Ruthenium doped TiO2 fibers by electrospinning
Section snippets
Acknowledgments
This work was supported by the Grant of Post-Doc. Program, Chonbuk National University (2002).
References (21)
- et al.
Membr. Sci.
(1988) - et al.
Surf. Technol.
(1979) - et al.
J. Non-Cryst. Sol.
(1990) - et al.
Mater. Lett.
(1997) - et al.
J. Electrostat.
(1995) - et al.
Polymer
(2003) - et al.
Chem. Phys. Lett.
(2003) - et al.
J. Solid State Chem.
(1988) - et al.
Chem. Rev.
(1995) - M. Taramasso, G. Perego, B. Notari, US Patent 4, 410 (1983)...
Cited by (73)
Ion beam irradiation: Novel approach for preparation of Ag coated N doped nanocrystalline anatase TiO<inf>2</inf> films
2023, Materials Science and Engineering: BCitation Excerpt :Due to this, a significant amount of research on TiO2 has been carried out over the last few decades for its potential applications ranging from energy to environmental aspects [3 –5]. The semiconducting TiO2 is proved to be a very useful oxide in many fields like antibacterial applications [6,7], sensors [8,9], photocatalysis for environmental purification, and production of hydrogen from water [10 –13], removal of unwanted impurities from water and air [14,15], solar cells [16,17], ceramic membrane and also as a catalyst for photocatalytic decomposition [18 –21]. Different nanostructures like nanofibres [19,21] nanowires [22 –24], nanotubes [25,26], nanorods [27,28], nanospheres [29], nanoplumes [30] are synthesized for improving the properties of the TiO2.
A review of hierarchical nanostructures of TiO<inf>2</inf>: Advances and applications
2021, Applied Surface Science AdvancesA novel and chemical stable Co-B nanoflakes-like structure supported over titanium dioxide nanofibers used as catalyst for hydrogen generation from ammonia borane complex
2016, International Journal of Hydrogen EnergyFabrication and characterization of an immobilized titanium dioxide (TiO<inf>2</inf>) nanofiber photocatalyst
2016, Materials Today: ProceedingsReduction of the impact of atmospheric ageing effects on spin coated γ-CuCl nanocrystalline hybrid films
2016, Optical MaterialsCitation Excerpt :One challenge linked with the use of CuCl is that it is sensitive to moist air, i.e. CuCl is not stable in ambient conditions as it forms oxyhalides of Cu(II) within a few hours of exposure to air. In hybrid materials, it is possible to combine organics and inorganics in a nano-composite [20–28]. Previously, CuCl thin films with usable lifetimes (optical and electronic properties) of up to 28 days were fabricated using an extra layer of polysilsesquioxane (PSSQ) and cyclo olefin copolymer (COC) on the top of CuCl active layer [29].
Formation and characterization of ribbon-like RuO<inf>2</inf>/Ru fibers
2015, Materials Letters