Abstract
Most production methods of heavy oil involve thermal production. However, it is challenging to delineate the thermal-affected zone due to complex reservoir conditions. With steam injected, the heavy oil viscosity drops; the reservoir density and velocity decrease accordingly, causing changes to seismic impedance. Moreover, the oil-and-water viscosity ratio and permeability show the difference with changing temperature, indicating that the reservoir’s ability to transmit seismic waves would also be temperature-dependent. Therefore, the seismic responses and attenuation characteristics of the steam chamber can be helpful to monitor the steam-affected zone. We introduce an improved viscoelastic model to approximate the heavy oil reservoir during thermal production, and use the frequency-space domain finite difference algorithm to simulate the seismic wave-fields. Numerical results demonstrate that this model is applicable to a wide temperature range, and can effectively reveal the seismic characteristics of the steam chamber. Through analyzing the propagation differences of seismic waves under different temperatures, it is concluded that the attenuation coefficient, root-mean-square amplitude difference and amplitude ratio of PP-wave and PS-wave under different conditions can reveal the temperature variation in the steam chamber, with which it is possible to detect the steam chamber spatial distribution.
Similar content being viewed by others
References Cited
Batzle, M., Hofmann, R., Han, D. H., 2006. Heavy Oils—Seismic Properties. The Leading Edge, 25(6): 750–756. https://doi.org/10.1190/1.2210074
Batzle, M., Wang, Z. J., 1992. Seismic Properties of Pore Fluids. Geophysics, 57(11): 1396–1408. https://doi.org/10.1190/L1443207
Behura, J., Batzle, M., Hofmann, R., et al., 2007. Heavy Oils: Their Shear Story. Geophysics, 72(5): E175–E183. https://doi.org/10.1190/1.2756600
Chen, L., Lin, W. B., Chen, P., et al., 2021. Porosity Prediction from Well Logs Using Back Propagation Neural Network Optimized by Genetic Algorithm in one Heterogeneous Oil Reservoirs of Ordos Basin, China. Journal of Earth Science, 32(4): 828–838. https://doi.org/10.1007/s12583-020-1396-5
Cheng, Y. F., Yang, D. H., Yang, H. Z., 2002. Biot/Squirt Model in Viscoelastic Porous Media. Chinese Physics Letters, 19(3): 445–448. https://doi.org/10.1088/0256-307x/19/3/348
Das, A., Batzle, M., 2008. Modeling Studies of Heavy Oil—In between Solid and Fluid Properties. The Leading Edge, 27(9): 1116–1123. https://doi.org/10.1190/1.2978973
Dvorkin, J., Nur, A., 1993. Dynamic Poroelasticity: A Unified Model with the Squirt and the Biot Mechanisms. Geophysics, 58(4): 524–533. https://doi.org/10.1190/1.1443435
Eastwood, J., Lebel, P., Dilay, A., et al., 1994. Seismic Monitoring of Steam-Based Recovery of Bitumen. The Leading Edge, 13(4): 242–251. https://doi.org/10.1190/1.1437015
Fan, Y. F., Mei, L. F., Liu, H. J., 2016. Geochemical Characteristics and Accumulated Process of Heavy Crude Oil of Chunguang Oilfield in Junggar Basin, China. Journal of Earth Science, 27(5): 846–855. https://doi.org/10.1007/s12583-016-0703-7
Guo, J. X., Germán Rubino, J., Barbosa, N. D., et al., 2018. Seismic Dispersion and Attenuation in Saturated Porous Rocks with Aligned Fractures of Finite Thickness: Theory and Numerical Simulations—Part 1: P-Wave Perpendicular to the Fracture Plane. Geophysics, 83(1): WA49–WA62. https://doi.org/10.1190/geo2017-0065.1
Guo, J. X., Han, X. H., 2016. Rock Physics Modelling of Acoustic Velocities for Heavy Oil Sand. Journal of Petroleum Science and Engineering, 145: 436–443. https://doi.org/10.1016/j.petrol.2016.05.028
Gurevich, B., Osypov, K., Ciz, R., et al., 2008. Modeling Elastic Wave Velocities and Attenuation in Rocks Saturated with Heavy Oil. Geophysics, 73(4): E115–E122. https://doi.org/10.1190/1.2940341
Han, D. H., Liu, J. J., Baztle, M., 2008. Seismic Properties of Heavy Oils—Measured Data. The Leading Edge, 27(9): 1108–1115. https://doi.org/10.1190/1.2978972
