Abstract
D-glucose derivatives of dihydropyrido-[2,3-d:6,5-d′]-dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone (GPHs) have been synthesized and investigated as corrosion inhibitors for mild steel in 1M HCl solution using gravimetric, electrochemical, surface, quantum chemical calculations and Monte Carlo simulations methods. The order of inhibition efficiencies is GPH-3 > GPH-2 > GPH-1. The results further showed that the inhibitor molecules with electron releasing (-OH, -OCH3) substituents exhibit higher efficiency than the parent molecule without any substituents. Polarization study suggests that the studied compounds are mixed-type but exhibited predominantly cathodic inhibitive effect. The adsorption of these compounds on mild steel surface obeyed the Langmuir adsorption isotherm. SEM, EDX and AFM analyses were used to confirm the inhibitive actions of the molecules on mild steel surface. Quantum chemical (QC) calculations and Monte Carlo (MC) simulations studies were undertaken to further corroborate the experimental results.
Similar content being viewed by others
Introduction
Mild steel is frequently used as a construction material in different industries due to its low cost and high mechanical strength. However, it is prone to corrosion in aqueous environment, especially acidic solution, which is usually involved in industrial exercises such as acid pickling, industrial acid cleaning, acid descaling and oil well acidizing processes1,2. Heterocyclic compounds have been reported as effective corrosion inhibitors because they can easily adsorb on metallic surface via their π- and non-bonding electrons, aromatic rings and polar functional groups, which act as adsorption centers3,4,5,6,7,8,9. Many of these heterocyclic compounds can be synthesized through various economically viable methods3.
Recently, green chemistry has attracted a great deal of attention because of the increasing needs to reduce environment pollution and to minimize side effects on human health10,11. Keeping this in mind, the current work in the field of corrosion inhibition is also directed towards the development of corrosion inhibitors using the principles of “green chemistry”. This includes the use multicomponent reactions (MCRs), which combines three or more reactants in one step. MCRs has proven to be a powerful tool in organic synthesis due to its operational simplicity, small number of steps, facile automation, and minimized waste generation. MCRs as a synthetic method also saves time and enhances atom economy12,13.
Carbohydrates are naturally occurring environmentally sustainable materials with several fascinating properties such as availability and high solubility in the polar solvents. This is due to the presence of a large number of hydroxyl (-OH) groups in their molecules14,15,16,17,18,19,20. Carbohydrate derivatives exhibit excellent therapeutic action against HIV infection, cancer, diabetes, etc. in addition to their antibiotics, anti-inflammatory, antimalarial, antiviral, and glycosylation inhibitors properties21,22,23. The chemicals derived from carbohydrates are also widely used in our day to day life as cosmetics, detergent, food, cloths, sweetening agent, lumber paper and so on22,23. Moreover, chemical transformations that involve using hexoses particularly glucose together with other biologically and industrially useful chemicals has become a top research topic in the recent time. This is because hexoses are comparatively more abundant and remains one of the primary renewable resources based natural feedstock chemicals24,25. Careful examination of the literature revealed that carbohydrates and their derivatives such as chitosan show excellent corrosion inhibiting properties26,27,28.
Carbohydrates and their derivatives have occupied central place in different fields of chemistry and their synthesis based on MCRs are considered to be one of the most versatile green and economic methods for synthesis of various heterocyclic compounds. In continuation of our works on corrosion inhibition property of carbohydrate based corrosion inhibitors8, the present study considers the synthesis and investigation of corrosion inhibition effect of three novel D-glucose derivatives of dihydropyrido [2,3-d:6,5-d′] dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone namely, 5-((1S,2R,3R,4R)-1,2,3,4,5-pentahydroxypentyl)-10-phenyl-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2,4,6,8 (1H,3H, 5H,7H)- tetraone (GPH-1), 10- (4-hydroxy phenyl)- 5-((1S, 2R, 3R, 4R) -1,2,3,4,5-pentahydroxypentyl)-9,10-dihydropyrido [2,3-d:6,5-d′] dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone (GPH-2) and 10- (4-(methoxyphenyl)-5-((1S, 2R, 3R, 4R)-1, 2, 3, 4, 5-pentahydroxypentyl)-9,10-dihydropyrido[2,3-d:6,5-d′]dipyrimidine-2, 4, 6, 8(1H, 3H, 5H, 7H)-tetraone (GPH-3). The synthesized compounds were tested as prospective inhibitors of mild steel corrosion in hydrochloric acid using gravimetric, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), quantum chemical calculations and Monte Carlo simulations techniques. To the best of our knowledge, these compounds have not been tested as corrosion inhibitors in any previous work.
It is worthy of mention that glucose based compounds were chosen as corrosion inhibitors in this study because, precursors such as glucose and aniline are readily available and relatively cheaper. The cost of glucose is ≈460 Rs./Kg as compared to the glucosamine (≈80,000 Rs./Kg) used in our earlier study8. Moreover, our previous study on glucosamine based compounds involved the use of benzaldehyde derivatives in place of aniline derivatives (used in the present study). Meanwhile, benzaldehyde and its derivatives are relatively more expensive than anilines as the estimated cost of benzaldehyde is 860 Rs./Lt, whereas the estimated cost of aniline is 800 Rs./Lt. The results of the weight loss, electrochemical, surface and computational analyses were in good agreement.
Experimental Procedures
Materials
Synthesis of D-glucose derivatives of dihydropyrido [2,3-d:6,5-d′] dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone (GPHs)
The inhibitor molecules used in the present study were synthesized according to method described previously29. The experimental procedure involves stirring of 5 mL ethanolic solution of barbituric acid (2 mmol), glucose (1 mmol), aniline (1 mmol), and PTSA (0.1 g) at 50 °C for 24 h. The reaction mixture was cooled to room temperature after completion. Reaction completion was confirmed by TLC method using EtOAc-MeOH as eluent. The reaction mixture was filtered and crude product was washed three times with ethanol (3 × 5). The chemical structures, IUPAC names, abbreviations used for the synthesized D-glucose derivatives of dihydropyrido [2,3-d:6,5-d′] dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone (GPHs) are given in Table 1 and spectral data are given in Fig. S1 (Supplementary information). The synthetic scheme for the compounds is shown in Fig. 1.
Synthetic scheme for the investigated inhibitors (GPHs).
Electrodes and reagents
Mild steel specimens used as test materials contain carbon (C; 0.076%), manganese (Mn, 0.192%), phosphorus (P; 0.012%), silicon (Si; 0.026%), chromium (Cr; 0.050%), aluminum (Al; 0.023%), and the balance being iron (Fe). The mild steel specimens were polished with different grades of emery papers, washed with deionized water, degreased with acetone, dried under hot air blower and stored in desiccators. The gravimetric, electrochemical and surface measurements were carried out in the test solution of 1M HCl, which was prepared by dilution of 37% HCl (MERCK) with double deionized water. The volume of test solution for each measurement was 100 ml.
Methods
Weight loss measurements
The mild steel specimen used for the weight loss experiments was 2.5 × 2.0 × 0.025 cm3 dimension. The specimens were immersed in 100 ml of 1M HCl for 3 h in the absence and presence of several concentrations of the inhibitor molecules. The specimens were taken out after elapsed time and weighed accurately in order to determine the inhibition efficiency (η%) and surface coverage (θ) by employing following equations30,31:
where, the weight losses of the mild steel specimens in the absence and presence of inhibitor molecules are denoted by w0 and wi, respectively.
Electrochemical measurements
The electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements were carried out according to the procedure described elsewhere30,31. Similar to the weight loss experiments, the specimens were cleaned, washed, dried and stored in moisture free desiccators before starting the experiments. The typical procedure used for electrochemical measurements in the present study involved the combination of one sided 1 cm2 exposed surface area of the mild steel, 1 cm2 exposed area of pure platinum foil and saturated calomel electrode as working, counter and reference electrodes, respectively. These experiments were performed under potentiodynamic condition by employing the Gamry Potentiostat/Galvanostat (Model G-300) instrument. The electrochemical data were analyzed using Gamry Echem Analyst 5.0 software. The potentiodynamic polarization nature of mild steel in absence and presence of inhibitor molecules was investigated by varying the electrode potential from −0.25 to +0.25 V vs. corrosion potential (Ecorr) at a constant sweep rate of 1.0 mV s−1. Corrosion current density (icorr) was obtained by extrapolating the linear anodic and cathodic segments of the Tafel curves to the corrosion potential, and the inhibition efficiency (η%) was calculated using the values of icorr according to the equation30,31:
where, 
and 
are corrosion current values in the absence and presence of inhibitor molecules respectively.
An AC signal of 10 mV peak-to-peak under frequency range of 100 kHz to 0.01 Hz at open circuit potential (OCP) was used to carry out electrochemical impedance measurements. The percentage inhibition efficiency (η%) of an inhibitor molecule was calculated from the values of charge transfer resistances (Rct) according to the equation30,31:
where, 
and 
are charge transfer resistance values in the absence and presence of inhibitor molecules respectively.
SEM measurements
The test material was cleaned, washed and dried similar to the procedure described in weight loss and electrochemical sections. The specimens were immersed in 100 mL test solution without and with optimum concentrations of the inhibitor molecules for 3 h. Thereafter, the specimens were taken out and their surface morphologies were assessed using SEM, EDX and AFM methods. At 500x magnification the surface morphology of the specimens by SEM method was evaluated using SEM model Ziess Evo 50 XVP instrument. The high energy dispersive X-ray spectroscopy (EDX) coupled with SEM was used to determine the elements present on the inhibited and uninhibited metallic surfaces. Whereas, surface morphology of the inhibited and uninhibited mild steel using AFM method was determined by employing NT-MDT multimode AFM, Russia, 111 controlled by solvers canning probe microscope controller instrument.
Computational Methods
Quantum chemical calculations
The geometries GPH-1, GPH-2 and GPH-3 molecules were optimized to obtain the most stable ground state geometry based on lowest total energy. The initial geometry was obtained using ACD/Chem Sketch, an integrated software package from Advanced Chemistry Development, Inc. Then the structure was relaxed by applying the ab initio formalism implemented in GAMESS program package32,33. The minimum of the potential energy surface was calculated at restricted Hartree-Fock (RHF) level34 for neural molecules and at unrestricted Hartree-Fock (UHF) level for protonated ones with the 6-311G basis set in C1 symmetry. The quadratic approximation (QA) optimisation algorithm35 based on augmented Hessian techniques was used to reach the equilibrium geometry. The procedure was performed for molecules in vacuum as well as in water solution. In the latter case, the conductor-like PCM model (C-PCM)36,37,38 was used. The gradient convergence tolerance was chosen to be equal to 10−4 Hartree/Bohr. At the end of geometry search, the Hessian evaluation was performed to exclude the structures giving negative modes and ensure the thermodynamic equilibrium of the molecules.
The molecular structures with optimized geometries were used to calculate salient electronic properties. The electronic properties were computed for the neutral and protonated forms of the isolated molecules, and the neutral form in water phase. The calculations were carried out using the density functional theory (DFT) with B3LYP39,40,41 functional as implemented in GAMESS program package. The single point calculations were performed with 6-311G basis set augmented by polarisation and diffusion functions (6-311++G**)42,43,44. The RHF and UHF SCF energy convergence criterion was chosen to be equal to 10−12 Hartree.
Monte Carlo simulations
Adsorption of the GPH-1, GPH-2 and GPH-3 molecules at the (110) surface of Fe single crystal was investigated using Adsorption Locator module developed in BIOVIA Materials Studio programme package. The simulations were performed to find the preferential adsorption sites as well as adsorption energies of investigated molecules at the surface of the Fe crystal. The crystal structure of the Fe was build using builder module of Materials Studio. The Fe unit cell was formed in Im-3m space group with parameters a = b = c = 286.65 pm and α = β = γ = 90.00° 45. From the bulk material the (110) surface of Fe was specified. As the next step the adsorption of the GPH molecules at the Fe (110) surface was simulated in periodic boundary condition. To find the most stable adsorption sites series of total energy calculations using Adsorption Locator module were performed applying parameters as follow: the energy convergence criterion 10−4 kcal/mol, max force 0.005 kcal/mol/Å, max displacement = 0.005 Å utilizing Monte Carlo procedure with Dreiding force field46. The electrostatic interactions were calculated with Ewald method applying accuracy equal to 10−4 kcal/mol, charge group cut-off 15.5 Å and buffer width 0.5 Å. The van der Waals interactions were calculated using atom based summation method. The truncation was performed by cubic spline method with spline width equal to 1 Å and cut-off distance 15.5 Å.
Results and Discussion
Weight loss experiments
Effect of inhibitors concentration
Effect of concentrations on the inhibition efficiency of mild steel corrosion in 1M HCl is given in Table 2 and Fig. S2a (Supplementary information).
Inspection of the results show that inhibition performance of the studied compounds increases with increasing concentrations. It is attributed due to increase in the effective surface coverage (η%/100). The highest value of inhibition efficiencies, namely of 93.91%, 95.21% and 97.82% were obtained at 10.15 × 10−5 molL−1 concentration for GPH-1, GPH-2 and GPH-3, respectively. Further, enhancement in the concentrations did not cause any significant change in the inhibition efficiency indicating that 10.15 × 10−5 molL−1 is optimum concentration. The inhibition efficiency of the three studied molecules follows the order: GPH-3 > GPH-2 > GPH-1. This order of inhibition efficiency can be explained by the presence of the end-group attached to the phenyl ring of the aniline moiety. The higher inhibition performance of the GPH-2 and GPH-3 as compared to GPH-1 is attributed to presence of electron releasing hydroxyl (in GPH-2) and methoxy (in GPH-3) substituents at the 4th position of the phenyl ring of the aniline moiety. These electron releasing groups in GPH-2 and GPH-3 increase the electron donating ability of inhibitor molecules toward the metallic surface by increasing their conjugations owing to presence of unshared electron pairs on the oxygen atoms and therefore enhances the inhibition performance47,48. Moreover, the higher inhibition efficiency of GPH-3 compared to GPH-2 might be attributed to presence of methoxy (-OCH3) group at 4th position of the phenyl ring of aniline moiety in GPH-3 which has higher electron releasing tendency as compared to the hydroxyl (-OH) group present at 4th position of the phenyl ring of aniline moiety in GPH-231,47,48,49.
Effect of temperature
The weight loss experiments was also performed at different temperature ranging from 308 to 338 K in order to study the effect of temperature on the inhibition performance of the GPH inhibitor molecules and also to derived selected kinetic as well as thermodynamic parameters. The results are depicted in the Table 3 and Fig. S2b (Supplementary information) indicating that inhibition performance of the GPH molecules decreases with increasing solution temperatures.
The decreased inhibition efficiency on elevating the solution temperature might be due to increase in the mobility of the inhibitor molecules which in turn decreases the interaction between metallic surface and inhibitor molecules50,51. Moreover, rapid etching, molecular rearrangement and/or fragmentation and desorption of the adsorbed inhibitor molecules at elevated temperature may also decrease the inhibition efficiency47,48,49. The Arrhenius equation can be used successfully to explain the effect of temperature on the inhibition performance of studied compounds. It is represented by following equation30,47,48,49:
where, CR represents the corrosion rate in mg cm−2 h−1, A represents the Arrhenius pre-exponential factor, Ea denotes the apparent activation energy, R is the universal gas constant and T represents the absolute temperature. The values of apparent activation energy in the absence and presence of inhibitor molecules was calculated from the slope (−∆Ea/2.303R) values of Arrhenius plots represented in Fig. 2. The values of Ea were 70.55, 74.04 and 92.22 kJmol−1 for GPH-1, GPH-2 and GPH-3, respectively. It can be seen from the results that values of Ea in presence of inhibitor molecules were much higher than the blank (28.48 kJmol−1) which clearly indicates that in presence of inhibitor molecules more energy barrier have been achieved for metallic corrosion owing to the formation of inhibitors protective film, which eventually decreases the corrosion rate52.
Arrhenius plots for the corrosion of mild steel in 1 M HCl without and with the inhibitors.
Adsorption isotherm
The adsorption of the inhibitor molecules on the solid metallic surfaces is an important process that is associated with their inhibition efficiency. Depending upon the nature of adsorbent and adsorbate, the adsorption may be physical or chemical. Several adsorption isotherms were suggested to describe the adsorption process. In our present case, among various tested isotherm, the Langmuir isotherm gave the best fit. The best adsorption isotherm in the present study was chosen based on the value of regression coefficient (R2) for each tested isotherm. The values of R2 were most close to one for Langmuir adsorption isotherm. The value of regression coefficient slopes and intercept derived for Temkin, Freundlich and Langmuir adsorption isotherms are given in Table S1 (Supplementary Information). From the results it can be seen that although the values of R2 were more close to unity for Langmuir adsorption isotherm compared to Temkin and Freundlich adsorption isotherms, however the Langmuir isotherm is not strictly followed as the values of slopes are significantly deviated from unity (Table S1). The intermolecular interaction between adsorbed inhibitor molecules, which is, not considered during formulation of Langmuir adsorption isotherm equation, may be one of the reasons for this deviation53,54. The Langmuir isotherm is based on the hypothesis that there exists an equivalent number of active sites where only one molecule of adsorbate may be adsorbed to the metallic surface of the adsorbent. The Langmuir isotherm can be represented as follows48,49:
In the above equation, Kads represents the adsorption-desorption constant, C represents the concentration of the inhibitor, θ is the surface coverage (θ = η%/100). The values of Kads for studied inhibitor molecules at different temperature were obtained with help of Langmuir isotherm plots shown in Fig. 3. The Temkin and Frumkin isotherms are shown in Fig. S3 (Supplementary information). The value of standard free energy of adsorption (
) depends upon value of Kads according to the following relation:
Langmuir adsorption isotherm plots for the adsorption of GPHs on mild steel surface in 1 M HCl at 308 K temperature.
In the above relationship the numerical value 55.5 represents the water concentration in acidic solution. The values of (
) and Kads are represented in Table 4.
for mild steel in absence and presence of optimum concentration of GPHs in 1 M HCl at different studied temperature.The value of (
) gives information about interaction between inhibitor molecules and metallic surface. Generally, the value of (
) −20 kJmol−1 or less negative is associated with electrostatic interaction (physisorption) between oppositively charged inhibitors and metallic surface55,56, while the value of (
) −40 kJmol−1 or more negative is connected with sharing of charges (chemisorption) between inhibitors and metallic surface55,57,58. From the results depicted in Table 4 it can be seen that values of (
) in our present measurement range from 33.72 kJmol−1 to 38.19 kJmol−1 indicating that GPH molecules interacted with the mild steel surface by both physisorption and chemisorption modes47,48,49,55,57,58,59,60.
Electrochemical measurements
Polarization studies
The anodic and cathodic polarization curves for inhibited and uninhibited mild steel specimens were recorded in order to determine the electrochemical nature of studied inhibitor molecules. These polarization curves are shown in Fig. 4. For the inhibited and uninhibited metallic specimens, the values of Tafel polarization parameters including the anodic and cathodic Tafel slopes (βa and βc respectively) and corrosion current density (icorr) were obtained by extrapolating the linear segments of the anodic and cathodic Tafel curves to the corrosion potential (Ecorr). The percentages of inhibition efficiency along with the evaluated parameters are given in Table 5. From the results shown in Fig. 4 and Table 5 it can be seen that presence of inhibitors exerted significant effect on both anodic and cathodic reactions indicating that studied inhibitors retarded the both anodic metallic dissolution and cathodic hydrogen evolution. Further, from Table 5 it can also be seen that presence of inhibitors decreases the value of corrosion current density (icorr); the maximum decrease in icorr value was observed at 10.15 × 10−5 mol/L concentration. The decreased value of icorr in presence of inhibitors particularly at higher inhibitors concentrations is mainly attributed due to adsorption on inhibitor molecules over the metallic surface61. Whether, an inhibitor is anodic, cathodic or mixed type is determined by the displacement in the value of Ecorr, if the displacement in the value of Ecorr for inhibited specimen is more than 85 mV as compared to the Ecorr value of uninhibited specimen then the inhibitor can be categorized as anodic or cathodic type. However, if the displacement in the Ecorr value is less than 85 mV then the inhibitor can be categorized as mixed type61,62,63. In our present study, the values of Ecorr show irregular trends. The results depicted in Table 5 showed that values of βc are more affected as compare to the values of βa indicating the studied inhibitors act as cathodic type inhibitors47,48,49,61,62,63.
