Issue 117, 2015

Asymmetric surface effect on the configuration of bilayer Si/SiGe nanosprings

Abstract

This study investigates the asymmetric surface effect on nanosprings composed of Si/SiGe bilayer thin films. The misfit strain between Si and SiGe layers is known to be the driving force whereby the deformation into the nanospring shape occurs. The crystalline orientation and width-to-thickness ratio are the main factors that determine the deformed equilibrium configuration. In addition, as the thickness decreases to dozens of nanometers or less, the effect of the surface on the equilibrium configuration of the thin film is magnified. The diamond cubic crystal structure, unlike the face-centered or body-centered cubic structures, has asymmetric surface properties. Owing to the asymmetry, Si/SiGe bilayers with odd numbers of atomic layers have different surface configurations than those with even numbers of atomic layers. Finite element analysis with the surface effect has been performed to investigate the surface effect on the equilibrium configuration. It is observed that both size and surface configuration affect the equilibrium configuration of bilayer Si/SiGe nanosprings. An unexpected spring shape was observed when the film aligned in the 〈100〉 direction, which is unlikely if the surface effect is neglected.

Graphical abstract: Asymmetric surface effect on the configuration of bilayer Si/SiGe nanosprings

Supplementary files

Article information

Article type
Paper
Submitted
14 Sep 2015
Accepted
02 Nov 2015
First published
10 Nov 2015

RSC Adv., 2015,5, 96387-96391

Author version available

Asymmetric surface effect on the configuration of bilayer Si/SiGe nanosprings

S. Kim, W. Kim, H. Chung and M. Cho, RSC Adv., 2015, 5, 96387 DOI: 10.1039/C5RA18791E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements