The role of surface instability in electrical discharges from drops of alcohol and water in air at atmospheric pressure
References (16)
Phi. Mag.
(1882)Phys. Rev.
(1914)Phys. Rev.
(1914)Phys. Rev.
(1920)- et al.
Cited by (30)
The impact of relative humidity on electrospun polymer fibers: From structural changes to fiber morphology
2020, Advances in Colloid and Interface ScienceA comprehensive review summarizing the effect of electrospinning parameters and potential applications of nanofibers in biomedical and biotechnology
2018, Arabian Journal of ChemistryCitation Excerpt :Increasing the flow rate beyond a critical value not only leads to increase in the pore size and fiber diameter but also to bead formation (due to incomplete drying of the nanofiber jet during the flight between the needle tip and metallic collector) (Megelski et al., 2002). Because increases and decreases in the flow rate affect the nanofiber formation and diameter, a minimum flow rate is preferred to maintain a balance between the leaving polymeric solution and replacement of that solution with a new one during jet formation (Megelski et al., 2002; Zeleny, 1935). This will also allow the formation of a stable jet cone and sometimes a receded jet (a jet that emerges directly from the inside of the needle with no apparent droplet or cone).
Electrosprays in the cone-jet mode: From Taylor cone formation to spray development
2018, Journal of Aerosol ScienceCitation Excerpt :In parallel to this body of applied research, other efforts have been aimed at improving the understanding of the underlying physics of electrosprays. Since the studies conducted by John Zeleny at Yale University early in the 20th century (Zeleny, 1907, 1914, 1915, 1917, 1920, 1935), the fundamental studies on electrosprays were interrupted during WWII, and later restarted with key contributions, e.g. the famous G. I. Taylor’s analysis of the electro-hydro-static equilibrium of conical menisci (Taylor, 1964, 1969). During the Space Age (60’s and 70’s) the field underwent a rebirth with the search for new spacecraft propulsion methods (as reviewed by López Urdiales, 2004).
Modeling and simulation of the electrospinning process
2017, Electrospun NanofibersEquilibrium shapes and stability of nonconducting pendant drops surrounded by a conducting fluid in an electric field
1995, Journal of Colloid And Interface ScienceResponse to remarks by Fernàndez de la Mora and Gomez on our paper "Generation of micron-sized droplets from the Taylor cone"
1993, Journal of Aerosol Science