Potentiodynamic polarization curves for mild in the absence and presence of optimum concentrations of the studied inhibitors (GPHs).
Electrochemical impedance spectroscopy studies
The EIS is an important technique to monitor in situ electrochemical changes and also to develop understanding of the physical processes taking place at the metal/electrolyte interface47,49,62. Typical Nyquist plots for mild steel corrosion in the absence and presence of different concentrations of the studied inhibitor molecules is shown in Fig. 5. The impedance spectra for inhibited and uninhibited specimens give signal capacitive loop which indicates that studied inhibitor molecules behave as interface inhibitors i.e. they inhibit corrosion by adsorbing at metal/electrolyte interface63,64. The EIS parameters were obtained by analyzing the experimental EIS spectral with the aid of suitable equivalent circuit. The adopted equivalent circuit consists of Rs (solution resistance of the electrolyte), in series with parallel arrangement of Rct (charge transfer resistance) and constant phase element (CPE) as contained in literature64,65. Charge transfer from the anode to the cathode, which results in oxidation of the metal is often somewhat restricted by the solvent molecules of the aqueous acid solution. This resistance by the electrolyte solution is referred to as the solution resistance (Rs). The charge transfer resistance (Rct) refers to the ability of the protective film of organic molecules adsorbed on metallic surface to impede the transfer of charges across the metal/solution interface. For better approximation of impedance data, the capacitance was replaced by constant phase element (CPE)48,49,65. The CPE is defined in impedance representation as:
Nyquist plot for mild steel in 1 M HCl in the absence and presence of optimum of concentrations of GPHs.
where, Y0 represents the CPE constant, ω is the angular frequency; j represents the imaginary number (i.e. i2 = −1) and n is the exponent (phase shift) which measure of surface inhomogeneity.
Generally, higher value of n is associated with lower surface roughness and vice versa. Moreover, the nature of CPE can also be explained based on the values of phase shift (n) and the CPE constant (Y0) for example n = 0 and Y0 = R represents the resistance, n = 1 and Y0 = C represents the capacitance, n = −1 and Y0 = 1/L represents the inductance, and n = 1/2 and Y0 = W represents the Warburg impedance (Zw)8,47,48,49. The following equation was used to calculate the double layer capacitance (Cdl)66:
where, ωmax represents the frequency at which the imaginary quantity of impedance has gained the maximum (rad s−1) value. The parameters derived from electrochemical impedance data are presented in Table 6. Careful examination of the results revealed the significant increase in the value of Rct in presence of inhibitor molecules which is attributed due to adsorption of inhibitor molecules on the metallic surface56,67. Further, decreased value of Cdl in presence of inhibitor molecules is attributed due to decrease in dielectric constant and/or increase in the thickness of electric double layer56,67. Moreover, closeness of n values to the unity clearly suggests that electric double layer form over the metallic surface is of capacitive nature.
In order to further study the electrochemical nature of studied inhibitor molecules, the Bode impedance and phase angle plots for inhibited and uninhibited metallic specimens were recorded and given in Fig. 6. The ideal capacitive behavior which is characterized by value of slope as unity and phase angle −90° 47,49, however, the deviation occurs in our present case as the values of slope and phase angle nearly were 0.85 and −70°, respectively. Values of slope, intercept, and regression coefficient and phase angle are given in Table S2. Deviation from the ideal capacitive behavior of the electric double layer in present case could be possible as result of surface inhomogeneity. The corrosion of metallic surface also resulted into the surface inhomogeneity. The Bode plots depicted in Fig. 6 it can be seen that values of phase angle for inhibited specimens are much higher than the uninhibited specimen. The increased values of phase angle for inhibited specimens indicated that surface becomes appreciably smooth owing to the formation of protective film by inhibitors over the metallic surface47,49,56. The broadening of the single maximum in the Bode plots further supports the protective film formation by inhibitor molecules47,49,56.
Bode plots for mild steel in 1 M HCl in the absence and presence of optimum of concentrations of GPHs.
Surface measurements
SEM and EDX analyses
Scanning electron microscopy (SEM) along with energy dispersive X-ray (EDX) spectroscopy is most widely used and best known surface analytical method for surface characterization. Generally, SEM analysis provides high resolution images of the surface and EDX analysis provides elemental identification in addition to quantitative compositional information. The SEM micrographs of inhibited and uninhibited metallic surface are given in Fig. 7 and their corresponding EDX spectra are given in Fig. S4 (Supplementary Information). The SEM micrograph of uninhibited mild steel surface showed highly corroded and damaged area along with pits and cracks which is attributed due to acid attack of metal. However, SEM images of the inhibited metallic surface are comparatively smoothed. The smoothed surface of the mild steel specimens in presence of inhibitor molecules is attributed due to their adsorption on the metallic surface. Moreover, film forming tendency of the inhibitor molecules was supported by EDX spectra of the inhibited and uninhibited mild steel surface (Fig. S4). Inspection of the EDX spectrum for uninhibited specimen shows characteristic signals for carbon, iron and oxygen. The presence of signal corresponding to oxygen in the EDX spectrum is might be attributed due to formation of oxide layer during the SEM/EDX operation. However, the EDX spectra for inhibited specimens showed additional signal for nitrogen which suggests the presence of inhibitor molecules over the mild steel surface. Moreover, increased intensity of signal corresponding for oxygen for inhibited specimens also indicated the film formation ability of these molecules.
SEM images of mild steel surfaces: in 1 M HCl without GPHs (a), in 1 M HCl in the presence of optimum concentration of GPH-1 (b), GPH-2 (c), and GPH-3 (d).
Atomic force microscopy (AFM)
Nowadays, AFM has become a powerful technique and new choice to study the influence of inhibitor on the corrosion of metal in various electrolytic media. The AFM micrographs of inhibited and uninhibited metallic specimens are given in Fig. 8. Careful examination of surface morphology of the uninhibited mild steel specimen (Fig. 8a) revealed that the metallic surface is highly corroded and damaged. This finding suggests that the metallic surface is highly corroded due to free acid corrosion in uninhibited solution.
AFM images of mild steel: (a) in 1 M HCl in the absence of GPHs, and in the presence of optimum concentration of (b) GPH-1, (c) GPHB-2, and (d) GPH-3.
The calculated average surface roughness of uninhibited mild steel specimen was 390 nm. However, the AFM micrographs of inhibited specimens (Fig. 8b–d) show remarkable smoothness in the surface morphology. The calculated average surface roughness’s were 154 nm, 138 nm and 116 nm for inhibited mild steel specimens for GPH-1, GPH-2 and GPH-3, respectively. This significant improvement in the surface morphology of the inhibited mild steel specimens revealed that studied inhibitor molecules form protective surface covering that isolates the metal from electrolyte and save from corrosion.
