Introduction

During the past two decades, mechanobiology has drawn increasing attention as an interdisciplinary forum for researchers from the fields of materials science and biomedical science. Mounting evidence suggests that biological cells not only passively sense biochemical cues but also actively react to mechanical cues from the surrounding microenvironment [1, 2]. For example, the formation of neurite branches of neuronal cells [3] and the striation of actomyosin bundles in cardiac myotubes [4] is significantly improved on hydrogel substrates possessing elastic moduli comparable to those of the native extracellular matrix. Researchers from regenerative medicine have also suggested the importance of mechanical compliance in the regulation of stem cell differentiation. Mesenchymal stem cells injected into the blood vessels of a lever undergoing fibrosis did not lead to the regeneration of hepatocytes but instead led to misdifferentiation into ductal cells [5]. In 2006, Discher and coworkers showed that the lineage-specific differentiation of somatic stem cells can be regulated by the elasticity of chemically cross-linked polyacrylamide substrates functionalized with type I collagen [6]. Although later studies have shown that substrate elasticity is important but not the only determinant for the fate of stem cells [7, 8], this study made many materials scientists aware of the crucial roles of mechanics in regulating cells. To date, a number of chemically cross-linked hydrogels have been synthesized as models of the extracellular matrix [9]. The fine adjustment of cross-linker concentrations and the reaction time [10, 11] enables the control of bulk elastic moduli (Young’s moduli) of hydrogels ex situ. Such materials have been used to gain insights into the roles of elasticity compliance between cells and the extracellular matrix in optimizing cell morphology [4, 12, 13], regulating migratory behavior [14, 15], controlling stem cell differentiation [16], and engineering tissue [17].

However, these ex situ approaches to mechanically regulate biological cells have overlooked one key aspect: the microenvironments of cells are never static but highly dynamic. Dynamic changes in extracellular matrix stiffness significantly influences various cellular functions. A number of studies have shown that remodeling of the extracellular matrix is prominent in many diseases. For example, hematopoietic diseases, such as leukemia and osteomyeloma, are accompanied by the fibrotic stiffening of bone marrow, resulting in cytopenia [18]. It has also been shown that enzymatic degradation of hyaluronic acid is enhanced during tumor growth and inflammation [19]. All these findings indicate a clear demand to design a new class of extracellular matrix models whose mechanical properties can be modulated on demand by external stimuli (Fig. 1). In this review, we will highlight recent progress in the design of stimuli-responsive hydrogel materials for the dynamic regulation of cellular functions.

Fig. 1
figure 1

Dynamic regulation of cells using materials with mechanical properties that can be altered in response to cytocompatible external stimuli

(Bio)chemical modulation of covalently cross-linked hydrogels

One straightforward strategy to change the mechanical properties of cellular microenvironments is to follow the tactics of cancer cells, i.e., enzymatic degradation. For example, a number of studies have shown that many metastatic cancers can be characterized by the overproduction of various matrix metalloproteases that digest extracellular matrix proteins [20]. The enzymatic digestion of extracellular polysaccharides, such as hyaluronic acid, exhibits a clear influence on the expression level of CD44 in various cancer cells [19]. Digestion of extracellular matrix by enzymes not only cuts biomacromolecules into smaller fragments but also reduces the density of the cross-links. This inspired material scientists to synthesize chemically or biochemically degradable hydrogel substrates. Yui et al. reported that hyaluronic acid cross-linked with glycidyl ether can be degraded by hydroxyl radicals in vitro and by inflammation in vivo [21]. Hyaluronic acid gels can be synthesized by cross-linking thiolated hyaluronic acid with poly(ethylene glycol) diacrylate [22], photopolymerizing hyaluronic acid modified with methacryloyl groups [23], or forming disulfide bonds between thiolated hyaluronic acid polymers [24, 25]. These gels can be degraded by either the biochemical degradation of hyaluronic acid backbones with hyaluronidase or the chemical cleavage of disulfide bridges with dithiothreitol.

Collagen and gelatin, which are both degraded by collagenase, have been used for various biomedical applications, such as the release of growth factors [26] and wound healing [27]. During the last two decades, many researchers have examined the combination of hyaluronic acid, collagen/gelatin, and other polymers for numerous biological and medical applications [28,29,30]. A similar strategy can also be applied to chemically cleave the covalent cross-links of hydrogels made out of synthetic polymers. For example, Kloxin et al. [31, 32] designed poly(ethylene glycol) hydrogels whose cross-linking can be cleaved by light. A unique but medically relevant strategy to cleave chemical cross-links is irradiation with gamma rays. Simmons et al. [33] reported that rat stromal cells implanted together with alginate hydrogels into severely immunodeficient mice exhibited high bone regeneration capacity by the fine adjustment of gamma ray irradiation, which can be attributed to the controlled release/diffusion of growth factors in the rapidly degrading, irradiated hydrogels. Chemical stiffening of hydrogel substrates during cell culture is more challenging because it often requires the formation of additional bonds under challenging conditions for cells, such as UV irradiation. Guvendiren and Burdick [34] proposed the use of methacrylated hyaluronic acid that can be cross-linked in two steps; the degree of the first cross-linking is controlled by the amount of dithiothreitol, whereas the remaining methacrylate groups can be cross-linked by UV irradiation. Nevertheless, it should be noted that the conditions for these stimuli must be examined very carefully in advance because it has been reported that dithiothreitol makes the bacterial cell walls porous [35], and over-irradiation of cells by UV light is known to cause apoptosis [36]. A recent account has shown that the enzymatic reaction followed by photochemical cross-linking of hyaluronic acid derivatives can also be used to stiffen hydrogels on demand [37].

Thermal modulation of hydrogels

Another useful cue to modulate the mechanical properties of polymeric materials is temperature. If one considers the applications in bioscience, one of the most widely used synthetic thermoresponsive polymers is poly(N-isopropylacrylamide) (PNIPAAm) [38]. In aqueous media, PNIPAAm undergoes a coil-to-globule transition at T* = 32–33 °C. As shown schematically in Fig. 2a, PNIPAAm is insoluble in aqueous media at T ≥ T*, taking on a collapsed coil conformation. On the other hand, when T ≤ T*, PNIPAAm becomes water soluble and takes on a globular conformation. From a thermodynamic viewpoint, the lower critical solution temperature T* (LCST) can generally be understood as the difference in the free energy change caused by mixing water with the polymer. As shown in Fig. 2b, the local stability of polymer–water mixtures can be defined by a spinodal line, which corresponds to \(\frac{{\partial ^2G}}{{\partial x^2}} = 0\). The conditions inside the curve will undergo spinodal decomposition (phase separation). On the other hand, the binodal line indicates the conditions for phase coexistence. As the mixing of polymer and water is spontaneous at \(T \le T^ \ast\), \(\Delta G_{mix} \le 0\)at \(T \le T^ \ast\), whereas \(\Delta G_{mix} \ge 0\) at \(T \ge T^ \ast\). Poorly water soluble, compact PNIPAAm is stiff and thus allows cell adhesion at \(T \ge T^ \ast\). On the other hand, PNIPAAm dissolves in water at \(T \le T^ \ast\), which results in cell detachment. Okano and coworkers prepared PNIPAAm hydrogels on the surface of culture dishes by electron beam-induced polymerization, cultured cells at \(T \ge T^ \ast\) (37 °C) to confluency, and detached a cell monolayer from the culture dishes by lowering the temperature to \(T \le T^ \ast\) (Fig. 2c) [39, 40]. This launched the large potential to harvest a two-dimensional sheet of cells without proteolytic dissociation so that one can directly transplant the cell sheet [41, 42].

