Abstract
In this study, a concept of low cost injection molding system is presented. A prototype of a vertical injection molding machine has been designed and built based on the basic principles of injection molding. The developed system consists of plunger, melting chamber and custom-made mold. The plunger is used to deliver plastic melt from the melting chamber into the specific shape of the mold cavity. The performance of the custom-made machine is tested by successfully fabricated tensile specimen, Izod specimen, microchannels and gear shapes. The machine is capable of producing plastic parts of various shapes and sizes.
Similar content being viewed by others
References
Chang PC, Sheng JH, Huei HL, Durn YH (2007) Development of an external-type microinjection molding module for thermoplastic polymer. J Mater Process Technol 184:163–172
Flinn RA, Trojan PK (1981) Engineering materials and their application, 2nd edn. Houghto Mifflin Company, Boston
Huang CK (2007) Polymeric nanofeatures of 100 nm using injection moulding for replication. J Micromech Microeng 17:1518–1526
Huang CK (2006) Filling and wear behaviors of micro-molded parts made with nanomaterials. Eur Polym J 42:2174–2184
Khan MC, Saile V (2004) Applications of LIGA technology to precision manufacturing of high-aspect-ratio micro-components and -systems: a review. Microelectron J 35:131–143
Michaeli W, Spennemann A, Gartner R (2002) New plastification concepts for micro injection moulding. Microsyst Technol 8:55–57
Michaeli W, Spennemann A (2001) A new injection molding technology for micro parts. J Polym Eng 21:87–98
Ming CY, Wen BY, Pe MH (2007) Micro-injection molding with the infrared assisted mold heating system. Mater Sci Eng A 460–461:288–295
Quadrini F, Santo L, Trovalusci F (2008) Direct molding of thermoplastic micro-parts. J Micromech Microeng 18:105006 (6 pp)
Timings RL (1985) “Materials Technology Level 3”, Longman Group Ltd
Zhao J, Mayes RH, Chen G, Xie H, Chan PS (2003) Effects of process parameters on the micro molding process. Polym Eng Sci 43:1542–1554
Zhao J, Mayes RH, Chen G, Chan PS, Xiong ZJ (2003) Polymer micromould design and micromoulding process. Plast Rubber Compos 32:240–247
Zhao J, Mayes RH, Ge C, Sing CP (2003) Process stability and capability studies of polymer micro moulding process. Mater Sci Forum 437–438:125–133
Acknowledgments
The authors acknowledge the financial support from the Ministry of Higher Education, Malaysia, under Research University grant scheme project number RG027/09AET.
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Anselmo Diniz.
Rights and permissions
About this article
Cite this article
Azuddin, M., Choudhury, I.A. & Taha, Z. Development and performance evaluation of a low-cost custom-made vertical injection molding machine. J Braz. Soc. Mech. Sci. Eng. 37, 79–86 (2015). https://doi.org/10.1007/s40430-014-0145-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40430-014-0145-z