Computational studies
Quantum chemical calculations
The investigated molecules GPH-1, GPH-2 and GPH-3 differ from one to another by the end group attached to the phenyl ring of the aniline moiety. In consequence of geometry optimization procedure one may conclude that the skeleton of the investigated molecules is planar and the phenyl group is twisted depending on the supplementing hydroxyl or methoxy group. The substituents also change the electronic properties of the molecules. The electronic properties of the GPHs were calculated applying DFT/B3LYP potential with 6−311++G** basis set. The highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) studied for inhibitor molecules in vacuum, water and protonated forms are shown in Fig. 9. The calculated parameters such as energy of frontier molecular electrons belonging to HOMO and LUMO level EHOMO and ELUMO, respectively, the ΔE = ELUMO − EHOMO, dipole moment (μ) and electronegativity (χ) are presented in Table 7. The value of EHOMO energy which indicates electron donating ability of the inhibitor molecules, in our present case obeyed the order: GPH-3 > GPH-2 > GPH-1. It clearly indicates that GPH-3 molecule has strongest electron donating tendency while for the GPH-1 mentioned parameter is the smallest68,69. The trend of values of EHOMO observed for studied inhibitor molecules well supports their experimentally measured inhibition efficiency. The electron releasing groups (hydroxyl and methoxy) in GPH-2 and GPH-3 increase the electron donating ability of inhibitors as it was shown in paragraph 3.1.1.
Shape of the HOMO and LUMO orbitals calculated for neutral and protonated molecules in vacuum and neutral molecules in water using DFT/B3LYP methodology.
In contrast to EHOMO, value of ELUMO is a measure of electron affinity of the inhibitor molecule68,69. In our present case, values of ELUMO did not show any regular trends. Moreover, ΔE is another important parameter which describes the interaction between inhibitor molecule and metallic surface. Generally, an inhibitor with lower value ΔE is consisted with high chemical reactivity and therefore associated with higher inhibition performance as compare to an inhibitor with high value of ΔE. The investigated inhibitor molecules GPH-1, GPH-2 and GPH-3 have almost the same electronic energy gap (ΔE) in the range of 4.5 eV. The relative electron donating ability of the studied inhibitor molecules can also be described with the help of their electronegativity (χ). In general, an inhibitor molecule with lower electronegativity (χ) is associated with higher electron donating tendency and therefore exhibited higher inhibition efficiency as compare to an inhibitor with higher value of electronegativity. In our present case values of electronegativity follows the trends: GPH-1 > GPH-2 > GPH-3, which converse with the order of inhibition efficiency and well support the experimental trend. The dipole moment is an important parameter which can be used in order to correlate relative interaction of inhibitor molecules with the metallic surface. Generally, an inhibitor with higher value of dipole moment is consisted with higher polarizability and higher effective surface area and therefore would be better corrosion inhibitor as compare to the inhibitor molecule with lower value of dipole moment. In the present case, the value of dipole moment of studied inhibitor molecules follows the order: GPH-3 > GPH-2 > GPH-1, which implies that GPH-3 has maximum effective surface area and would be best inhibitor among the studied compounds. Moreover, from Table 7 it can be seen that the values of dipole moment for studied inhibitor molecules are higher as compare to the value of dipole moment of water (1.85 Debye) indicating that these inhibitors have greater tendency to interact with metal as compare to the water. On this basis it can be conclude that these inhibitor molecules can adsorb on the mild steel surface by replacing the previously adsorbed water molecules70,71,72. Almost similar trends of the quantum chemical calculations indices were obtained for studied inhibitor molecules for aqueous and protonated molecules. From the results depicted in Table 7 it can be seen that the protonated inhibitor molecules have higher electronegativity while water environment decreases electronegativity. From the results, it can also be observed that for all non-protonated systems the HOMO orbital are created by the same active centres’. The HOMO orbitals lie at the skeleton of the molecules. The LUMO orbitals are shifted to the phenyl ring for all three studied molecules with and without electron releasing hydroxyl and methoxy groups. For the protonated molecules GPH-1 and GPH-2 the HOMO orbital is created by the electrons from molecule skeleton and for the GPH-3 at the phenyl ring. The LUMO orbitals of the protonated molecules are located at the molecule skeleton for all studied inhibitor molecules. The water environment does not change the location of HOMO orbitals compare to non-protonated molecule in vacuum but the LUMO looks like for the protonated molecules. It is due to the electrostatic interaction between inhibitors and environment and the intra-molecular charge transfer caused by the water interaction.
Monte Carlo simulations
In order to understand the interaction between the inhibitor molecules and metal surface the Monte Carlo simulations (MC) were performed. The obtained results help to predict the most stable adsorption sites of the GPH molecules on metal surface. The top views of the density distribution of the most stable low energy configuration for the adsorption of inhibitor molecules at Fe (110) surface obtained by Monte Carlo simulations is shown in Fig. 10. The calculated data obtained by the MC simulation are presented in Table 8. The adsorption energy of the neutral molecules reproduces very well the experimental results. The large negative sign of adsorption energy (Eads) for all studied inhibitor molecules suggested that they have strong tendency of adsorption73,74. The water environment encourages absorption of molecules on the metal surface. In the Fig. 10 the density of the GPH molecules adsorption at the surface of Fe (110) is presented. One may see that the inhibitors do not prefer any special places at the iron surface. The presented surface is homogenously covered by the isodensity shapes. It is especially seen for the protonated molecules. This homogeneous distribution is caused by the lack of atomic terraces and dense packing of atoms on the studied surface. The values of adsorption energy (Eads) for neutral form of studied molecules follow the order: GPH-3 (11.88 kcal mol−1) >GPH-2 (10.65 kcal mol−1) >GPH-1 (8.35 kcal mol−1), which is consisted with experimental order of inhibition efficiency. While for protonated and aqueous form of inhibitor molecules shows almost similar trends with slight variation.
Top views of the density distribution of the most stable low energy configuration for the adsorption of inhibitor molecules at Fe (110) surface obtained by Monte Carlo simulations.
Conclusions
From the above studies on D-glucose derivatives of dihydropyrido [2,3-d:6,5-d′] dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone (GPHs) as corrosion inhibitors using gravimetric, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), quantum chemical calculations and Monte Carlo simulations techniques, it is concluded that:
(1) All studied molecules act as good inhibitors for mild steel corrosion in 1 M hydrochloric acid solution and the order of inhibition efficiencies for both gravimetric and electrochemical results is GPH-3 (97.82%) >GPH-2 (95.21%) >GPH-1(93.91%).The presence of electron releasing hydroxyl (-OH) and methoxy (-OCH3) groups in GPH-2 and GPH-3 respectively, showed the higher inhibition efficiency as compared to inhibitor without any substituents (GPH-1). Furthermore, the inhibitor molecule (GPH-3) having -OCH3 group exhibits the higher inhibition performance as compared to the inhibitor having -OH group.
