Issue 2, 2023

A new catalyst based on disposed red mud for the efficient electrochemical reduction of nitrate-to-ammonia

Abstract

Many concerns have been raised about ecological and environmental risks from the disposal of red mud (RM) in the aluminium industry. For a long time a suitable use for RM, due to the huge amount produced, has been needed. This study, for the first time, applies RM as an efficient electrochemical catalyst in the emerging nitrate-to-ammonia reduction reaction (NARR) based on renewable energy, in which the produced green ammonia can supply energy for rechargeable ammonia energy storage (RAES). The performance of RM stands out among many other synthetic catalysts in the NARR as well as further combination with photovoltaic technology. Specifically, it exhibits a superior faradaic efficiency toward NH3 of 92.8% and an NH3 formation rate of 0.16 mmol cm−2 h−1 under −0.73 V (vs. reversible hydrogen electrode) in a neutral phosphate buffer solution with 1.0 M NO3. The energy efficiency toward NH3 is over 30% in a two-electrode system, and that of the solar-to-NH3 conversion is 2.09% at a light intensity of 0.06 W cm−2 based on a commercial poly-Si photovoltaic cell. The results promise a low-cost RM catalyst for the NARR sustainable route, realizing RM recycling and zero-carbon ammonia-energy production.

Graphical abstract: A new catalyst based on disposed red mud for the efficient electrochemical reduction of nitrate-to-ammonia

Supplementary files

Article information

Article type
Paper
Submitted
07 Jul 2022
Accepted
10 Oct 2022
First published
11 Oct 2022

Green Chem., 2023,25, 589-595

A new catalyst based on disposed red mud for the efficient electrochemical reduction of nitrate-to-ammonia

Y. Xu, K. Ren, Z. Tao, D. K. Sam, E. Feng, X. Wang, G. Zhang, J. Wu and Y. Cao, Green Chem., 2023, 25, 589 DOI: 10.1039/D2GC02527B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements