Abstract
PLZT 4/65/35 thin films were prepared by the acetic acid based sol-gel route. The choice of lanthanum precursor, i.e., acetate or nitrate, influences the functional group content of formamide modified sols and the microstructure of the thin films. The lanthanum nitrate based PLZT thin film deposited on Si/SiO2/TiO2 /Pt/TiO2 substrate has a columnar perovskite grain structure, while the lanthanum acetate based one is characterized by a lead-silicon containing reaction layer beneath the platinum electrode. Although lead is depleted from the PLZT thin film the perovskite structure is retained by the use of the top layer with a large excess of PbO.
Similar content being viewed by others
References
G. Teowee, E.L. Quackenbush, C.D. Baertlein, J.M. Boulton, E.A. Kneer, and D.R. Uhlmann, in Mat. Res. Soc. Symp. Proc. 361, edited by B.A. Tuttle, S.B. Desu, R. Ramesh, and T. Shiosaki (MRS, Pittsburgh, 1995), p. 433.
G. Yi, Z. Wu, and M. Sayer, J. Appl. Phys. 64, 2717 (1988).
R.A. Assink and R.W. Schwartz, Chem. Mater. 5, 511 (1993).
T. Beltram, M. Kosec, and S. Stavber, Mat. Res. Bull. 28, 313 (1993).
B. Malič, N. Setter, M. Kosec, and K. Brooks, in Proc. MIEL-SD '96, edited by I. Šorli, S. Amon, and M. Kosec (MIDEM, Ljubljana, 1996), p. 385.
D. Chang, Y. Choh, W. Hsieh, P. Lin, and T. Tseng, J. Mater. Sci. 28, 6691 (1993).
B. Malič, M. Kosec, and B. Orel, Silicates Industriels 60, 163 (1995).
G. Dražič, T. Beltram, and M. Kosec, Ferroelectrics 152, 49 (1994).
T. Tani and D.A. Payne, J. Am. Ceram. Soc. 77, 1242 (1994).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Malič, B., Setter, N., Brooks, K. et al. Acetic Acid Based Sol-Gel PLZT Thin Films: Processing and Characterization. Journal of Sol-Gel Science and Technology 13, 833–836 (1998). https://doi.org/10.1023/A:1008646501240
Issue Date:
DOI: https://doi.org/10.1023/A:1008646501240