Fig. 2
figure 2

a Changes in the polymer chain conformation at a lower critical solution temperature (LCST) is driven by the not energetically favored mixing entropy. b Phase diagram of an LCST polymer. c Cell sheet detachment from a thermoresponsive surface coated with the LCST polymer

Block copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) possess unique thermoresponsive properties, whose LCST can be adjusted to between 20 and 85 °C simply by changing the composition of each block [43, 44]. The aqueous solutions undergo a sol–gel transition when heated above the LCST. Some block copolymers, such as pluronics, poloxamers, and tetronics, are commercially available and used as injectable polymer therapeutics for the controlled release of proteins, drugs, and genes [45, 46]. For example, pluronic F-127, (PEO)106(PPO)70(PEO)106, can be dissolved as a clear solution of micelles at low temperature but turn into stiff gels at body temperature. Upon injection into the body, they can form protective barriers without losing the capacity to release functional entities [43, 47]. Pluronics have also been used as materials to reduce cell adhesion [48] as well as improve blood compatibility [49].

pH modulation of hydrogels

The extracellular pH level near a tumor is distinctly lower than that near normal, healthy tissue [50]. On the other hand, the intracellular pH of cancer cells is higher than the pH inside normal cells [51]. Such a reversed pH gradient in cancer cells and normal cells suggests that both the efficacy of drugs and the release of drugs from carriers strongly depend on the pH. Therefore, pH-responsive hydrogels have drawn attention as tailor-made carriers for anticancer drugs owing to their capability to release drug molecules selectively at a certain pH values [52, 53]. Anionic polyelectrolytes, such as poly(acrylic acid) and poly(methacrylic acid), have been investigated in pharmaceutical applications, as they reversibly alter the degree of ionization at acidic pH values [54, 55].

To modulate the micromechanical environment of cells without interfering with their pH viability and functionality, weak polyelectrolytes seem more advantageous compared with strong polyelectrolytes because the degree of ionization can be adjusted near physiological pH. A prominent example inspired by nature is block copolymers containing polypeptides consisting of naturally occurring, weakly acidic/basic amino acids [56, 57]. Tailor-made oligo- and polypeptides both enable the flexible adjustment of isoelectric points. By using secondary structures, such as α-helices [58], these block copolymers can self-assemble into a variety of superstructures, such as micelles [59] and vesicles [60].

Among synthetic polymers possessing pKa values in the range of 6.3–7.5, poly(2-(alkylamino)ethyl methacrylate) derivatives have been utilized to fabricate various biomaterials [61]. Armes and coworkers synthesized a variety of block copolymers containing these moieties by means of reversible-deactivation radical polymerization, such as atom transfer radical polymerization and reversible addition-fragmentation chain transfer polymerization. They reported that some of the block copolymers are able to form highly uniform and stable micelles [62, 63]. Block copolymers consisting of a pH-sensitive block and a biocompatible zwitterionic poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) block [64, 65] enable the fabrication of biocompatible and pH-responsive micelles [62], vesicles [66], and free-standing gels [67] under physiological conditions.

By choosing the optimal block ratio, monolayers [68] and hydrogels [69] on solid substrates can also be formed. For example, specular neutron reflectivity data confirmed that a few nanometer-thick monolayer of a block copolymer showed distinct switching of the film thickness by the reversible charging/decharging of pH-responsive blocks. This further enables one to reversibly switch the thickness of the water layer between a lipid membrane and the underlying substrate by a factor of almost 2 [68]. However, a few nanometer-thick monolayer system is not suited for regulation of cells because cells mechanically “feel” the underlying solid substrates possessing an elastic modulus of ~ 1 GPa. As the strain field caused by the active traction force generated by cells decays exponentially over the distance from the surface, the use of hydrogels with thicknesses larger than 1 µm is necessary to ensure that the cells feel substrate elasticity [70]. Hydrogel films of the block copolymer composed of pH-responsive and PMPC blocks can be prepared by spin-coating of methanolic solutions. After the removal of methanol, the films can be soaked and hydrated in cell culture medium. The basic building blocks of this hydrogel are formed by the physical entanglement of “flower-like” micelles of pH-responsive poly(2-(isopropylamino)ethyl methacrylate) (PDPA) surrounded by biocompatible PMPC blocks (Fig. 3a). As the pKa of the protonated PDPA homopolymer is ~6.2 [61], the mean degree of ionization of the PDPA core is lower at higher pH. The uncharged PDPA core is more compact owing to less intrachain electrostatic repulsion compared with the charged core, which results in a larger bulk elastic modulus. On the other hand, upon lowering the pH, the interaction between partially charged PDPA blocks becomes more repulsive, which results in a softer gel film. As the bulk elastic modulus of the gel is linearly proportional to pH, it is possible to reversibly soften and stiffen the hydrogel substrates between 1.4 kPa and 40 kPa by simply adjusting the pH of the culture medium between 7 and 8. Changes in the mechanical properties of contact substrates are sensed by the mechanotransduction machinery in focal adhesion complexes, which results in reversible changes in cell shape and adhesion strength without interference with cell viability (Fig. 3b) [69]. Cellular mechanosensing can be quantitatively parameterized by using the nematic order parameter of the actin cytoskeleton, \(S = \cos 2\theta\), where θ is the angle between the major axis of the cell and each actin filament [71]. Inoue et al. demonstrated that the abrupt softening of hydrogel substrates leads to a discontinuous decrease in the nematic order parameter of C2C12 cytoskeletons, suggesting that dynamic cytoskeletal remodeling can be described physically as a break of symmetry, as in quantum mechanics [72].

Fig. 3
figure 3

a ABA triblock copolymer containing the pH-responsive poly(2-(isopropylamino)ethyl methacrylate) (PDPA) block and biocompatible zwitterionic poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) block. Physical entanglement of flower micelles results in pH-responsive hydrogels. b Reversible switching of myoblast cells by the softening and stiffening of hydrogel substrates. Cells are contractile and spread on stiff substrates by gripping the substrates, but they take a round shape when the substrate elasticity is reduced from 40 kPa to 2 kPa

These hydrogel substrates can also be used for the long-term maintenance of more naive cells, such as human mesenchymal stem cells (hMSCs) derived from the bone marrow [7]. More than 90% of the mesenchymal stem cells cultured on hydrogel substrates remain immunoreactive to the multipotency marker over 20 d irrespective of the substrate elasticity, suggesting that substrate elasticity is not the only factor determining stem cell fate. Once these cultured hMSCs are transferred into differentiation induction media at t = 20 d, they can still undergo lineage-specific commitment to either adipocytes or osteoblasts. More remarkably, simply by changing the substrate elasticity every second day, the proliferation of hMSCs was significantly suppressed by up to 90% with no loss of the multiple lineage potential. However, although the modulation of pH does not interfere with the viability of stem cells, a new class of stimuli-responsive hydrogels that reversibly alter elasticity at physiological pH is safer and more useful for biomedical applications.

Chemical modulation of hydrogels cross-linked by noncovalent bonds

Many biomolecules self-assemble and build hierarchical structures via the interplay of noncovalent and hence reversible intermolecular interactions. This inspired materials scientists to design a new class of supramolecular polymers [73, 74], which are held together via reversible and highly directional noncovalent interactions, such as hydrogen bonding and host–guest interactions [75, 76]. For example, by modifying the side chains of the hosts and their complementary guest moieties, various hydrogels can be fabricated by cross-linking hydrophilic polymer chains via noncovalent, host–guest interactions. One of the unique characteristics of supramolecular hydrogels is that host–guest pairs can reversibly dissociate/associate by adding/removing competitive host (or guest) molecules to/from the solution (Fig. 4a). For example, cyclodextrins (CDs) can serve as hosts that recognize hydrophobic, organic guest molecules in aqueous solutions [77]. Such reversible, noncovalent host–guest interactions recognize materials with highly unique functionalities, such as self-healing of defects [78], repetitive contraction/expansion cycles [79], and tunable shear thinning capacity [80].

Fig. 4
figure 4

a Working principle of supramolecular hydrogels cross-linked via host–guest interactions. b The decrease in the bulk elastic modulus is linearly proportional to the log C of host/guest molecules dissolved in the medium. c Discrete and reversible control of myoblast cells on the same substrate incubated with media containing different amounts of free competitors

For the dynamic modulation of cellular micromechanical environments, supramolecular hydrogels can potentially provide an advantage over other stimuli-responsive hydrogels [80,81,82]. Compared with other stimuli, e.g., proteases, reducing agents, light, temperature, and pH, one can eliminate or minimize the risk of damaging cells by choosing host or guest molecules with no or little cytotoxicity. For example, hydrogels cross-linked with host–guest interactions between β-cyclodextrin (βCD) and adamantane have been used for the dynamic regulation of myoblast cells [83]. First, the initial substrate elasticity can be optimized by selecting the molar fraction of host and guest monomers for the target cells. By varying the concentrations of free, competing host molecules (βCD) in solution, the reversible nature of host–guest interactions enables us to flexibly adjust the extent of softening/stiffening of the hydrogel substrates. Compared with other stimuli-responsive materials that can either change the elasticity only in one direction or those that rely on less-biocompatible stimuli such as UV light and temperature changes, supramolecular hydrogels enable the reversible application of mechanical cues without interfering with cell viability. The absolute level of the elastic modulus can be adjusted by the total monomer concentration and the mixing ratio between pure (matrix) acrylamide monomers and acrylamide monomers modified with host/guest moieties. βCD has been approved as a food additive by the FDA (US Food and Drug Administration) and adamantane is not digested by cells [84, 85]. Free βCD/adamantane molecules dissolved in culture medium would lead to a decrease in the number of cross-links within 10 min by shifting the chemical equilibrium. This enables one to switch the substrate elasticity to the desired level at any time point merely by medium exchange; the decrease in elastic modulus is proportional to the chemical potential of free molecules and hence proportional to log[βCD/adamantane] (Fig. 4b). On the other hand, after soaking hydrogels in normal medium with no additives, the substrate elasticity recovers to the original level within 1 h. In the case of a hydrogel prepared with a total monomer concentration of 2 mol kg−1 containing 2.5 mol% monomers with host/guest side chain functionalities, the substrate elasticity can be fine adjusted to between 11 and 4 kPa. The elastic modulus covered by this material was suited for both static (ex situ) and dynamic (in situ) regulation of cell morphology and cytoskeletal ordering of myoblasts (Fig. 4c) [83].

Perspectives: from 2D to 3D, from isotropic to anisotropic

As shown above, stimuli-responsive hydrogel materials enable dynamic modulation of the micromechanical environment of biological cells. This becomes highly relevant in simulating the remodeling of extracellular matrix caused by diseases and aging. For biomedical studies, the choice of stimuli that can change the substrate stiffness with minimal interference to cellular functions is extremely crucial. Compared with other hydrogels that are responsive to temperature, light, pH, and enzymes, supramolecular hydrogels can potentially offer a larger degree of freedom in the choice of additives.

One natural and straightforward extension of such a strategy moves towards the development of three-dimensional cellular environments with dynamically tunable mechanical properties, modeling in vivo cellular microenvironments. Recent studies have suggested that some types of cells cultured on two-dimensional substrates do not recapitulate the phenotype of the cells in vivo [86, 87]. To date, gelatin-based materials, such as Matrigel, have been used as three-dimensional cell culture materials, and other three-dimensional culture materials based on hydrogels are currently being developed [88].

Another interesting direction is to introduce anisotropy to the model of the extracellular matrix. In our body, fibrous extracellular matrix proteins, such as collagen, often exhibit a highly anisotropic topography that dictates the morphology, directional order, and migration of cells, called contact guidance [89,90,91,92]. As nanofibers of proteins, such as collagen and gelatin, have been utilized for various applications, including wound healing and tissue engineering [88, 93, 94], protein nanofibers with stimuli-responsive functional groups seem to be a promising and biologically relevant target. Moreover, fabrication of stimuli-responsive, three-dimensional microstructures comparable to or smaller than the size of cells with advanced three-dimensional printing technology is a promising strategy to microfabricate cellular scaffolds with a defined geometry [95].

The combination of stimuli-responsive hydrogels, protein fibers, and three-dimensional scaffolds not only helps us to understand how cells react to changes in complex environments but also realizes a new class of cell culture materials with tunable mechanical properties in a well-defined geometry.