Abstract
Removal of lignin, hemicelluloses and other minor components during pulping results in a porous fibrillar structure. Interactions of cellulose fibre surfaces with wet-end additives and other materials depend both on the interfacial properties of the cellulose and on the morphology of the surface. It would be useful to be able to separate the interactions with the cellulose from those that depend on surface roughness and porosity by preparing flat cellulose surfaces. Current methods give surfaces of amorphous cellulose or of cellulose II, differing in density and crystallinity from the original cellulose I surface. We propose a new route to prepare smooth model surfaces of cellulose I, starting from colloidal dispersions of cellulose I nanocrystals. The nanometer-sized width of these rod-like colloidal particles allows a relatively flat surface to be prepared from the suspension by casting an aqueous suspension on an appropriate surface and allowing the water to evaporate. Oriented films can be prepared by spin-coating or shearing. The surface composition and morphology of the films were examined by X-ray photoelectron spectroscopy and atomic force microscopy.
Similar content being viewed by others
References
Beamson G. and Briggs D.1992. High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database. John Wiley & Sons, New York.
Dong X.M. and Gray D.G.1997. Effect of counterions on ordered phase formation in suspensions of charged rodlike cellulose crystallites. Langmuir13: 2404–2409.
Dorris G.M. and Gray D.G.1978. The surface analysis of paper and wood fibres by ESCA (Electron Spectroscopy for Chemical Analysis). I. Application to cellulose and lignin. Cellulose Chem. Technol.12: 9–23.
Geffroy C., Labeau M.P., Wong K., Cabane B. and Cohen Stuart M.A.2000. Kinetics of adsorption of poly (vinylamine) onto cellulose. Colloids Surf. A: Physicochem. Eng. Aspects172: 47–56.
Gunnars S., Wågberg L. and Cohen Stuart M.A.2002. Model films of cellulose: 1. Method development and initial results. Cellulose9: 239–249.
Holmberg M., Berg J., Stemme S., ödberg L., Rasmusson J. and Claesson P.1997. Surface force studies of Langmuir–Blodgett cellulose films. J. Coll. Interface Sci.186 (2): 369–381.
Johansson L.-S., Campbell J.M., Koljonen K. and Stenius P.1999. Evaluation of surface lignin on cellulose fibers with XPS. Appl. Surf. Sci.144–145: 92–95.
Luner P. and Sandell M.1969. The wetting of celullose and wood hemicelluloses. J. Polym. Sci. C28: 115–142.
Marchessault R.H. and Sundararajan P.R.1983. Cellulose. In: Aspinall G.O. (ed.), The Polysaccharides. Academic Press, New York, pp. 12–95.
Neuman R.D., Berg J.M. and Claesson P.M.1993. Direct measurement of surface forces in papermaking and paper coating systems. Nord. Pulp Pap. Res. J.8: 96–104.
Preston R.D.1974. The Physical Biology of Plant Cell Walls. Chapman & Hall, London.
Revol J.-F., Bradford H., Giasson J., Marchessault R.H. and Gray D.G.1992. Helicoidal self-ordering of cellulose microfibrils in aqueous suspension. Int. J. Biol. Macromol.14: 170–172.
Revol J.-F., Godbout L. and Gray D.G.1997. Solidified Liquid Crystals of Cellulose with Optically Variable Properties, U.S. Patent 5,629,055, May 13, to Paprican.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Edgar, C.D., Gray, D.G. Smooth model cellulose I surfaces from nanocrystal suspensions. Cellulose 10, 299–306 (2003). https://doi.org/10.1023/A:1027333928715
Issue Date:
DOI: https://doi.org/10.1023/A:1027333928715