A novel technique for the direct fabrication of fixed interim restorations
Section snippets
Fabricating the matrix
- 1.
If the current shape of the teeth to be prepared is acceptable, make an impression including at least 1 adjacent tooth on each side and fabricate a cast with a Type IV dental stone (Resin Rock; Whip Mix, Louisville, Ky). In this situation, base the fabrication of the interim restoration on the existing partial fixed dental prosthesis in the maxillary left posterior region (Fig. 1). Alternatively, if new information must be transferred from the diagnostic waxing, moisten the diagnostic cast and
Discussion
This article describes a direct technique for fabricating interim restorations. The transparency of the matrix used enables better control of the restoration fabrication process and allows for the use of various interim materials.
The temperature rise caused by some restorative materials such as poly(methyl methacrylate) can be countered by using a matrix that absorbs the increased temperature. The thickness of the presented matrix increases its heat capacity compared to a vacuum-formed
Summary
A new technique for the fabrication of interim restorations with a translucent matrix is described. A thermoplastic, vacuum-formed template and a translucent vinyl polysiloxane material are combined in this technique, which allows the use of a wide variety of interim materials, including light-polymerized resins. The technique leads to the fabrication of accurate, durable, and esthetic interim restorations.
References (16)
Accurate acrylic resin temporary restorations
J Prosthet Dent
(1978)Composite indirect-direct method for fabricating multiple-unit provisional restorations
J Prosthet Dent
(2003)- et al.
The marginal accuracy of treatment restorations: A comparative analysis
J Prosthet Dent
(1980) Composite veneered acrylic resin provisional restorations for complete veneer crowns
J Prosthet Dent
(1999)Indirectly formed matrix for multiple composite core restorations: two clinical treatments illustrating an expanded technique
J Prosthet Dent
(2002)- et al.
Improved occlusal surface detail with the vacuum-formed matrix
J Prosthet Dent
(1994) - et al.
Effects of occlusal loading and thermocycling on the marginal gaps of light-polymerized and autopolymerized resin provisional crowns
J Prosthet Dent
(1999) Fabricating light-cured provisional restorations
J Am Dent Assoc
(1997)
Cited by (2)
Marginal adaptation of provisional crowns made of acrylic and bisacrylic resins using different impression materials
2019, Brazilian Journal of Oral Sciences