As a natural “water-based” polymer composite material, oriental lacquer is often referred to as the “king of coatings” and is used as a coating in the defense industry, chemical industry, petroleum industry, metallurgy and mining industry, textile painting and dyeing industry, pharmaceutical industry, as well as the protection of ancient buildings and cultural relics. However, the development of modern industrialization is greatly hindered by the high viscosity of oriental lacquer, the difficulty of spraying, the long drying cycle, and the seriousness of allergenicity. Herein, based on the principle of oriental lacquer and the characteristics of prepolymer in ink, we developed a new prepolymer for modulating UV oriental lacquer ink and explored the feasibility of using it as a raw material for UV spray painting. In this study, lacquer phenol was extracted from oriental lacquer and modified with epoxy acrylate by a simple mechanical compounding method to obtain lacquer epoxy acrylate. Moreover, the UV spray painting oriental lacquer ink was also prepared by using it as the main film-forming substance. The orthogonal experiment method was used to optimize the best formulation of UV spray painting oriental lacquer ink by using nozzle passability, viscosity and curing time as test indexes. Meanwhile, the film properties of UV spray painting oriental lacquer inks were also evaluated. The test results show that the UV spray painting oriental lacquer ink prepared with urushiol epoxy acrylate has better dispersion, excellent paint film performance, and solves the problem that oriental lacquer cannot be printed. This present work shows that urushiol epoxy acrylate as a new type of prepolymer has broad application prospects in the actual preparation of UV inks.