Issue 41, 2017

Mechanical properties of boron nitride thin films prepared by atomic layer deposition

Abstract

Due to their wide bandgap, boron nitride (BN) thin films are the focus of interest for their potential applications in microelectronic devices. The reliability of these devices is essential and is directly linked to the mechanical properties of the films used for their fabrication. Herein, an atomic layer deposition (ALD) process based on sequential pulses of BBr3 and NH3 at 750 °C is used in order to prepare BN thin films. We report the main physicochemical properties of the films using various analytical methods. We also performed nanoindentation experiments in order to determine the elastic modulus and the hardness. Next, we annealed the films at 1000 and 1350 °C in order to gain understanding on the relation between the annealing temperature, the microstructure obtained and the resulting mechanical properties. Although the hardness of the films presents similar values of 5 ± 1 GPa for all temperatures, it has been found that the elastic modulus increases up to 150 ± 9 GPa when applying an annealing treatment of 1350 °C, which represents a 37% improvement compared to the initial film prepared at 750 °C.

Graphical abstract: Mechanical properties of boron nitride thin films prepared by atomic layer deposition

Supplementary files

Article information

Article type
Communication
Submitted
23 Jul 2017
Accepted
03 Oct 2017
First published
03 Oct 2017

CrystEngComm, 2017,19, 6089-6094

Mechanical properties of boron nitride thin films prepared by atomic layer deposition

M. Weber, E. Coy, I. Iatsunskyi, L. Yate, P. Miele and M. Bechelany, CrystEngComm, 2017, 19, 6089 DOI: 10.1039/C7CE01357D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements