Issue 64, 2014

Evolution of cellulose into flexible conductive green electronics: a smart strategy to fabricate sustainable electrodes for supercapacitors

Abstract

The integration of native polymers with electronic elements to form green electronics will be the subject of intense scientific research. In this work, conductive cellulose composite films have been prepared by in situ polymerization of aniline monomers in the cellulose scaffolds. The effects of reaction time, different dopants and the concentration of aniline monomer on the structure and properties of the composite films have been investigated. With the optimized reaction protocols, the structurally defined polyaniline (PANI)/cellulose composite films with PANI content of only about 24.6% exhibited electrical conductivity as high as 0.06 S cm−1, which could be compared with that of pure PANI. The PANI/cellulose films integrated the merits of cellulose and conductive polyaniline. The composite films with electrical conductivity performance were foldable and could be used as flexible electrode materials for supercapacitors. The specific capacitance of the films was about 120–160 F g−1 at current densities ranging from 0.1 to 0.5 A g−1 in the supercapacitor, and it maintained at least 81% after 1000 cycles at a current density of 0.5 A g−1. The straightforward fabrication of the cellulose-based conductive films represented not only a novel scientific approach for supercapacitor-based energy storage materials, but also an emerging area of research aimed at identifying compounds of natural origin and establishing economically efficient routes for the production of environmentally safe (biodegradable) and/or biocompatible devices.

Graphical abstract: Evolution of cellulose into flexible conductive green electronics: a smart strategy to fabricate sustainable electrodes for supercapacitors

Article information

Article type
Paper
Submitted
12 Jul 2014
Accepted
24 Jul 2014
First published
25 Jul 2014

RSC Adv., 2014,4, 34134-34143

Author version available

Evolution of cellulose into flexible conductive green electronics: a smart strategy to fabricate sustainable electrodes for supercapacitors

S. Liu, T. Yu, Y. Wu, W. Li and B. Li, RSC Adv., 2014, 4, 34134 DOI: 10.1039/C4RA07017H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements