Issue 114, 2015

The effects of gallium on solution-derived indium oxide-based thin film transistors manufactured on display glass

Abstract

Metal oxide semiconductor TFTs have been considerably investigated as a promising alternative to hydrogenated amorphous silicon and organic semiconductors. While many multicomponent oxide TFTs have been studied, there are only a few reports of TFTs using amorphous indium gallium oxide channel layers. In this study, the effects of gallium atomic ratio on the performance of solution-derived indium oxide-based TFTs on display glass were investigated for the first time. The morphological, optical, and electrical properties of IGO channel layers with different gallium atomic ratios were characterized. IGO TFTs with various chemical compositions were compared and interpreted based on the analysis of In3d, Ga2p, and O1s XPS data. It was found that gallium dopant suppresses the generation of oxygen vacancies, while promoting the formation of oxygen in the oxide lattice without oxygen vacancies by reducing the density of hydroxides. By adjusting the atomic ratio of gallium, we were able to fabricate IGO TFTs on display glass with an average field-effect mobility as high as 6.1 cm2 V−1 s−1, Von = −2 V, and on–off ratio of 107.

Graphical abstract: The effects of gallium on solution-derived indium oxide-based thin film transistors manufactured on display glass

Article information

Article type
Paper
Submitted
14 Aug 2015
Accepted
26 Oct 2015
First published
26 Oct 2015

RSC Adv., 2015,5, 93779-93785

Author version available

The effects of gallium on solution-derived indium oxide-based thin film transistors manufactured on display glass

C. Choi, Y. Su, L. Lin, C. Cheng and C. Chang, RSC Adv., 2015, 5, 93779 DOI: 10.1039/C5RA16392G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements