Abstract
The deformation gradients in multilayered hot roll-bonded composite materials incorporating two dissimilar face-centered cubic metals, i.e., brass and Cu, were investigated by characterizing the deformation microstructure, hardness and texture at different thickness positions of the composites. For the constitutive metals, the center part of each metal sheet forms the substructure containing coarse grains, while the ultrafine grains and significant shear banding form in the outer part. As deformation increases, the cross-interface shear occurs in the Cu sheet of the composites. Then, grain fragmentation, shear banding and dynamic recovery become the main factors that influence hardness of the metal. Moreover, in the co-deformed composites, the interface between brass and Cu plays a role in texture developments of the individual metals.
Similar content being viewed by others
References
Y. Liu, D. Bufford, H. Wang, C. Sun, X. Zhang, Acta Mater. 59, 1924 (2011)
B. Ham, X. Zhang, Mater. Sci. Eng. A 528, 2028 (2011)
W.Z. Han, E.K. Cerreta, N.A. Mara, I.J. Beyerlein, J.S. Carpenter, S.J. Zheng, C.P. Trujillo, P.O. Dickerson, A. Misra, Acta Mater. 63, 150 (2014)
J.J. Niu, J.Y. Zhang, G. Liu, P. Zhang, S.Y. Lei, G.J. Zhang, J. Sun, Acta Mater. 60, 3677 (2012)
Y.S. Li, N.R. Tao, K. Lu, Acta Mater. 56, 230 (2008)
F.K. Yan, G.Z. Liu, N.R. Tao, K. Lu, Acta Mater. 60, 1059 (2012)
Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, R.G. Hong, Scr. Mater. 39, 1221 (1998)
N. Tsuji, Y. Saito, S.H. Lee, Y. Minamino, Adv. Eng. Mater. 5, 338 (2003)
K. Wu, H. Chang, E. Maawad, W.M. Gan, H.G. Brokmeier, M.Y. Zheng, Mater. Sci. Eng. A 527, 3073 (2010)
G.H. Min, J.M. Lee, S.B. Kang, H.W. Kim, Mater. Lett. 60, 3255 (2006)
L.W. Chen, Q.N. Shi, D.Q. Chen, S.P. Zhou, J.L. Wang, X.M. Luo, Mater. Sci. Eng. A 508, 37 (2009)
H. Chang, M.Y. Zheng, K. Wu, W.M. Gan, L.B. Tong, H.G. Brokmeier, Mater. Sci. Eng. A 527, 7176 (2010)
S.Y. Li, F.W. Sun, H. Li, Acta Mater. 58, 1317 (2010)
H.S. Liu, B. Zhang, G.P. Zhang, Scr. Mater. 65, 891 (2011)
J.S. Carpenter, S.C. Vogel, J.E. LeDonne, D.L. Hammon, I.J. Beyerlein, N.A. Mara, Acta Mater. 60, 1576 (2012)
Y.B. Zhang, O.V. Mishin, N. Kamikawa, A. Godfrey, W. Liu, Q. Liu, Mater. Sci. Eng. A 576, 160 (2013)
X. Liu, N.T. Nuhfer, A.D. Rollett, S. Sinha, S.-B. Lee, J.S. Carpenter, J.E. LeDonne, A. Darbal, K. Barmak, Acta Mater. 64, 333 (2014)
N. Kamikawa, T. Sakai, N. Tsuji, Acta Mater. 55, 5873 (2007)
H.W. Kim, S.B. Kang, N. Tsuji, Y. Minamino, Metall. Mater. Trans. A 36, 3151 (2005)
J. Hirsch, K. Lücke, M. Hatherly, Acta Metall. 36, 2863 (1988)
T. Leffers, R.K. Ray, Prog. Mater Sci. 54, 351 (2009)
T. Leffers, J.B. Bilde-Sorensen, Acta Metall. Mater. 38, 1917 (1990)
N. Jia, F. Roters, P. Eisenlohr, C. Kords, D. Raabe, Acta Mater. 60, 1099 (2012)
K. Pawlik, P. Ozga, LaboTex: the texture analysis software, Göttinger Arbeiten zur Geologie und Paläontologie, SB4 (1999)
N.V. Govindaraj, J.G. Frydendahl, B. Holmedal, Mater. Des. 52, 905 (2013)
E.C.S. Corrêa, M.T.P. Aguilar, P.R. Cetlin, J. Mater. Proc. Technol. 124, 384 (2002)
L. Yang, L. Lu, Scr. Mater. 69, 242 (2013)
M. Hölscher, D. Raabe, K. Lücke, Acta Metall. Mater. 42, 879 (1994)
I.J. Beyerlein, N.A. Mara, D. Bhattacharyya, D.J. Alexander, C.T. Necker, Int. J. Plastic. 27, 121 (2011)
A. Duckham, R.D. Knutsen, O. Engler, Acta Mater. 49, 2739 (2001)
M.Z. Quadir, M. Ferry, O. Al-Buhamad, P.R. Munroe, Acta Mater. 57, 29 (2009)
N. Jia, F. Roters, P. Eisenlohr, D. Raabe, X. Zhao, Acta Mater. 61, 4591 (2013)
Acknowledgments
This work was financially supported by the National Natural Science Foundation of China (Nos. 51202256 and 51201028), the Fundamental Research Funds for the Central Universities (No. N130510001) and the Program for New Century Excellent Talents in University (No. NCET-13-0104).
Author information
Authors and Affiliations
Corresponding author
Additional information
Available online at http://link.springer.com/journal/40195
Rights and permissions
About this article
Cite this article
Jia, N., Zhu, MW., Zheng, YR. et al. Inhomogeneous Deformation of Multilayered Roll-Bonded Brass/Cu Composites. Acta Metall. Sin. (Engl. Lett.) 28, 600–607 (2015). https://doi.org/10.1007/s40195-015-0237-5
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40195-015-0237-5