Hostname: page-component-848d4c4894-pftt2 Total loading time: 0 Render date: 2024-06-07T08:23:25.768Z Has data issue: false hasContentIssue false
  • English
  • Français

Absolute measurements of static-hole error using flush transducers

Published online by Cambridge University Press:  29 March 2006

R.E. Franklin  and
James M. Wallace
R.E. Franklin
Affiliation:
Oxford University Engineering Laboratory
James M. Wallace
Affiliation:
Oxford University Engineering Laboratory
Get access Rights & Permissions [Opens in a new window]

Abstract

Experiments are reported in which the error of a sharp-edged, circular static pressure hole normal to the boundary of a moving fluid is deduced from measurements made with pressure transducers, the diaphragms of which were set flush with the boundary surface. An error curve is presented which covers the range of hole Reynolds number up to a value of 2000.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 42 , Issue 1 , 4 June 1970 , pp. 33 - 48
Copyright
© 1970 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Allen, C. M. & Hooper, L. J. 1932 Piezometer investigation ASME Trans. 54, HYD-54–1.Google Scholar
Bilger, R. W. 1960 The behaviour of Pitot and static holes in fluid flow. D. Phil. Thesis. University of Oxford.
Buchner, K. 1904 Zur Frage der Lavalschoen Turbinendusen. Z. Ver. dt. Ing. 48, 1097.Google Scholar
Darcy, H. P. G. 1857 Recherches Experimentales relatives au Mouvement de l'Eau dans les Tuyaux. Paris: Mallet-Bachelier.
Emmett, W. W. & Wallace, J. R. 1964 Errors in piezometric measurement. Proc. ASCE, J. Hydr. Div. 90, 45.Google Scholar
Franklin, R. E. & Osborn, E. C. 1969 Unpublished.
Furhmann, G. 1912 Theoretische und Experimentelle Untersuchungen an Ballon modellen. Dissertation, University of Göttingen.
Krause, F. 1960 Druckentnahme durch Langschlitze. Ing. Arch. 2.Google Scholar
Lester, W. G. S. 1960 Some problems in fluid flows at low speeds. D. Phil. Thesis, University of Oxford.
Lewis, P. M. 1964 Numerical solutions for shear flow past a two-dimensional rectangular cavity with reference to errors in the measurement of static pressure. B.Sc. Thesis, University of Oxford.
Livesey, J. L., Jackson, J. D. & Southern, C. J. 1962 The static-hole error problem: An experimental investigation of errors for holes of varying diameters and depths. Aircr. Engng. 34, 43.CrossRefGoogle Scholar
Mills, H. F. 1879 Experiments upon piezometers used in hydraulic investigations. Proc. Am. Acad. Arts Sci. (New Series) 6, 26.Google Scholar
Myadzu, A. 1936 Influence of type and dimensions of pressure holes on the recorded static pressure. Tech. Rep., Tohoku Imperial University 12, 2. (English trans. Aero. Res. Counc. 2904.)Google Scholar
Morrison, D. F., Sheppard, L. M. & Williams, M. J. 1967 Hole size effect on hemisphere pressure distributions. J. Roy. Aero. Soc. 71, 317.Google Scholar
Preston, J. H. 1954 The determination of turbulent skin friction by means of Pitot tubes. J. Roy. Aero. Soc. 58, 109.Google Scholar
Rainbird, W. J. 1967 Errors in measurement of mean static pressure of a moving fluid due to pressure holes. Quart. Bull., Div. Mech. Engng, Nat. Aero. Est., Nat. Res. Counc. Canada, Rep. DME/NAE 1967 (3).Google Scholar
Ray, A. K. 1956 On the effect of orifice size on static pressure reading at different Reynolds numbers. Ing. Arch. 24, 3. (English trans. Aero. Res. Counc., 18, 829.)Google Scholar
Rayle, R. E. 1959 Influence of orifice geometry on static pressure measurements. S.M. Thesis, M.I.T.
Shaw, R. 1960 The influence of hole dimensions on static pressure measurements. J. Fluid Mech. 7, 550.Google Scholar
Schuster, P. 1910 Experimentelle Untersuchen der strömungsvorgange in einer Schnellaufer — Francis — Turbine, unter Anwendung eines neuer verfahrens zur Bestimmung von Stromrichfungen mit Pitot — Rohren. Mitt. Forsch. V.D.I. no. 82.Google Scholar
Smith, D. W. & Walker, J. H. 1958 Skin-friction measurements in incompressible flow. N.A.C.A. T.N. 4231.Google Scholar
Stratford, B. S., Ascough, J. C. 1962 A recent attempt at accurate airflow measurement by Pitot-static traverse. Flow measurement in closed conduits. Edinburgh: HMSO.
Thom, A. & Apelt, C. J. 1957 The pressure in a two-dimensional static hole at low Reynolds numbers. Aero. Res. Counc. R & M 3090.Google Scholar
Thwaites, B. 1960 Outlines of a proposal for experiments on static pressure. Aero. Res. Counc. 22,034.Google Scholar