(2) Adsorption of the inhibitor molecules on the metallic surface followed the Langmuir adsorption isotherm.
(3) Potentiodynamic polarization study revealed that studied inhibitor molecules acted as mixed type inhibitors but predominantly cathodic in nature.
(4) SEM, EDX and AFM analyses further confirmed the protecting ability of the inhibitor molecules.
(5) Quantum chemical calculations carried out for neutral, protonated and aqueous forms of the inhibitors supported the experimental order of inhibition efficiency. Values of EHOMO, electronegativity (χ) and dipole moment (μ) were consisted with experimental order of inhibition efficiency. Was also confirmed that inhibition increases in presence of electron releasing -OH and -OCH3 groups.
(6) Monte Carlo simulations study revealed that values of adsorption energy increased in presence of electron releasing -OH and -OCH3 groups. However, the values of Eads did not showed any regular trend for aqueous and protonated inhibitor molecules.
(7) The results of weight loss, electrochemical, quantum chemical calculations and Monte Carlo were in good agreement.
Additional Information
How to cite this article: Verma, C. et al. Corrosion inhibition of mild steel in 1 M HCl by D-glucose derivatives of dihydropyrido [2,3-d:6,5-d′] dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone. Sci. Rep. 7, 44432; doi: 10.1038/srep44432 (2017).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
Yadav, M., Behera, D. & Sharma, U. Nontoxic corrosion inhibitors for N80 steel in hydrochloric acid. Arabian J. Chem. 9 (2), S1487–S1495 (2016).
Zhao, J. et al. Cigarette Butts and Their Application in Corrosion Inhibition for N80 Steel at 90 °C in a Hydrochloric Acid Solution. Ind. Eng. Chem. Res. 49, 3986–3991 (2010).
Yadav, M., Sharma, U. & Yadav, P. N. Isatin compounds as corrosion inhibitors for N80 steel in 15% HCl. Egyptian J. Petrol. 22, 335–344 (2013).
Migahed, M. A. & Nassar, I. F. Corrosion inhibition of Tubing steel during acidization of oil and gas wells. Electrochim. Acta. 53, 2877–2882 (2008).
Chauhan, L. R. & Gunasekaran, G. Corrosion inhibition of mild steel by plant extract in dilute HCl medium. Corros. Sci. 49, 1143–1161 (2007).
Yuce, A. O. & Kardas, G. Adsorption and inhibition effect of 2-thiohydantoin on mild steel corrosion in 0.1 M HCl. Corros. Sci. 58, 86–94 (2012).
Abdallah, M., Asghar, B. H., Zaafarany, I. & Fouda, A. S. The inhibition of carbon steel corrosion in hydrochloric acid solution using some phenolic compounds. Int. J. Electrochem. Sci. 7, 282–304 (2012).
Verma, C., Ebenso, E. E., Olasunkanmi, L. O., Quraishi, M. A. & Obot, I. B. Adsorption Behavior of Glucosamine Based Pyrimidine-fused Heterocycles as Green Corrosion Inhibitors for Mild Steel: Experimental and Theoretical Studies, J. Phys. Chem. C. 120, 11598–11611 (2016).
Ahamad, I., Prasad, R. & Quraishi, M. A. Adsorption and inhibitive properties of some new Mannich bases of Isatin derivatives on corrosion of mild steel in acidic media. Corros. Sci. 52, 1472–1481 (2010).
Obi-Egbedi, N. O. & Obot, I. B. Inhibitive properties, thermodynamic and quantum chemical studies of alloxazine on mild steel corrosion in H2SO4 . Corros. Sci. 53, 263–275 (2011).
Khaled, K. F. Electrochemical investigation and modeling of corrosion inhibition of aluminum in molar nitric acid using some sulphur-containing amines. Corros. Sci. 52, 2905–2916 (2010).
Farrán, A. et al. Green Solvents in Carbohydrate Chemistry: From Raw Materials to Fine Chemicals. Chem. Rev. 115, 6811–6853 (2015).
Chatterjee, C., Pong, F. & Sen, A. Chemical conversion pathways for carbohydrates, Green Chem. 17, 40–71 (2015).
Ferreira, S. B. et al. Synthesis, Biological Activity, and Molecular Modeling Studies of 1H-1,2,3-Triazole Derivatives of Carbohydrates as α-Glucosidases Inhibitors. J. Med. Chem. 53, 2364–2375 (2010).
Stick R. V. & Williams, S. J. Carbohydrates: The Essential Molecules of Life, Elsevier. UK, 2nd Edn, 2009).
Boysen, M. M. K. Carbohydrates as synthetic tools in organic chemistry. Chem. Eur. J. 13, 8648–8659 (2007).
Gupta, S. & Abu-Ghannam, N. Bioactive potential and possible health effects of edible brown seaweeds. Trends Food Sci. Technol. 22, 315–326 (2011).
Chatterjee, C., Pong, F. & Sen, A. Chemical conversion pathways for carbohydrates. Green Chem. 17, 40–71 (2015).
Coppola, C. et al. Synthesis and NMR characterization of a novel crown ether ring-fused uridine analogue. Tetrahedron 66, 6769–6774 (2010).
Xie, J. & Bogliotti, N. Synthesis and Applications of Carbohydrate-Derived Macrocyclic Compounds. Chem. Rev. 114, 7678–7739 (2014).
Kobayashi, H. & Fukuoka, A. Synthesis and utilization of sugar compounds derived from lignocellulosic biomass. Green Chem. 15, 1740–1763 (2013).
Farrán, A. et al. Green Solvents in Carbohydrate Chemistry: From Raw Materials to Fine Chemicals. Chem. Rev. 115, 6811–6853 (2015).
Khan, M. M., Yousuf, R., Khan, S. & Shafiullah . Recent advances in multicomponent reactions involving carbohydrates. RSC Adv. 5, 57883–57905 (2015).
Amarasekara, A. S. & Razzaq, A. Mechanism of 1-(1-propylsulfonic)-3-methylimidazolium chloride catalyzed transformation of D-glucose to 5-hydroxymethylfurfural in DMSO: an NMR study. Carbohydr. Res. 386, 86–91 (2014).
Chinnappan, A., Chinnappan, B. & Kim, H. Biomass into chemicals: green chemical conversion of carbohydrates into 5-hydroxymethylfurfural in ionic liquids. RSC Adv. 6, 63991–64002 (2016).
Chen, L. et al. Ring-locking enables selective anhydrosugar synthesis from carbohydrate pyrolysis. Green Chem., 18, 5438–5447 (2016)
Climent, M. J., Corma, A. & Iborra, S. Converting carbohydrates to bulk chemicals and fine chemicals over heterogeneous catalysts. Green Chem. 13, 520–540 (2011).
