Abstract
Vortex levitation can achieve non-contact handling by blowing air into a vortex cup through a tangential nozzle to generate a swirling flow. In this paper, we focused on the relationship between the sucking pressure and the flow dynamics when gap distance from the cup to a work piece changes. Then simultaneous measurement of a pressure and a flow field in the cup was performed. As a result, the mean pressure changes and the pressure fluctuation inside the cup enhances with increasing gap height. Especially, periodic pressure perturbation is observed with wide gap height and it synchronizes with an eccentric rotation of the swirling flow. It is also found that the rotation axis of swirling flow steadily inclines against the central axis of the cup for appropriate gap height.
Graphical Abstract
Similar content being viewed by others
References
Brandt E.H. (1989), Levitation in physics, Science, 243
Cortes C, Gil A (2007) Modeling the gas and particle flow inside cyclone separators. Prog Energy Combust Sci 33:409–452
Davis S, Gray JO, Caldwell DG (2008) An end effector based on the Bernoulli principle for handling sliced fruit and vegetables. Robot Comput Integr Manuf 24(2):249–257
Dini G, Fantoni G, Failli F (2009) Grasping leather plies by Bernoulli grippers. CIRP Ann Manuf Technol 58(1):21–24
Iio S, Umebachi M, Li X, Kagawa T, Ikeda T (2008) Research on a non-contact handling system using swirling flow (influence of cup-to-work gap thickness on swirling flow characteristics). SICE Trans Ind Appl 7(12):79–84
Ito S, Ogawa K, Kuroda C (1979) Decay process of swirling flow in a pipe. Int Chem Eng 19:600–605
Kitoh O (1991) Experimental study of turbulent swirling flow in a straight pipe. J Fluid Mech 225:445–479
Kumar R, Conover T (1993) Flow visualization studies of a swirling flow in a cylinder. Exp Therm Fluid Sci 7(3):254–262
Li X, Tokunaga H, Cai M, Funaki T, Kawashima K, Kagawa T (2007) Research on a non-contact handling system using swirling flow (1st report: basic characteristics of a vortex chuck). Trans JFPS 38(1):1–6
Li X, Kawashima K, Kagawa T (2008) Analysis of vortex levitation. Exp Therm Fluid Sci 32:1448–1454
Nishimura K, Takama N, Endoh T, Yoshiki H (1990) Velocity distribution of swirl flow in a circular cylinder. Manuf Res 42(11):653–656
Nissan AH, Bresan VP (1961) Swirling flow in cylinders. AIChE J 7:543–547
Vandaele V, Lambert P, Delchambre A (2005) Non-contact handling in microassembly (acoustical levitation). Precis Eng 29(4):491–505
Waltham C, Bendall S, Kotlicki A (2003) Bernoulli levitation. Am J Phys 71(2):176–179
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Iio, S., Umebachi, M., Li, X. et al. Performance of a non-contact handling device using swirling flow with various gap height. J Vis 13, 319–326 (2010). https://doi.org/10.1007/s12650-010-0045-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12650-010-0045-y