Abstract
When laminated glass shatters under impact, most of the energy dissipation occurs in the coupled delamination and stretching of the polymer interlayer between broken chunks of glass. The strong dependency of these mechanisms on interlayer nature, on loading rate and on temperature has been previously investigated: however, the effect of the interfacial adhesion is unexplored. In this work, a surface modification technique is proposed, along with a mechanical characterization of the debonding with the Through Crack Tensile Test. We show that while increasing adhesion has the effect of enhancing the energy required to propagate the delamination fronts as well as the stretch level of the delaminated interlayer, the dissipation associated to the stretching of the volume of the PVB interlayer seems unaffected. We attribute this effect to the competition between the changes in both stretch and stretch rate in the viscoelastic interlayer. Finally, we discuss the experimental observation of the limits of the steady-state debonding regime, related to the competition between adhesive crack propagation and cohesive failure in the interlayer.
Similar content being viewed by others
References
Bárány, T., Czigány, T., Karger-Kocsis, J.: Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: a review. Prog. Polym. Sci. 35(10), 1257–1287 (2010). https://doi.org/10.1016/j.progpolymsci.2010.07.001
Bennison, S.J., Jagota, A., Smith, C.A.: Fracture of glass/poly(vinyl butyral) (butacite®) laminates in biaxial flexure. J. Am. Ceram. Soc. 82(7), 1761–1770 (1999). https://doi.org/10.1111/j.1151-2916.1999.tb01997.x
Botz, M., Wilhelm, K., Siebert, G.: Experimental investigations on the creep behaviour of PVB under different temperatures and humidity conditions. Glass Struct. Eng. 4(3), 389–402 (2019). https://doi.org/10.1007/s40940-019-00098-2
Butchart, C., Overend, M.: Delamination in fractured laminated glass, pp. 249–257 (2012)
Butchart, C., Overend, M.: Influence of moisture on the post-fracture performance of laminated glass. Proc. Glass Perform. Days 2013, 59–61 (2013)
Creton, C., Ciccotti, M.: Fracture and adhesion of soft materials: a review. Rep. Prog. Phys. 79(4), 046601 (2016)
Del Linz, P., Hooper, P.A., Arora, H., Wang, Y., Smith, D., Blackman, B.R.K., Dear, J.P.: Delamination properties of laminated glass windows subject to blast loading. Int. J. Impact Eng. 105, 39–53 (2017). https://doi.org/10.1016/j.ijimpeng.2016.05.015
Delincé, D.: Experimental Approaches for Assessing Time and Temperature Dependent Performances of Fractured Laminated Safety Glass. Dissertation, Ghent University (2014)
Delincé, D., Callewaert, D., Vanlaere, W., Belis, J., Depauw, J.: Plastic deformation of polymer interlayers during post-breakage behavior of laminated glass—partim 2: experimental validation. Int. J. Mod. Phys. B 22(31n32), 5447–5452 (2012). https://doi.org/10.1142/s0217979208050632
Delincé, D., Sonck, D., Belis, J., Callewaert, D., Van Impe, R.: Experimental investigation of the local bridging behaviour of the interlayer in broken laminated glass. In: International Symposium on the Application of Architectural Glass ISAAG 2008 Conference Proceedings, Munich, Germany, pp. 41–49 (2008)
Elzière, P.: Verre feuilleté : rupture dynamique d’adhésion. Ph.D. Thesis, Université Pierre et Marie Curie (Paris VI) (2016)
Elzière, P., Dalle-Ferrier, C., Creton, C., Barthel, E., Ciccotti, M.: Large strain viscoelastic dissipation during interfacial rupture in laminated glass. Soft Matter 13(8), 1624–1633 (2017). https://doi.org/10.1039/c6sm02785g
Elzière, P., Fourton, P., Demassieux, Q., Chennevière, A., Dalle-Ferrier, C., Creton, C., Ciccotti, M., Barthel, E.: Supramolecular structure for large strain dissipation and outstanding impact resistance in polyvinylbutyral. Macromolecules 52(20), 7821–7830 (2019). https://doi.org/10.1021/acs.macromol.9b01277
Ferretti, D., Rossi, M., Royer-Carfagni, G.: Through-Cracked Tensile delamination tests with photoelastic measurements. In: Challenging Glass 3, 2012. IOS Press, Delft TU (2012)
Franz, J., Schneider, J., Kuntsche, J., Hilcken, J.: Untersuchungen zum Resttragverhalten von Verbundglas: Through-Cracked-Tensile test. Stahlbau 83(S1), 241–252 (2014). https://doi.org/10.1002/stab.201490063
Fyfe, C.A., Aroca, P.P.: A kinetic analysis of the initial stages of the sol–gel reactions of methyltriethoxysilane (MTES) and a mixed MTES/tetraethoxysilane system by high-resolution \(^29\) Si NMR spectroscopy. J. Phys. Chem. B 101(46), 9504–9509 (1997). https://doi.org/10.1021/jp971559x
Galuppi, L., Royer-Carfagni, G.: A homogenized analysis à la Hashin for cracked laminates under equi-biaxial stress. Applications to laminated glass. Compos. Part B: Eng. 111, 332–347 (2017). https://doi.org/10.1016/j.compositesb.2016.11.027
Griffith, A.A.: The phenomena of rupture and flow in solids. Philos. Trans. R. Soc. Lond. Ser. A, Contain. Pap. Math. Phys. Charact. 221(582–593), 163–198 (1921). https://doi.org/10.1098/rsta.1921.0006
Huntsberger, J.R.: Adhesion of plasticized polyvinyl butyral) to glass. J. Adhes. 13(2), 107–129 (1981). https://doi.org/10.1080/00218468108073180
Innocenzi, P., Abdirashid, M.O., Guglielmi, M.: Structure and properties of sol-gel coatings from methyltriethoxysilane and tetraethoxysilane. J. Sol–Gel Sci. Technol. 3(1), 47–55 (1994). https://doi.org/10.1007/BF00490148
Matsuda, A., Matsuno, Y., Tatsumisago, M., Minami, T.: Fine patterning and characterization of gel films derived from methyltriethoxysilane and tetraethoxysilane. J. Am. Ceram. Soc. 81(11), 2849–2852 (1998). https://doi.org/10.1111/j.1151-2916.1998.tb02705.x
Muralidhar, S., Jagota, A., Bennison, S.J., Saigal, S.: Mechanical behaviour in tension of cracked glass bridged by an elastomeric ligament. Acta Mater. 48(18–19), 4577–4588 (2000). https://doi.org/10.1016/S1359-6454(00)00244-5
Nourry, E.: Comportement des vitrages feuilletés sous impacts perforants. Ph.D. Thesis, ENSAM, Paris (2005)
Novotny, M., Poot, B.: Influence of temperature on laminated glass performances assembled with various interlayers. Challenging Glass Conf Proc 5, 219–232 (2016). https://doi.org/10.7480/cgc.5.2248
Prabakar, S., Assink, R.A.: Hydrolysis and condensation kinetics of two component organically modified silica sols. J. Non-Cryst. Solids 211(1–2), 39–48 (1997). https://doi.org/10.1016/S0022-3093(96)00634-5
Rivlin, R.S., Thomas, A.G.: Rupture of rubber. I. Characteristic energy for tearing. J. Polym. Sci. Part A: Polym. Chem. 10(3), 291–318 (1953). https://doi.org/10.1002/pol.1953.120100303
Samieian, M.A., Cormie, D., Smith, D., Wholey, W., Blackman, B.R.K., Dear, J.P., Hooper, P.A.: Temperature effects on laminated glass at high rate. Int. J. Impact Eng. 111, 177–186 (2018). https://doi.org/10.1016/j.ijimpeng.2017.09.001
Seshadri, M., Bennison, S.J., Jagota, A., Saigal, S.: Mechanical response of cracked laminated plates. Acta Mater. 50(18), 4477–4490 (2002). https://doi.org/10.1016/S1359-6454(02)00255-0
Sha, Y., Hui, C.Y., Kramer, E.J., Garrett, P.D., Knapczyk, J.W.: Analysis of adhesion and interface debonding in laminated safety glass. J. Adhes. Sci. Technol. 11(1), 49–63 (1997). https://doi.org/10.1163/156856197X01010
Treloar, L.R.G.: The Physics of Rubber Elasticity. Oxford University Press, New York (1975)
van Bommel, M.J., Bernards, T.N.M., Boonstra, A.H.: The influence of the addition of alkyl-substituted ethoxysilane on the hydrolysis–condensation process of TEOS. J. Non-Cryst. Solids 128(3), 231–242 (1991). https://doi.org/10.1016/0022-3093(91)90461-E
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
The authors declare they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Fourton, P., Piroird, K., Ciccotti, M. et al. Adhesion rupture in laminated glass: influence of adhesion on the energy dissipation mechanisms. Glass Struct Eng 5, 397–410 (2020). https://doi.org/10.1007/s40940-020-00136-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40940-020-00136-4