Issue 36, 2014

Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin

Abstract

The effects of graphene nanosheets (GNS) and layered double hydroxides (LDH) on morphology, flame retardancy and thermal degradation of epoxy resin (ER) were investigated. LDH was exfoliated in ER/GNS/LDH nanocomposites, while GNS was partially exfoliated and partially agglomerated into small clusters. Since not all of the GNS had good dispersion, the compactness and barrier properties of residual char in ER/GNS/LDH were inferior to ER/GNS and ER/LDH. However, the simultaneous addition of GNS and LDH created an additional GNS–LDH interface, which could increase interaction in the melt and inhibit the flammable drips of ER and thus limit the flame propagation during combustion. As a result, a synergistic effect of simultaneous addition of GNS and LDH to improve the flame retardancy of ER was realized. The LOI value of ER was increased from 15.9 to 23.6 by adding 0.5 wt% of GNS and 0.5 wt% of LDH. In comparison, the LOI value was 19.5 and 21.7 when GNS or LDH was added separately, at the same level, 1 wt%. Furthermore, both GNS and LDH can increase the thermal stability of ER; there was a synergistic effect between them to decrease the THR of ER from 33.4 to 24.6.

Graphical abstract: Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin

Article information

Article type
Paper
Submitted
13 Feb 2014
Accepted
10 Apr 2014
First published
10 Apr 2014

RSC Adv., 2014,4, 18652-18659

Author version available

Effect of graphene nanosheets and layered double hydroxides on the flame retardancy and thermal degradation of epoxy resin

S. Liu, H. Yan, Z. Fang, Z. Guo and H. Wang, RSC Adv., 2014, 4, 18652 DOI: 10.1039/C4RA01267D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements