Issue 15, 2023

Exfoliated graphite with spinel oxide as an effective hybrid electrocatalyst for water splitting

Abstract

The aim of the conducted research was to develop hybrid nanostructures formed from MnCo2O4 and exfoliated graphite. Carbon added during the synthesis allowed for obtaining a well-distributed MnCo2O4 particle size with exposed active sites contributing to the increased electric conductivity. The influence of the weight ratios of carbon to a catalyst for hydrogen and oxygen evolution reactions was investigated. The new bifunctional catalysts for water splitting were tested in an alkaline medium with excellent electrochemical performance and very good working stability. The results for hybrid samples show better electrochemical performance compared to the pure MnCo2O4. The highest electrocatalytic activity was for sample MnCo2O4/EG (2/1), where the value of the overpotential was 1.66 V at 10 mA cm−2, and also for this sample a low value of Tafel slope (63 mV dec−1) was denoted.

Graphical abstract: Exfoliated graphite with spinel oxide as an effective hybrid electrocatalyst for water splitting

Supplementary files

Article information

Article type
Paper
Submitted
28 Jan 2023
Accepted
21 Mar 2023
First published
31 Mar 2023
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2023,13, 10215-10220

Exfoliated graphite with spinel oxide as an effective hybrid electrocatalyst for water splitting

M. Skorupska, K. Kowalska, M. Tyc, A. Ilnicka, M. Szkoda and J. P. Lukaszewicz, RSC Adv., 2023, 13, 10215 DOI: 10.1039/D3RA00589E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements