Abstract
Since ancient times, humans have used wood as a building material due to its unique properties including porosity, anisotropy, biodegradability, and easy processing. Wood-based composites have been extensively studied in order to meet the performance requirements of the wood during use. However, the environmental burdens are steadily increasing due to the pollution in the synthesis of wood-based composites. At present, it has become a mainstream development trend to use environmentally friendly materials as raw materials and use adhesive-free bonding technology to prepare wood-based composites. Based on this green production, various environmentally friendly functional additives are widely mixed into raw materials to endow advanced wood-based composites with new practical functions such as electromagnetic shielding, antibacterial, and flame retardant. Hence, this paper summarizes the types of traditional wood-based composites and the pollution problems that exist in the preparation and application process, focusing on the green preparation technology and performance advantages of advanced wood-based composites. Among them, the adhesive-free hot-pressed technology is the most environmentally friendly method in the green preparation technology. Meanwhile, this paper looks forward to the development direction of advanced wood-based composites with new functions processed by green preparation technology. Furthermore, it will be upgraded towards the research of multi-functional integrated advanced wood-based composites in the future.
Graphical abstract
Similar content being viewed by others
Data availability
The data presented in this study are available on request from the corresponding author.
References
Dong X, Gan W, Shang Y, Tang J, Wang Y, Cao Z et al (2022) Low-value wood for sustainable high-performance structural materials. Nat Sustain 5(7):628–635
Ramage MH, Burridge HC, Busse-Wicher M, Fereday G, Reynolds T, Shah DU et al (2017) The wood from the trees: the use of timber in construction. Renew Sustain Energy Rev 68:333–359
Sandberg D, Kutnar A, Mantanis G (2017) Wood modification technologies — a review. Iforest-Biogeosci For 10:895–908
Timbolmas C, Bravo R, Rescalvo FJ, Gallego A (2022) Development of an analytical model to predict the bending behavior of composite glulam beams in tension and compression. J Buil Eng 45
Sun X, He M, Li Z (2020) Novel engineered wood and bamboo composites for structural applications: state-of-art of manufacturing technology and mechanical performance evaluation. Constr Build Mater 249
Zhu H, Luo W, Ciesielski PN, Fang Z, Zhu JY, Henriksson G et al (2016) Wood-derived materials for green electronics, biological devices, and energy applications. Chem Rev 116(16):9305–9374
Zhu M, Song J, Li T, Gong A, Wang Y, Dai J et al (2016) Highly anisotropic, highly transparent wood composites. Adv Mater 28(26):5181
Gerardin P (2016) New alternatives for wood preservation based on thermal and chemical modification of wood- a review. Ann For Sci 73(3):559–570
Tu K, Puertolas B, Adobes-Vidal M, Wang Y, Sun J, Traber J et al (2020) Green synthesis of hierarchical metal-organic framework/wood functional composites with superior mechanical properties. Adv Sci 7(7)
Bergstrom L (2018) Wood-inspired engineering materials. Sci China Mater 61(12):1625–1626
Rousset P, Lapierre C, Pollet B, Quirino W, Perre P (2009) Effect of severe thermal treatment on spruce and beech wood lignins. Ann For Sci 66(1)
Jiang D, Wang Y, Li B, Sun C, Guo Z (2020) Environmentally friendly alternative to polyester polyol by corn straw on preparation of rigid polyurethane composite. Compos Commun 17:109–114
Khansary MA, Pouresmaeel-Selakjani P, Aroon MA, Hallajisani A, Cookman J, Shirazian S (2020) A molecular scale analysis of TEMPO-oxidation of native cellulose molecules. Heliyon 6(12)
Li Y, Fu Q, Yu S, Yan M, Berglund L (2016) Optically transparent wood from a nanoporous cellulosic template: combining functional and structural performance. Biomacromol 17(4):1358–1364
Cermak P, Baar J, Domeny J, Vybohova E, Rousek R, Paril P et al (2022) Wood-water interactions of thermally modified, acetylated and melamine formaldehyde resin impregnated beech wood. Holzforschung 76(5):437–450
Isogai A (2013) Wood nanocelluloses: fundamentals and applications as new bio-based nanomaterials. J Wood Sci 59(6):449–459
Shui T, Khatri V, Chae M, Sokhansanj S, Choi P, Bressler DC (2020) Development of a torrefied wood pellet binder from the cross-linking between specified risk materials-derived peptides and epoxidized poly (vinyl alcohol). Renew Energy 162:71–80
Kordjazi S, Kamyab K, Hemmatinejad N (2020) Super-hydrophilic/oleophobic chitosan/acrylamide hydrogel: an efficient water/oil separation filter. Adv Compos Hybrid Mater 3(2):167–176
Bengtsson M, Stark NM, Oksman K (2007) Durability and mechanical properties of silane cross-linked wood thermoplastic composites. Compos Sci Technol 67(13):2728–2738
Huang E, Cao Y, Duan X, Yan Y, Wang Z, Jin C (2021) Cross-linked chitosan as an eco-friendly binder for high-performance wood-based fiberboard. Int J Polym Sci 2021
Zhu M, Yan X, Xu H, Xu Y, Kong L (2021) Ultralight, compressible, and anisotropic MXene@Wood nanocomposite aerogel with excellent electromagnetic wave shielding and absorbing properties at different directions. Carbon 182:806–814
Madyaratri EW, Ridho MR, Aristri MA, Lubis MAR, Iswanto AH, Nawawi DS et al (2022) Recent advances in the development of fire-resistant biocomposites—a review. Polymers 14(3)
Ma X, Zhao S, Tian Z, Duan G, Pan H, Yue Y et al (2022) MOFs meet wood: reusable magnetic hydrophilic composites toward efficient water treatment with super-high dye adsorption capacity at high dye concentration. Chem Eng J 446
Xiong C, Wang T, Zhang Y, Zhu M, Ni Y (2022) Recent progress on green electromagnetic shielding materials based on macro wood and micro cellulose components from natural agricultural and forestry resources. Nano Res 15(8):7506–7532
Vinod A, Gowda TGY, Vijay R, Sanjay MR, Gupta MK, Jamil M et al (2021) Novel Muntingia Calabura bark fiber reinforced green-epoxy composite: a sustainable and green material for cleaner production. J Clean Prod 294
Ge S, Ma NL, Jiang S, Ok YS, Lam SS, Li C et al (2020) Processed bamboo as a novel formaldehyde-free high-performance furniture biocomposite. ACS Appl Mater Interfaces 12(27):30824–30832
Ye H, Wang Y, Yu Q, Ge S, Fan W, Zhang M et al (2021) Bio-based composites fabricated from wood fibers through self-bonding technology. Chemosphere 287(Pt 4):132436
Xia Q, Chen C, Yao Y, Li J, He S, Zhou Y et al (2021) A strong, biodegradable and recyclable lignocellulosic bioplastic. Nat Sustain 4(7):627
Liang C, Qiu H, Song P, Shi X, Kong J, Gu J (2020) Ultra-light MXene aerogel/wood-derived porous carbon composites with wall-like “mortar/brick” structures for electromagnetic interference shielding. Sci Bull 65(8):616–622
Lian M, Huang Y, Liu Y, Jiang D, Wu Z, Li B et al (2022) An overview of regenerable wood-based composites: preparation and applications for flame retardancy, enhanced mechanical properties, biomimicry, and transparency energy saving. Adv Compos Hybrid Mater 5(3):1612–1657
Zhang C, Mo J, Fu Q, Liu Y, Wang S, Nie S (2021) Wood-cellulose-fiber-based functional materials for triboelectric nanogenerators. Nano Energy 81:105637
Zhang F, Lian M, Alhadhrami A, Huang M, Li B, Mersal GAM et al (2022) Laccase immobilized on functionalized cellulose nanofiber/alginate composite hydrogel for efficient bisphenol A degradation from polluted water. Adv Compos Hybrid Mater 5(3):1852–1864
Ye M, Wang S, Ji X, Tian Z, Dai L, Si C (2023) Nanofibrillated cellulose-based superhydrophobic coating with antimicrobial performance. Adv Compos Hybrid Mater 6(1)
Zhang D, Zhang M, Wang J, Sun H, Liu H, Mi L et al (2022) Impedance response behavior and mechanism study of axon-like ionic conductive cellulose-based hydrogel strain sensor. Adv Compos Hybrid Mater 5(3):1812–1820
Zhu K, Wang X, Chen D, Ren W, Lin H, Zhang H (2019) Wood-based biochar as an excellent activator of peroxydisulfate for Acid Orange 7 decolorization. Chemosphere 231:32–40
Chua YW, Wu H, Yu Y (2021) Effect of cellulose-lignin interactions on char structural changes during fast pyrolysis at 100–350 degrees C. Proc Combust Inst 38(3):3977–3986
Hou C, Yang W, Kimura H, Xie X, Zhang X, Sun X et al (2023) Boosted lithium storage performance by local build-in electric field derived by oxygen vacancies in 3D holey N-doped carbon structure decorated with molybdenum dioxide. J Mater Sci Technol 142:185–195
Li ZH, Chen CJ, Xie H, Yao Y, Zhang X, Brozena A et al (2022) Sustainable high-strength macrofibres extracted from natural bamboo. Nat Sustain 5(3):235
Mu Q, Liu R, Kimura H, Li J, Jiang H, Zhang X et al (2023) Supramolecular self-assembly synthesis of hemoglobin-like amorphous CoP@N, P-doped carbon composites enable ultralong stable cycling under high-current density for lithium-ion battery anodes. Adv Compos Hybrid Mater 6(1)
Muthuraj R, Lacoste C, Lacroix P, Bergeret A (2019) Sustainable thermal insulation biocomposites from rice husk, wheat husk, wood fibers and textile waste fibers: Elaboration and performances evaluation. Ind Crops Prod 135:238–245
Pizzi A, Papadopoulos AN, Policardi F (2020) Wood composites and their polymer binders. Polymers 12(5)
Ge S, Shi Y, Xia C, Huang Z, Manzo M, Cai L et al (2021) Progress in pyrolysis conversion of waste into value-added liquid pyro-oil, with focus on heating source and machine learning analysis. Energy Convers Manag 245
Jiang B, Chen C, Liang Z, He S, Kuang Y, Song J et al (2020) Lignin as a wood-inspired binder enabled strong, water stable, and biodegradable paper for plastic replacement. Adv Funct Mater 30(4)
Mohanty AK, Vivekanandhan S, Pin J-M, Misra M (2018) Composites from renewable and sustainable resources: challenges and innovations. Science 362(6414):536–542
Najafi SK (2013) Use of recycled plastics in wood plastic composites — a review. Waste Manag 33(9):1898–1905
Yang W, Peng D, Kimura H, Zhang X, Sun X, Pashameah RA et al (2022) Honeycomb-like nitrogen-doped porous carbon decorated with Co3O4 nanoparticles for superior electrochemical performance pseudo-capacitive lithium storage and supercapacitors. Adv Compos Hybrid Mater 5(4):3146–3157
Li F, Li Q, Kimura H, Xie X, Zhang X, Wu N et al (2023) Morphology controllable urchin-shaped bimetallic nickel-cobalt oxide/carbon composites with enhanced electromagnetic wave absorption performance. J Mater Sci Technol 148:250–259
Ma Y, Hou C, Kimura H, Xie X, Jiang H, Sun X et al (2023) Recent advances in the application of carbon-based electrode materials for high-performance zinc ion capacitors: a mini review. Adv Compos Hybrid Mater 6(2)
Ma Y, Xie X, Yang W, Yu Z, Sun X, Zhang Y et al (2021) Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors. Adv Compos Hybrid Mater 4(4):906–924
Zhou H, Xiao Z, Wang Y, Hao X, Xie Y, Song Y et al (2020) Conductive and fire-retardant wood/polyethylene composites based on a continuous honeycomb-like nanoscale carbon black network. Constr Build Mater 233
Knauf M (2017) Market potentials for timber-concrete composites in Germany’s building construction sector. Eur J Wood Wood Prod 75(4):639–649
Song J, Chen C, Zhu S, Zhu M, Dai J, Ray U et al (2018) Processing bulk natural wood into a high-performance structural material. Nature 554(7691):224
Liu H, Chen C, Wen H, Guo R, Williams NA, Wang B et al (2018) Narrow bandgap semiconductor decorated wood membrane for high-efficiency solar-assisted water purification. J Mater Chem A 6(39):18839–18846
Jedrzejczak P, Collins MN, Jesionowski T, Klapiszewski L (2021) The role of lignin and lignin-based materials in sustainable construction—a comprehensive review. Int J Biol Macromol 187:624–650
Dang C, Mu Q, Xie X, Sun X, Yang X, Zhang Y et al (2022) Recent progress in cathode catalyst for nonaqueous lithium oxygen batteries: a review. Adv Compos Hybrid Mater 5(2):606–626
Kumar C, Leggate W (2022) An overview of bio-adhesives for engineered wood products. Int J Adhes Adhes 118
Li F, Bi Z, Kimura H, Li H, Liu L, Xie X et al (2023) Energy- and cost-efficient salt-assisted synthesis of nitrogen-doped porous carbon matrix decorated with nickel nanoparticles for superior electromagnetic wave absorption. Adv Compos Hybrid Mater 6(4)
Hetzer M, De Kee D (2008) Wood/polymer/nanoclay composites, environmentally friendly sustainable technology: a review. Chem Eng Res Des 86(10A):1083–1093
Kai D, Tan MJ, Chee PL, Chua YK, Yap YL, Loh XJ (2016) Towards lignin-based functional materials in a sustainable world. Green Chem 18(5):1175–1200
Ramamoorthy SK, Skrifvars M, Persson A (2015) A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers. Polym Rev 55(1):107–162
Song JW, Chen CJ, Zhu SZ, Zhu MW, Dai JQ, Ray U et al (2018) Processing bulk natural wood into a high-performance structural material. Nature 554(7691):224
Hemmila V, Adamopoulos S, Karlsson O, Kumar A (2017) Development of sustainable bio-adhesives for engineered wood panels - A Review. RSC Adv 7(61):38604–38630
Nkeuwa WN, Zhang J, Semple KE, Chen M, Xia Y, Dai C (2022) Bamboo-based composites: a review on fundamentals and processes of bamboo bonding. Compos Part B-Eng 235
Baroncini EA, Yadav SK, Palmese GR, Stanzione JF III (2016) Recent advances in bio-based epoxy resins and bio-based epoxy curing agents. J Appl Polym Sci 133(45)
Zelinka SL, Altgen M, Emmerich L, Guigo N, Keplinger T, Kymalainen M et al (2022) Review of wood modification and wood functionalization technologies. Forests 13(7)
Su M, Wu J, Pan P, Wang H (2022) Preparation and characterization of a water-resistant polyamide-oxidized starch-methyl methacrylate eco-friendly wood adhesive. Int J Biol Macromol 194:763–769
He G, Feng M, Dai C (2012) Development of soy-based adhesives for the manufacture of wood composite products. Holzforschung 66(7):857–862
Cheng HN, Dowd MK, He Z (2013) Investigation of modified cottonseed protein adhesives for wood composites. Ind Crops Prod 46:399–403
Podlena M, Bohm M, Saloni D, Velarde G, Salas C (2021) Tuning the adhesive properties of soy protein wood adhesives with different coadjutant polymers, nanocellulose and lignin. Polymers 13(12)
Takahashi N, Yoshida T, Kojima S, Yamaguchi S, Ohtsuka R, Takeda M et al (2018) Pathological and clinical pathological changes induced by four-week, repeated-dose, oral administration of the wood preservative chromated copper arsenate in Wistar rats. Toxicol Pathol 46(3):312–323
Faria DL, Cruz TM, Dias MC, Mendes LM, Guimaraes Junior JB (2020) Physical and mechanical behavior of glulam beams produced with rubberwood treated with preservatives. Ciencia E Agrotecnologia 44
Zhang M, Wang D, Li T, Jiang J, Bai H, Wang S et al (2023) Multifunctional flame-retardant, thermal insulation, and antimicrobial wood-based composites. Biomacromolecules
Amobonye A, Bhagwat P, Singh S, Pillai S (2021) Plastic biodegradation: frontline microbes and their enzymes. Sci Total Environ 759
Saloni D, Buehlmann U, Lemaster RL (2011) Tool wear when cutting wood fiber-plastic composite materials. For Prod J 61(2):149–154
Zhu Z, Buck D, Wang J, Wu Z, Xu W, Guo X (2022) Machinability of different wood-plastic composites during peripheral milling. Materials 15(4)
Liu J, Zhang L, Cheng B, Fan J, Yu J (2021) A high-response formaldehyde sensor based on fibrous Ag-ZnO/In2O3 with multi-level heterojunctions. J Hazard Mater 413
Huang Y, Ho SSH, Lu Y, Niu R, Xu L, Cao J et al (2016) Removal of indoor volatile organic compounds via photocatalytic oxidation: a short review and prospect. Molecules 21(1)
Salthammer T (2019) Formaldehyde sources, formaldehyde concentrations and air exchange rates in European housings. Build Environ 150:219–232
Li Y, Chen N, Deng D, Xing X, Xiao X, Wang Y (2017) Formaldehyde detection: SnO2 microspheres for formaldehyde gas sensor with high sensitivity, fast response/recovery and good selectivity. Sens Actuators B Chem 238:264–273
Lou C, Yang C, Zheng W, Liu X, Zhang J (2021) Atomic layer deposition of ZnO on SnO2 nanospheres for enhanced formaldehyde detection. Sens Actuators B Chem 329
Zhang J, Song F, Tao J, Zhang Z, Shi SQ (2018) Research progress on formaldehyde emission of wood-based panel. Int J Polym Sci 2018
Feng L, Xie W (2021) Analysis of factors affecting creep of wood-plastic composites. Forests 12(9)
Salca E-A, Hiziroglu S (2019) Hardness and roughness of overlaid wood composites exposed to a high-humidity environment. Coatings 9(11)
Liu XY, Lv MQ, Liu M, Lv JF (2019) Repeated humidity cycling’s effect on physical properties of three kinds of wood-based panels. BioResources 14(4):9444–9453
Yang H, Chao W, Di X, Yang Z, Yang T, Yu Q et al (2019) Multifunctional wood based composite phase change materials for magnetic-thermal and solar-thermal energy conversion and storage. Energy Convers Manag 200
Zhou M, Gu W, Wang G, Zheng J, Pei C, Fan F et al (2020) Sustainable wood-based composites for microwave absorption and electromagnetic interference shielding. J Mater Chem A 8(46):24267–24283
Ma X, Pan J, Guo H, Wang J, Zhang C, Han J et al (2023) Ultrathin wood-derived conductive carbon composite film for electromagnetic shielding and electric heating management. Adv Funct Mater 33(16)
Mahmud S, Hasan KMF, Jahid MA, Mohiuddin K, Zhang R, Zhu J (2021) Comprehensive review on plant fiber-reinforced polymeric biocomposites. J Mater Sci 56(12):7231–7264
Wicklein B, Kocjan A, Salazar-Alvarez G, Carosio F, Camino G, Antonietti M et al (2015) Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide. Nat Nanotechnol 10(3):277–283
Huang S, Wang L, Li Y, Liang C, Zhang J (2021) Novel Ti3C2Tx MXene/epoxy intumescent fire-retardant coatings for ancient wooden architectures. J Appl Polym Sci 138(27)
Chu T, Gao Y, Yi L, Fan C, Yan L, Ding C et al (2022) Highly fire-retardant optical wood enabled by transparent fireproof coatings. Adv Compos Hybrid Mater 5(3):1821–1829
Fang L, Chang L, Guo W-j, Ren Y-p, Wang Z (2013) Preparation and characterization of wood-plastic plywood bonded with high density polyethylene film. Eur J Wood Wood Prod 71(6):739–46
Mateo R, Cabrero JC, Hermoso E, Chillon JM (2011) Ageing tests study on wood-based sandwich panels. Mater Construcc 61(304):583–596
Shuai L, Amiri MT, Questell-Santiago YM, Heroguel F, Li Y, Kim H et al (2016) Formaldehyde stabilization facilitates lignin monomer production during biomass depolymerization. Science 354(6310):329–333
Dominguez-Robles J, Tarres Q, Alcala M, El Mansouri N-E, Rodriguez A, Mutje P et al (2020) Development of high-performance binderless fiberboards from wheat straw residue. Constr Build Mater 232
Ye H, Wang Y, Yu Q, Ge S, Fan W, Zhang M et al (2022) Bio-based composites fabricated from wood fibers through self-bonding technology. Chemosphere 287
Thuraisingam J, Mishra P, Gupta A, Soubam T, Piah BM (2019) Novel natural rubber latex/lignin-based bio-adhesive: synthesis and its application on medium density fiber-board. Iran Polym J 28(4):283–290
Maddodi BS, Devesh S, Rao A, Shenoy G, Wijerathne H, Sooriyaperkasam N (2022) Repurposing plastic wastes in non-conventional engineered wood building bricks for constructional application—a mechanical characterization using experimental and statistical analysis
Basalp D, Tihminlioglu F, Sofuoglu SC, Inal F, Sofuoglu A (2020) Utilization of municipal plastic and wood waste in industrial manufacturing of wood plastic composites. Waste Biomass Valorization 11(10):5419–5430
Xiao R, Yu Q, Ye H, Shi Y, Sheng Y, Zhang M et al (2023) Visual design of high-density polyethylene into wood plastic composite with multiple desirable features: a promising strategy for plastic waste valorization. J Build Eng 63
Zhang X, Bo X (2012) Study on the technical conditions of old newspaper (ONP)/recycled-polypropylene(rPP) composites. 2nd China Academic Conference on Printing and Packaging (CACPP 2012). 262. Beijing, Peoples R China. 418-+
Lykidis C, Parnavela C, Goulounis N, Grigoriou A (2012) Potential for utilizing waste corrugated paper containers into wood composites using UF and PMDI resin systems. Eur J Wood Wood Prod 70(6):811–818
Sangsai N, Laemlaksakul V (2013) Optimization of processing factors for particleboard manufacturing using waste tire rubber crumbs and wood particle. International Conference on Advances and Trends in Engineering Materials and their Applications (ATEMA 2013). 849. Hong Kong Educ Soc, Singapore. 326-+
Xu X, Tian F, Li X (2020) Regenerated waste tire powders as fillers for wood fiber composites. BioResources 15(2):3029–3040
Li D, Hu J, Wang C, Guo L, Zhou J (2023) Metal-organic framework-induced edge-riched growth of layered Bi2Se3 towards ultrafast Na-ion storage. J Power Sources 555
Wang C, Liu X, Yang T, Sridhar D, Algadi H, Bin Xu B et al (2023) An overview of metal-organic frameworks and their magnetic composites for the removal of pollutants. Sep Purif Technol 320
Yang J, Tong L, Alsubaie AS, Mahmoud KH, Guo Y, Liu L et al (2022) Hybrid proton exchange membrane used in fuel cell with amino-functionalized metal-organic framework in sulfonated polyimide to construct efficient ion transport channel. Adv Compos Hybrid Mater 5(2):834–842
Xu H, Zu M, Cheng H, Liu D, Xie W (2022) A composite coating based on metal-organic framework MIL-101(Cr) synthesised by L-malic acid as mineralising agent for thermal management. Adv Compos Hybrid Mater 5(4):2896–2905
Zhang S, Cheng B, Jia Z, Zhao Z, Jin X, Zhao Z et al (2022) The art of framework construction: hollow-structured materials toward high-efficiency electromagnetic wave absorption. Adv Compos Hybrid Mater 5(3):1658–1698
Chamanehpour E, Sayadi MH, Hajiani M (2022) A hierarchical graphitic carbon nitride supported by metal-organic framework and copper nanocomposite as a novel bifunctional catalyst with long-term stability for enhanced carbon dioxide photoreduction under solar light irradiation. Adv Compos Hybrid Mater 5(3):2461–2477
Wu N, Zhao B, Liu J, Li Y, Chen Y, Chen L et al (2021) MOF-derived porous hollow Ni/C composites with optimized impedance matching as lightweight microwave absorption materials. Adv Compos Hybrid Mater 4(3):707–715
Ma X, Xiong Y, Liu Y, Han J, Duan G, Chen Y et al (2022) When MOFs meet wood: from opportunities toward applications. Chem 8(9):2342–2361
Huang G, Huang C, Tao Y, Li H (2021) Localized heating driven selective growth of metal-organic frameworks (MOFs) in wood: a novel synthetic strategy for significantly enhancing MOF loadings in wood. Appl Surf Sci 564
Spiess A, Wiebe J, Iwaschko E, Woschko D, Janiak C (2022) Wood modification for the synthesis of MOF@wood composite materials with increased metal-organic framework (MOF) loading. Mol Syst Des Eng 7(12):1682–1696
Wang Z, Yin F, Zhang X-F, Zheng T, Yao J (2022) Delignified wood filter functionalized with metal-organic frameworks for high-efficiency air filtration. Sep Purif Technol 293
Liu T, Zhang X, Gu A, Liu Y, Chen M, Wang H et al (2022) In-situ grown bilayer MOF from robust wood aerogel with aligned microchannel arrays toward selective extraction of uranium from seawater. Chem Eng J 433
Zhang W, Li M, Zhong L, Huang J, Liu M (2022) A family of MOFs@Wood-Derived hierarchical porous composites as freestanding thick electrodes of solid supercapacitors with enhanced areal capacitances and energy densities. Mater Today Energy 24
Zhu G, Li H, Deng S, Zhang C, Li K, Zhang X (2022) In-situ growth of metal-organic framework (Cu-UiO-66) within wood scaffold for improved flame retardancy. Wood Mater Sci Eng
Yang S, Shi C, Qu K, Sun Z, Li H, Xu B et al (2023) Electrostatic self-assembly cellulose nanofibers/MXene/nickel chains for highly stable and efficient seawater evaporation and purification. Carbon Lett
Ding Z, Tian Z, Ji X, Dai H, Si C (2022) Bio-inspired catalytic one-step prepared R-siloxane cellulose composite membranes with highly efficient oil separation. Adv Compos Hybrid Mater 5(3):2138–2153
Kong D, El-Bahy ZM, Algadi H, Li T, El-Bahy SM, Nassan MA et al (2022) Highly sensitive strain sensors with wide operation range from strong MXene-composited polyvinyl alcohol/sodium carboxymethylcellulose double network hydrogel. Adv Compos Hybrid Mater 5(3):1976–1987
Ruan J, Chang Z, Rong H, Alomar TS, Zhu D, AlMasoud N et al (2023) High-conductivity nickel shells encapsulated wood-derived porous carbon for improved electromagnetic interference shielding. Carbon 213
Wei D, Weng M, Mahmoud MHH, Elnaggar AY, El Azab IH, Sheng X et al (2022) Development of novel biomass hybrid aerogel supported composite phase change materials with improved light-thermal conversion and thermal energy storage capacity. Adv Compos Hybrid Mater 5(3):1910–1921
Chen W, Lin H, Wu Y, Yang M, Zhang X, Zhu S et al (2022) Fluorescent probe of nitrogen-doped carbon dots derived from biomass for the sensing of MnO4- in polluted water based on inner filter effect. Adv Compos Hybrid Mater 5(3):2378–2386
Yuan B, Wang Y, Elnaggar AY, El Azab IH, Huang M, Mahmoud MHH et al (2022) Physical vapor deposition of graphitic carbon nitride (g-C3N4) films on biomass substrate: optoelectronic performance evaluation and life cycle assessment. Adv Compos Hybrid Mater 5(2):813–822
Gao T, Ma Y, Ji L, Zheng Y, Yan S, Li Y et al (2022) Nickel-coated wood-derived porous carbon (Ni/WPC) for efficient electromagnetic interference shielding. Adv Compos Hybrid Mater 5(3):2328–2338
Wei Y, Liang D, Zhou H, Huang S, Zhang W, Gu J et al (2022) Facile preparation of MXene-decorated wood with excellent electromagnetic interference shielding performance. Compos Part A Appl Sci Manuf 153
Wang Z, Yin K, Zhang Y, Sun K, Xie L, Cong M et al (2022) Two-dimensional Ti3C2Tx/carbonized wood metacomposites with weakly negative permittivity. Adv Compos Hybrid Mater 5(3):2369–2377
Zhang H, Li S, Hang H, Wang R, Cheng C, Fedorovich KV et al (2023) Mildew-resistant wood building materials with titanium oxide nanosheet 21:816
Liang C, Du Y, Wang Y, Ma A, Huang S, Ma Z (2021) Intumescent fire-retardant coatings for ancient wooden architectures with ideal electromagnetic interference shielding. Adv Compos Hybrid Mater 4(4):979–988
Yuan B, Guo M, Murugadoss V, Song G, Guo Z (2021) Immobilization of graphitic carbon nitride on wood surface via chemical crosslinking method for UV resistance and self-cleaning. Adv Compos Hybrid Mater 4(2):286–293
Zhang H, Wang R, Wang L, Li S, Yuan Y, Wang N et al (2023) Super-Hydrophobic Wood Composite with Plexiglass. Coating 23:865
Cheng M, Ying M, Zhao R, Ji L, Li H, Liu X et al (2022) Transparent and flexible electromagnetic interference shielding materials by constructing sandwich AgNW@MXene/wood composites. ACS Nano 16(10):16996–17007
Sema A, Khatri J, Dhar B, Kulsi G, Bhattacharyya JJEMM (2023) On the utility of teakwood biochar for iron contaminants removal from water 21:1–24
Xue R, Guo H, Yang W, Huang S-L, Yang G-Y (2022) Cooperation between covalent organic frameworks (COFs) and metal organic frameworks (MOFs): application of COFs-MOFs hybrids. Adv Compos Hybrid Mater 5(3):1595–1611
Li B, Lv Y-K, Wang Z-D, Peng P, Zang S-Q (2021) Edge confined covalent organic framework with efficient biocompatibility and photothermic conversion. Nano Today 37
Wang W, Song Y, Chen J, Yang Y, Wang J, Song Y et al (2022) Polyoxometalate-covalent organic framework hybrid materials for pH-responsive photothermal tumor therapy. J Mater Chem B 10(7):1128–1135
Wang H, Yang Y, Yuan X, Teo WL, Wu Y, Tang L et al (2022) Structure-performance correlation guided applications of covalent organic frameworks. Mater Today 53:106–133
Xu Y, Wu T, Cui Z, Kang L, Cai Y, Li J et al (2022) In situ growth of COFs within wood microchannels for wastewater treatment and oil-water separation. Sep Purif Technol 303
Funding
This work was financially supported by the National Natural Science Foundation of China (31560192) and the Science and Technology Innovation Program of Hunan Province (project no. 2018NK2042).
Author information
Authors and Affiliations
Contributions
Yan Yang, Xuelian Kang, and Yafeng Yang wrote the main manuscript text. Haoran Ye, Jinxuan Jiang, Guiyang Zheng, and Kexin Wei prepared all the figures. Shengbo Ge, Su Shiung Lam, and Xiangmeng Chen edited the main manuscript text. Hui Ouyang and Wanxi Peng revised and supported funding. All authors reviewed the manuscript.
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Highlights
• New wood-based composites have promoted the application in high tech field.
• Wood-based composites without synthetic adhesives help create a safe and healthy living environment.
• Wood-based composites made from waste can reduce the use of wood and reduce costs.
• Functional additives endow materials with various properties.
• Functional additives have expanded the application potential of wood.
Supplementary Information
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yang, Y., Kang, X., Yang, Y. et al. Research progress in green preparation of advanced wood-based composites. Adv Compos Hybrid Mater 6, 202 (2023). https://doi.org/10.1007/s42114-023-00770-w
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s42114-023-00770-w