Issue 5, 2016

Superparamagnetic iron oxide nanoparticle-loaded polyacrylonitrile nanofibers with enhanced arsenate removal performance

Abstract

Novel nanocomposite sorbents of superparamagnetic iron oxide nanoparticles (SPION) supported onto electrospun polyacrylonitrile nanofibers were synthesized by a simple and scalable method. The influence of both nanofiber size and SPION loading on As(V) adsorption capacity was studied and optimization was conducted. A maximum uptake capacity of 32.5 mmol As(V) per gram SPION in batch mode tests using an extremely low loading of only 2.9 mg of SPION per gram of adsorbent was achieved. This represents a remarkable improvement of 36 times compared with SPION in suspension. The optimal material was tested in continuous flow operation mode, reaching an adsorption capacity of 851.7 mg As(V) per gram of adsorbent at pH 3.8. It is also demonstrated that the new adsorbents can retain high performance when tested under real conditions using polluted wastewater from a lixiviation dump containing a large amount of competing anions (Cl and F ) and interfering cations (K+, Na+, Mg2+, and Ca2+). Furthermore, there was no release of nanoparticles observed during the operation and the spent porous material can be compressed, generating a small amount of solid waste that can be easily treated or stored.

Graphical abstract: Superparamagnetic iron oxide nanoparticle-loaded polyacrylonitrile nanofibers with enhanced arsenate removal performance

Supplementary files

Article information

Article type
Paper
Submitted
13 Jun 2016
Accepted
17 Aug 2016
First published
05 Sep 2016

Environ. Sci.: Nano, 2016,3, 1165-1173

Superparamagnetic iron oxide nanoparticle-loaded polyacrylonitrile nanofibers with enhanced arsenate removal performance

D. Morillo, M. Faccini, D. Amantia, G. Pérez, M. A. García, M. Valiente and L. Aubouy, Environ. Sci.: Nano, 2016, 3, 1165 DOI: 10.1039/C6EN00167J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements