Abstract
Morphing capability is absolutely vital for aerospace vehicle to gain predominant functions of aerodynamics, mobility and flight control while piercing and re-entering the atmosphere. However, the challenge for existing aerospace vehicle remains to change its structure of nose cone agilely. This paper carries out a lot of observational experiments on honeybee’s abdomen which enhances the flight characteristics of honeybee by adjusting its biomorphic shape. A morphing structure is adopted from hon-eybee’s abdomen to improve both the axial scalability and bending properties of aerospace vehicle, which can lead to the super-maneuver flight performance. Combined with the methods of optimum design and topology, a new bionic morphing structure is proposed and applied to the design of morphing nose cone of aerospace vehicle. Furthermore, simulations are conducted to optimize the structural parameters of morphing nose cone. This concept design of biomimetic nose cone will provide an efficient way for aerospace vehicle to reduce the aerodynamic drag.
Similar content being viewed by others
References
Nino J, Mitrache F, Cosyn P, De Keyser R. Model identifi-cation of a micro air vehicle. Journal of Bionic Engineering, 2007, 4, 227–236.
Li J, Wu J, Yan S. Conceptual design of deployment structure of morphing nose cone. Advances in Mechanical Engineering, 2013, 5, 590957.
Liu G, Li D, Xiang J, Luo W. Design, modeling and analysis of a sharp-edge hypersonic stealthy re-entry vehicle. Pro-cedia Engineering, 2015, 99, 163–167.
Serres J R, Ruffier F. Biomimetic autopilot based on minimalistic motion vision for navigating along corridors com-prising U-shaped and S-shaped turns. Journal of Bionic Engineering, 2015, 12, 47–60.
Dietl J, Herrmann T, Reich G, Garcia E. Dynamic modeling, testing, and stability analysis of an ornithoptic blimp. Journal of Bionic Engineering, 2011, 8, 375–386.
Barbarino S, Flores E I S, Ajaj R M, Dayyani I, Friswell M I. A review on shape memory alloys with applications to morphing aircraft. Smart Materials and Structures, 2014, 23, 063001.
Weisshaar T A. Morphing aircraft systems: Historical per-spectives and future challenges. Journal of Aircraft, 2013, 50, 337–353.
Obradovic B, Subbarao K. Modeling of flight dynamics of morphing wing aircraft. Journal of Aircraft, 2011, 48, 391–402.
Mardanpour P, Hodges D H. Passive morphing of flying wing aircraft: Z-shaped configuration. Journal of Fluids and Structures, 2014, 44, 17–30.
Wu R, Sun J, Chang Z Z, Bai R, Leng J S. Elastic composite skin for a pure shear morphing wing structures. Journal of Intelligent Material Systems and Structures, 2015, 26, 352–363.
Smith D D, Lowenberg M H, Jones D P, Friswell M I. Computational and experimental validation of the active morphing wing. Journal of Aircraft, 2014, 51, 925–937.
Kang W R, Kim E H, Jeong M S, Lee I, Ahn S M. Morphing wing mechanism using an SMA wire actuator. International Journal of Aeronautical and Space Sciences, 2012, 13, 58–63.
Muhammad A, Nguyen Q V, Park H C, Hwang D Y, Byun D, Goo N S. Improvement of artificial foldable wing models by mimicking the unfolding/folding mechanism of a beetle hind wing. Journal of Bionic Engineering, 2010, 7, 134–141.
Galantai V P, Sofla A Y N, Meguid S A, Tan K T, Yeo W K. Bio-inspired wing morphing for unmanned aerial vehicles using intelligent materials. International Journal of Me-chanics and Materials in Design, 2012, 8, 71–79.
Moosavian A, Xi F, Hashemi S M. Design and motion con-trol of fully variable morphing wings. Journal of Aircraft, 2013, 50, 1189–1201.
Ellington C P. The novel aerodynamics of insect flight: Applications to micro-air vehicles. Journal of Experimental Biology, 1999, 202, 3439–3448.
Weisshaar T A. Morphing Aircraft Technology-New Shapes for Aircraft Design, Purdue University, Indiana, USA, 2006.
Perry, III B, Cole S R, Miller G D. Summary of an active flexible wing program. Journal of Aircraft, 1995, 32, 10–15.
Kudva J, Appa K, Martin C A, Jardine A P, Sendeckyj G, Harris T, McGowan A, Lake R. Design, fabrication, and testing of the DARPA/Wright Lab ‘smart wing’ wind tunnel model. Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, Florida, USA, 1997.
Wrobleshi M S, Henderson J. BAC1–11 and MAW F-111 control surface weight estimation for SWIFT study. Proceedings of the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, Texas, USA, 2005.
Murugan S, Friswell M I. Morphing wing flexible skins with curvilinear fiber composites. Composite Structures, 2013, 99, 69–75.
Wu J, Yan S, Li J, Gu Y. Mechanism reliability of bistable compliant mechanisms considering degradation and uncertainties: Modeling and evaluation method. Applied Mathematical Modelling, 2016, 40, 10377–10388.
Wu J, Yan S, Gu Y. On stability optimization of the de-ployable bistable compliant structures mounted in the morphing skin: Method and implementation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2015, 229, 943–956.
Wu J, Li J, Yan S. Design of deployable bistable structures for morphing skin and its structural optimization. Engineering Optimization, 2014, 46, 745–762.
Mathew R, Murali N, Mattam J J. Design studies of conical shells in launch vehicles. International Journal of Innovative Research in Advanced Engineering, 2015, 2, 66–72.
Zhao L, Wang J, Ma J, Lin J, Peng J, Qu D, Chen L. An experimental investigation on transpiration cooling under supersonic condition using a nose cone model. International Journal of Thermal Sciences, 2014, 84, 207–213.
Gerdroodbary M B, Imani M, Ganji D D. Heat reduction using conterflowing jet for a nose cone with aerodisk in hypersonic flow. Aerospace Science and Technology, 2014, 39, 652–665.
Deepak N R, Ray T, Boyce R R. Evolutionary algorithm shape optimization of a hypersonic flight experiment nose cone. Journal of Spacecraft and Rockets, 2008, 45, 428–437.
Stengel R F. Morphing aerospace vehicles and structures. Journal of Guidance, Control, and Dynamics, 2013, 36, 1562–1563.
Stead N. The abdomen: The secret to stabilising flight. Journal of Experimental Biology, 2013, 216, i–ii.
Valasek J. Morphing Aerospace Vehicles and Structures (Aerospace Series), John Wiley & Sons, New York, USA, 2012.
Truong Q T, Argyoganendro B W, Park H C. Design and demonstration of insect mimicking foldable artificial wing using four-bar linkage systems. Journal of Bionic Engi-neering, 2014, 11, 449–458.
Stowers A K, Lentink D. Folding in and out: Passive morphing in flapping wings. Bioinspiration & Biomimetics, 2015, 10, 025001.
Huang J, Siao S. Development of an integrated bionic design system. Journal of Engineering, Design and Technology, 2016, 14, 310–327.
Zhao J, Yan S, Wu J. Critical structure for telescopic movement of honeybee abdomen: Folded intersegmental membrane. Journal of Insect Science, 2016, 16, 79.
Zhao J, Wu J, Yan S. Movement analysis of flexion and extension of honeybee abdomen based on an adaptive segmented structure. Journal of Insect Science, 2015, 15, 109.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhao, J., Yan, S., Deng, L. et al. Design and analysis of biomimetic nose cone for morphing of aerospace vehicle. J Bionic Eng 14, 317–326 (2017). https://doi.org/10.1016/S1672-6529(16)60400-6
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1672-6529(16)60400-6