Vanderspikken,
abc
Yuming
Wang,
abc
Tyler James
Quill,
d
Niko
Van den Brande,
e
Laurence
Lutsen,
abc
Koen
Vandewal
*abc
and
Wouter
Maes
*abc
Abstract
Organic semiconductors can afford detection at wavelengths beyond commercial silicon photodetectors. However, for each targeted near-infrared wavelength range, this requires individually optimized materials, which adds to the complexity and costs. Moreover, finding molecules with strong absorption beyond 1 μm that perform well in organic photodetectors remains a challenge. In microcavity devices, the detection window can be extended to wavelengths inaccessible for silicon without the need for new materials by adopting an intelligent design. Previous work has demonstrated the applicability of a dithienopyrrole-based donor polymer (PDTPQx) in such a cavity photodetector device, with a photoresponse up to 1200 nm. In this work, the π-conjugated backbone of the polymer is extended, affording higher hole mobility and better donor:acceptor intermixing. This leads to enhanced peak external quantum efficiencies up to 1450 nm. The (thermal noise limited) detectivities achieved with the PTTPQx polymer (1.07 × 1012 to 1.82 × 1010 Jones) are among the very best in the 900–1400 nm wavelength regime.
Please wait while we load your content...
