Issue 41, 2013

Transparent and airtight silica nano- and microchannels with uniform tubular cross-section

Abstract

Experimental results on a template-assisted technique to fabricate uniform nano- and microchannels are presented. Different template materials, polystyrene and poly(vinyl alcohol) electrospun and spider silk fibres were coated with silica. After calcination mechanically stable and transparent channels with uniform tubular diameter were obtained. The diameters ranged between 150 nm and 4 μm, depending on the size of the fibre template. By coating crossed fibres we prepared connected channel junctions that were solvent- and airtight. The channels and junctions remained tight even when applying a pressure above 3 bar as verified by laser scanning confocal microscopy. The flow of liquids in the channels was monitored and described by the Lucas–Washburn equation. We varied the viscosities and surface tensions of the liquids and measured the filling velocities over a distance of several millimeters as well as very close to the channel entrance. The late stage of capillary filling can be described well by the Lucas–Washburn equation. The early stage was slower than predicted. We attribute the delayed filling to the velocity dependence of the contact angle and modeled the filling behaviour by dynamic wetting theories.

Graphical abstract: Transparent and airtight silica nano- and microchannels with uniform tubular cross-section

Supplementary files

Article information

Article type
Paper
Submitted
19 Apr 2013
Accepted
14 Aug 2013
First published
15 Aug 2013

Soft Matter, 2013,9, 9824-9832

Transparent and airtight silica nano- and microchannels with uniform tubular cross-section

L. Mammen, P. Papadopoulos, K. Friedemann, S. Wanka, D. Crespy, D. Vollmer and H. Butt, Soft Matter, 2013, 9, 9824 DOI: 10.1039/C3SM51082D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements