Insights into the passivation effect of atomic layer deposited hafnium oxide for efficiency and stability enhancement in organic solar cells

Ermioni Polydorou; Martha Botzakaki; Charalampos Drivas; Kostas Seintis; Ilias Sakellis; Anastasia Soultati; Andreas Kaltzoglou; Thanassis Speliotis; Mihalis Fakis; Leonidas C. Palilis; Stella Kennou; Azhar Fakharuddin; Lukas Schmidt-Mende; Dimitris Davazoglou; Polycarpos Falaras; Panagiotis Argitis; Christoforos A. Krontiras; Stavroula N. Georga; Maria Vasilopoulou

doi:10.1039/C8TC02243G

Insights into the passivation effect of atomic layer deposited hafnium oxide for efficiency and stability enhancement in organic solar cells†

Ermioni Polydorou,^ab Martha Botzakaki,^b Charalampos Drivas,^c Kostas Seintis,^b Ilias Sakellis,

^a Anastasia Soultati,^a Andreas Kaltzoglou,

^a Thanassis Speliotis,^a Mihalis Fakis,

^b Leonidas C. Palilis,^b Stella Kennou,^c Azhar Fakharuddin,^d Lukas Schmidt-Mende,

^d Dimitris Davazoglou,^a Polycarpos Falaras,

^a Panagiotis Argitis,

^a Christoforos A. Krontiras,^b Stavroula N. Georga^b and Maria Vasilopoulou

*^a

Author affiliations

* Corresponding authors

^a Institute of Nanoscience and Nanotechnology, National Centre for Scientific Research “Demokritos”, Agia Paraskevi, Attiki, Greece
E-mail: m.vasilopoulou@inn.demokritos.gr

^b Department of Physics, University of Patras, 26504 Patras, Greece

^c Department of Chemical Engineering, University of Patras, 26504 Patras, Greece

^d Department of Physics, University of Konstanz, 78457 Konstanz, Germany

Abstract

Atomic layer deposited hafnium oxide is inserted between the zinc oxide electron transport material and the photoactive blend to serve as an ultra-thin passivation interlayer in organic solar cells with an inverted architecture. The deposition of hafnium oxide significantly improves the surface properties of zinc oxide via effective surface passivation and beneficial modification of surface energy; the latter leads to improved nanomorphology of the photoactive blend. As a result, lower recombination losses and improved electron transport/collection at the cathode interface are achieved. A simultaneous increase in open-circuit voltage, short-circuit current density and fill factor is obtained leading to a power conversion efficiency of 6.30% in the ALD-modified cell using a poly(3-hexylthiophene):indene-C60-bisadduct blend as the photoactive layer; this represents a 25% improvement compared to 5.04% of the reference device. Moreover, the incorporation of the passivation interlayer yields a significant stability enhancement in the fabricated solar cells which retain more than 80% of their initial efficiency (T₈₀ lifetime) after 750 hours while the reference cell exhibits a T₈₀ equal to 250 hours.

Journal of Materials Chemistry C

Insights into the passivation effect of atomic layer deposited hafnium oxide for efficiency and stability enhancement in organic solar cells†

Abstract

Supplementary files

Article information

Download Citation

Permissions

Insights into the passivation effect of atomic layer deposited hafnium oxide for efficiency and stability enhancement in organic solar cells

Social activity

Search articles by author

Spotlight

Advertisements