Umoren, S. A. & Eduok, U. M. Application of carbohydrate polymers as corrosion inhibitors for metal substrates in different media: A review. Carbohydr Polym. 140, 314–341 (2016).
Nourisefat, M., Panahi, F. & Khalafi-Nezhad, A. Carbohydrates as a reagent in multicomponent reactions: one-pot access to a new library of hydrophilic substituted pyrimidine-fused heterocycles. Org. Biomol. Chem. 12, 9419–9426 (2014).
Al-Sabagh, A. M., Abd-El-Bary, H. M., El-Ghazawy, R. A., Mishrif, M. R. & Hussein B. M. Corrosion inhibition efficiency of heavy alkyl benzene derivatives for carbon steel pipelines in 1 M HCl. Egyp. J. Petrol. 21, 89–100 (2012).
Verma, C., Ebenso, E. E., Bahadur, I., Obot, I. B. & Quraishi, M. A. 5-(Phenylthio)-3H-pyrrole-4-carbonitriles as effective corrosion inhibitors for mild steel in 1 M HCl. Experimental and theoretical investigation. J. Mol. Liq. 212, 209–218 (2015).
Schmidt, M. W. et al. General atomic and molecular electronic structure system. J. Comput. Chem. 14, 1347–1363 (1993).
Andrés Cisneros, G. Application of Gaussian Electrostatic Model (GEM) Distributed Multipoles in the AMOEBA Force Field. J. Chem. Theory Comput. 8, 5072–5080 (2012).
Roothaan, C. C. J. New developments in molecular orbital theory. Rev. Mod. Phys. 23, 69–89 (1951).
Jensen, F. Locating transition structures by mode following: a comparison of six methods on the Ar8 Lennard-Jones potential. J. Chem. Phys. 102, 6706–6718 (1995).
Cossi, M., Scalmani, G., Rega, N. & Barone, V. New Developments in the Polarizable Continuum Model for Quantum Mechanical and Classical Calculations on Molecules in Solution. J. Chem. Phys. 117, 43–54 (2002).
Cossi, M., Barone, V., Cammi, R. & Tomasi, J. Ab Initio Study of Solvated Molecules: a New Implementation of the Polarizable Continuum Model. Chem. Phys. Lett. 255, 327–335 (1996).
Cossi, M., Rega, N., Scalmani, G. & Barone, V. J. Energies, Structures, and Electronic Properties of Molecules in Solution with the C-PCM Solvation Model. Comput. Chem. 24, 669–681 (2003).
Becke, A. D. Density-functional exchange-energy approximation with correct asymptotic behavior. Phys. Rev. A 38, 3098–3100 (1988).
Becke, A. D. Density-functional thermochemistry. III. The role of exact exchange. J. Chem. Phys., 98, 5648–5652 (1993).
Lee, C., Yang, W. & Parr, R. G. Development of the colic-salvetti correlation-energy formula into a functional of the electron density. Phys. Rev. B 37, 785–789 (1988).
Haharan, P. C. & Pople, J. A. The influence of polarization functions on molecular orbital hydrogenation energies. Theoret. Chim. Acta. 28, 213–222 (1973).
Frisch, M. J., Pople, J. A. & Binkley, J. S. Self-consistent molecular orbital methods 25. Supplementary functions for Gaussian basis sets. J. Chem. Phys. 80, 3265–3269 (1984).
Clark, T., Chandrasekhar, J., Spitznagel, G. W. & Schleyer, P. Efficient diffuse function-augmented basis sets for anion calculations. III. The 3-21+ G set for first-row elements, Li-F. J. Comput. Chem. 4, 294–301 (1983).
Kohlhaas, R., Donner, P. & N. Schmitz-Pranghe, WebElements chemistry. Z. Angew. Phys. 23, 245 (1967).
Mayo, S. L., Olafson, B. D. & Goddard, W. A. III “DREIDING: A generic forcefield”. J. Phys. Chem. 94, 8897–8909 (1990).
Singh, P., Ebenso, E. E., Olasunkanmi, L. O., Obot, I. B. & Quraishi, M. A. Electrochemical, theoretical and surface morphological studies of corrosion inhibition effect of green naphthyridine derivatives on mild steel in hydrochloric acid. J. Phys. Chem. C. 120, 3408–3419 (2016).
Verma, C., Quraishi, M., Olasunkanmi, L. O. & Ebenso, E. E. L-Proline-promoted synthesis of 2-amino-4-arylquinoline-3-carbonitriles as sustainable corrosion inhibitors for mild steel in 1 M HCl: experimental and computational studies. RSC Adv. 5, 85417–30 (2015).
Verma, C., Quraishi, M. A. & Singh, A. A thermodynamical, electrochemical, theoretical and surface investigation of diheteroaryl thioethers as effective corrosion inhibitors for mild steel in 1 M HCl. J. Taiwan. Ins. Chem. Eng. 49, 229–239 (2015).
Wadhwani, P. M., Ladha, D. G., Panchal, V. K. & Shah, N. K. Enhanced corrosion inhibitive effect of p-methoxybenzylidene-4,4-dimorpholine assembled on nickel oxide nanoparticles for mild steel in acid medium. RSC Adv. 5, 7098–7111 (2015).
Bai, L. et al. Hierarchical self-assembly, photo-responsive phase behavior and variable tensile property of azobenzene-containing ABA triblock copolymers. RSC Adv. 5, 4716–4726 (2015).
Schmid, G. M. & Huang, H. J. Spectro-electrochemical studies of the inhibition effect of 4, 7-diphenyl -1, 10-phenanthroline on the corrosion of 304 stainless steel. Corros. Sci. 20, 1041–1057 (1980).
Obot, I. B., Obi-Egbedi, N. O. & Umoren, S. A. Adsorption characteristics and corrosion inhibitive properties of clotrimazole for aluminium corrosion in hydrochloric acid. Int. J. Electrochem. Sci. 4, 863– 877 (2009).
Karthikaiselvi, R. & Subhashini, S. Study of adsorption properties and inhibition of mild steel corrosion in hydrochloric acid media by water soluble composite poly (vinyl alcohol-o-methoxy aniline. J. Assoc. Arab Univ. Basic Appl. Sci. 16, 74–82 (2014).
Goulart, C. M. et al. Experimental and theoretical evaluation of semicarbazones and thiosemicarbazones as organic corrosion inhibitors. Corros. Sci. 67, 281–291 (2013).
Verma, C. et al. Aryl sulfonamidomethylphosphonates as new class of green corrosion inhibitors for mild steel in 1M HCl: Electrochemical, surface and quantum chemical investigation. J. Mol. Liq. 209, 306–319 (2015).
Amin, M. A. & Ibrahim, M. M. Corrosion and corrosion control of mild steel in concentrated H2SO4 solutions by a newly synthesized glycine derivative. Corros. Sci. 53, 873–885 (2011).
Issaadi, S. et al. Novel thiophene symmetrical Schiff base compounds as corrosion inhibitor for mild steel in acidic media. Corros. Sci. 53, 1484–1488 (2011).
Amin, M. A. et al. Monitoring corrosion and corrosion control of iron in HCl by non-ionic surfactants of the TRITON-X series – Part II. Temperature effect, activation energies and thermodynamics of adsorption. Corros. Sci. 53, 540–548 (2011).
Bentiss, F., Lebrini, M. & Lagrenee, M. Thermodynamic characterization of metal dissolution and inhibitor adsorption processes in mild steel/2,5-bis(n-thienyl)-1,3,4-thiadiazoles/hydrochloric acid system. Corros. Sci. 47, 2915–2931 (2005).
Yıldız, R., Dogan, T. & Dehri, I. Evaluation of corrosion inhibition of mild steel in 0.1 M HCl by 4-amino-3-hydroxynaphthalene-1-sulphonic acid. Corros. Sci. 85, 215–221 (2014).
Mourya, P., Banerjee, S. & Singh, M. M. Corrosion inhibition of mild steel in acidic solution by Tagetes erecta (Marigold flower) extract as a green inhibitor. Corros. Sci. 85, 352–363 (2014).
Solmaz, R. Investigation of corrosion inhibition mechanism and stability of Vitamin B1 on mild steel in 0.5 M HCl solution. Corros. Sci. 81, 75–84 (2014).
Chevalier, M. et al. Enhanced corrosion resistance of mild steel in 1 M hydrochloric acid solution by alkaloids extract from Aniba rosaeodora plant: Electrochemical, phytochemical and XPS studies. Electrochimica Acta. 131, 96–105 (2014).
Roy, P., Karfa, P., Adhikari, U. & Sukul, D. Corrosion inhibition of mild steel in acidic medium by polyacrylamide grafted Guar gum with various grafting percentage: Effect of intramolecular synergism. Corros. Sci. 88, 246–253 (2014).
Yousefi, A., Javadian, S., Dalir, N., Kakemam, J. & Akbari, J. Imidazolium-based ionic liquids as modulators of corrosion inhibition of SDS on mild steel in hydrochloric acid solutions: experimental and theoretical studies. RSC Adv. 5, 11697–11713 (2015).
Verma, C., Quraishi, M. A., Ebenso, E. E., Obot, I. B. & El Assyry, A. 3-Amino alkylated indoles as corrosion inhibitors for mild steel in 1M HCl: Experimental and theoretical studies. J. Mol. Liq. 219, 647–660 (2016).
Sasikumar, Y. et al. Experimental, quantum chemical and Monte Carlo simulation studies on the corrosion inhibition of some alkyl imidazolium ionic liquids containing tetrafluoroborate anion on mild steel in acidic medium. J. Mol. Liq. 211, 105–118 (2015).
Kayaa, S., Tüzüna, B., Kayaa, C. & Obot, I. B. Determination of corrosion inhibition effects of amino acids: Quantum chemical and molecular dynamic simulation study. J. Taiwan Ins. Chem. Eng. 58, 528–535 (2016).
Verma, C., Olasunkanmi, L. O., Obot, I. B., Ebenso, E. E. & Quraishi, M. A. 2, 4-Diamino-5-(phenylthio)-5 H-chromeno [2, 3-b] pyridine-3-carbonitriles as green and effective corrosion inhibitors: gravimetric, electrochemical, surface morphology and theoretical studies. RSC Adv. 6, 53933–53948 (2016).
Yadav, M., Kumar, S., Kumari, N., Bahadur, I. & Ebenso, E. E. Experimental and Theoretical Studies on Corrosion Inhibition Effect of Synthesized Benzothiazole Derivatives on Mild Steel in 15% HCl Solution. Int. J. Electrochem. Sci. 10, 602–624 (2015).
Verma, C., Quraishi, M. A. & Singh, A. 2-Aminobenzene-1, 3-dicarbonitriles as green corrosion inhibitor for mild steel in 1 M HCl: Electrochemical, thermodynamic, surface and quantum chemical investigation. J. Taiwan Ins. Chem. Eng. 49, 229–239 (2015).
Chen, S., Scheiner, S., Kar, T. & Adhikari, U. Theoretical Study on Relationship Between Structure of Mercapto-Triazole Derivatives and Inhibition Performance. Int. J. Electrochem. Sci. 7, 7128– 7139 (2012).
Verma, C., Olasunkanmi, L. O., Obot, I. B., Ebenso, Eno E. & Quraishi, M. A. 5-Arylpyrimido-[4, 5-b] quinoline-diones as new and sustainable corrosion inhibitors for mild steel in 1 M HCl: a combined experimental and theoretical approach. RSC Adv. 6, 15639–15654 (2016).
Acknowledgements
Authors are grateful to the Banaras Hindu University, India, Jan Dlugosz University, Poland and North-West University, South Africa for supporting this research. L. O. Olasunkanmi and E. E. Ebenso thank the National Research Foundation (NRF) of South Africa for funding.
Author information
Authors and Affiliations
Contributions
C. Verma and M.A. Quraishi carried out the experiments. K. Kluza, M. Makowska-Jamusik, L.O. Olasunkanmi and E.E. Ebenso assisted in collation of the results and carried out the quantum chemical calculations. M. A. Quraishi and E.E. Ebenso conceptualised and designed the work and were part of the manuscript write-up. All the authors collectively wrote and contributed to the entire manuscript and have agreed to its publication.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Verma, C., Quraishi, M., Kluza, K. et al. Corrosion inhibition of mild steel in 1M HCl by D-glucose derivatives of dihydropyrido [2,3-d:6,5-d′] dipyrimidine-2, 4, 6, 8(1H,3H, 5H,7H)-tetraone. Sci Rep 7, 44432 (2017). https://doi.org/10.1038/srep44432
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep44432
This article is cited by
-
Novel pyridine bearing pentose moiety-based anticancer agents: design, synthesis, radioiodination and bioassessments
Scientific Reports (2024)
-
Experimental and computational chemical studies on the corrosion inhibition of new pyrimidinone derivatives for copper in nitric acid
Scientific Reports (2022)
-
Protection of material applied in heat exchanger under submerged jet impingement condition with Boswellia serrata: electrochemical approach
Journal of Applied Electrochemistry (2022)
-
Predicting protection capacities of pyrimidine-based corrosion inhibitors for mild steel/HCl interface using linear and nonlinear QSPR models
Journal of Molecular Modeling (2022)
-
Inhibitory influence of cationic Gemini surfactant on the dissolution rate of N80 carbon steel in 15% HCl solution
Scientific Reports (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
