Issue 4, 2001

Abstract

Complexometric equilibrations were performed with six chelating reagents to mobilise Cu, Mn, Pb and Zn from a contaminated urban soil. The metal-laden aqueous extract was treated with sodium diethyldithiocarbamate (DEDTC) to precipitate the heavy metals from solution while liberating the chelating reagent. The aqueous supernatant fraction was then re-combined with the soil particulates to extract more pollutants. A sparing quantity of EDTA (ethylenediaminetetraacetic acid; 10 mmol) mobilised 32–54% of the 5 mmol of heavy metals from the soil with three cycles but only 0.1 and 1.0% of the iron and magnesium, respectively, was removed. Whereas DPTA (1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid) and citric acid also mobilised each of the heavy metals to some extent and continued to extract these metals during all three cycles, the DTPA (diethylenetriamine pentaacetic acid), although efficient initially, could not be recycled with these conditions. ADA [N-(2-acetamido)iminodiacetate] and SCMC [(S)-carboxymethyl-L-cysteine] were selective for copper and zinc but mobilised only Cu when recycled. An alternate means of regenerating the chelating reagent involved treatment of the aqueous extract with magnesium (Mg0) granules. Excess HEDC [bis(2-hydroxyethyl)dithiocarbamate] mobilised appreciable quantities (19–57%) of heavy metals from the soil and retained its complexing activity when recycled. An appreciable fraction of the mobilised Pb and Cu and a portion of the Zn were cemented to the surfaces of the excess magnesium whereas virtually all of the Fe and Mn was removed from solution as insoluble hydroxides.

Article information

Article type
Paper
Submitted
11 Dec 2000
Accepted
08 May 2001
First published
13 Jun 2001

J. Environ. Monit., 2001,3, 411-416

Approaches to soil remediation by complexometric extraction of metal contaminants with regeneration of reagents

T. Xie and W. D. Marshall, J. Environ. Monit., 2001, 3, 411 DOI: 10.1039/B009876K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements