References
S. K. Das, in “Intermetallic compounds”, Vol. 2, edited by J. H. Westbrook and R. L. Fleischer (John Wiley & Sons, 1995) p. 175.
E. J. Lavernia, J. D. Ayers and T. S. Srivatsan, Int.Mater.Rev. 37 (1992) 1.
L. A. Davis, S. K. Das, J. C. M. Li and M. S. Zedalis, Int.J.Rap.Sol. 8 (1994) 73.
D. J. Skinner, R. L. Bye, D. Raybold and A. M. Brown, Scr.Metall. 20 (1986) 867.
ASM Handbook, Formerly Tenth Edition, Metals Handbook, Properties and Selection: Non Ferrous and Special-Purpose Materials (1995).
S. Hariprasad, S. M. L. Sastry, K. L. Jerina and R. L. Lederich, Metall.Trans. 24A (1993) 865.
A. K. Srivastava and S. Ranganathan, Scr.Metall.Mater. 27 (1992) 1241.
A. K. Srivastava, S. Ranganathan and S. N. Ojha, in Proc. Processing and Fabrication of Advanced Materials for High Temperature Applications-II, edited by V. A. Ravi and T. S. Srivatsan (TMS, Warrendale PA, 1993) p. 253.
A. K. Srivastava, in Proc. Advances in Physical Metallurg, edited by S. Banerjee and V. R. V. Ramanujan (Gordon and Breach Science Publ., Netherlands, 1996) p. 212.
A. K. Srivastava, S. N. Ojha and S. Ranganathan, Metall.Mater.Trans. 29A (1998) 2205.
A. K. Srivastava and S. Ranganathan, J.Mater.Res. (1999), under review.
A. K. Srivastava, R. C. Anandani, A. Dhar and A. K. Gupta, Tenth International Conference on Rapidly Quenched and Metastable Materials, 23-27 August 1999, Bangalore, India.
W. E. Ranz and W. R. MarshaL, Chem.Progr. 48 (1952) 173.
M. C. Flemings, “Solidification processing” (McGraw-Hill, New York, NY, 1974) p. 58.
P. S. Grant, B. Cantorand I. Katgerman, Acta Metall.Mater. 41 (1993) 3097.
L. A. Jacobson and J. M Ckittrick, Mater.Sci.Eng. 11R (1994) 355.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Srivastava, A.K. On cooling rates, interface velocities and particle sizes in spray atomization. Journal of Materials Science Letters 19, 1217–1219 (2000). https://doi.org/10.1023/A:1006748707547
Issue Date:
DOI: https://doi.org/10.1023/A:1006748707547