Hao, Y. J., Wen, X. T., Zhang, B., et al., 2016. Q Estimation of Seismic Data Using the Generalized S-Transform. Journal of Applied Geophysics, 135: 122–134. https://doi.org/10.1016/j.jappgeo.2016.10.004
Jiao, H. Y., Du, X. L., Zhao, M., et al., 2021. Nonlinear Seismic Response of Rock Tunnels Crossing Inactive Fault under Obliquely Incident Seismic P Waves. Journal of Earth Science, 32(5): 1174–1189. https://doi.org/10.1007/s12583-021-1483-2
Kato, A., 2010. Reservoir Characterization and Steam Monitoring in Heavy Oil Reservoirs: [Dissertation]. University of Houston, Houston
Li, H., Han, D. H., Yuan, H. M., et al., 2016. Porosity of Heavy Oil Sand: Laboratory Measurement and Bound Analysis. Geophysics, 81(2): D83–D90. https://doi.org/10.1190/geo2015-0178.1
Lu, J., Wang, Y., Yao, C., 2012. Separating P- and S-Waves in an Affine Coordinate System. Journal of Geophysics and Engineering, 9(1): 12–18. https://doi.org/10.1088/1742-2132/9/1/002
Macrides, C. G., Kanasewich, E. R., 1987. Seismic Attenuation and Poisson’s Ratios in Oil Sands from Crosshole Measurements. Journal of the Canadian Society of Exploration Geophysicists, 23(1): 46–55
Maini, B. B., Batycky, J. P., 1985. Effect of Temperature on Heavy-Oil/Water Relative Permeabilities in Horizontally and Vertically Drilled Core Plugs. Journal of Petroleum Technology, 37(8): 1500–1510. https://doi.org/10.2118/12115-pa
Min, D. J., Shin, C., Kwon, B. D., et al., 2000. Improved Frequency-Domain Elastic Wave Modeling Using Weighted-Averaging Difference Operators. Geophysics, 65(3): 884–895. https://doi.org/10.1190/1.1444785
Min, D. J., Shin, C., Yoo, H. S., 2004. Free-Surface Boundary Condition in Finite-Difference Elastic Wave Modeling. Bulletin of the Seismological Society of America, 94(1): 237–250. https://doi.org/10.1785/0120020116
Ren, X. X., Li, A. F., Fu, S. S., et al., 2018. Experimental Study on the Oil-Water Relative Permeability Relationship for Tight Sandstone Considering the Nonlinear Seepage Characteristics. Journal of Petroleum Science and Engineering, 161: 409–416. https://doi.org/10.1016/j.petrol.2017.12.003
Ruggieri, R., Trippetta, F., 2020. Petrophysical Properties Variation of Bitumen-Bearing Carbonates at Increasing Temperatures from Laboratory to Model. Geophysics, 85(5): MR297–MR308. https://doi.org/10.1190/geo2019-0790.1
Torabi, F., Mosavat, N., Zarivnyy, O., 2016. Predicting Heavy Oil/Water Relative Permeability Using Modified Corey-Based Correlations. Fuel, 163: 196–204. https://doi.org/10.1016/j.fuel.2015.09.035
Trippetta, F., Geremia, D., 2019. The Seismic Signature of Heavy Oil on Carbonate Reservoir through Laboratory Experiments and AVA Modelling. Journal of Petroleum Science and Engineering, 177: 849–860. https://doi.org/10.1016/j.petrol.2019.03.002
Wang, S. L., 2018. Experimental Study of Viscosity on Heavy Oil-Water Relative Permeability Curves: [Dissertation]. China University of Petroleum, QingDao. 89–108 (in Chinese with English Abstract)
Xie, P. Y., Yang, D. H., 2018. Seismic Wave Propagation Model in Near-Surface Strong-Attenuation Media. Chinese Journal of Geophysics, 61(3): 917–925 (in Chinese with English Abstract)
Yang, L., Yang, D. H., Nie, J. X., 2014. Wave Dispersion and Attenuation in Viscoelastic Isotropic Media Containing Multiphase Flow and Its Application. Science China Physics, Mechanics & Astronomy, 57(6): 1068–1077. https://doi.org/10.1007/s11433-014-5435-z
Yuan, H. M., Han, D. H., Huang, Q., 2019a. Porosity Measurement of Heavy Oil Sands. Geophysical Prospecting, 67(4): 1072–1081. https://doi.org/10.1111/1365-2478.12665
Yuan, H. M., Han, D. H., Zhao, L. X., et al., 2019b. Attenuation Analysis of Heavy Oil Sands Based on Laboratory Measurements. Geophysics, 84(5): B299–B309. https://doi.org/10.1190/geo2018-0171.1
Yuan, H. M., Han, D. H., Li, H., et al., 2020. The Effect of Rock Frame on Elastic Properties of Bitumen Sands. Journal of Petroleum Science and Engineering, 194: 107460. https://doi.org/10.1016/j.petrol.2020.107460
Yuan, H. M., Han, D. H., Zhang, W. M., 2016. Heavy Oil Sands Measurement and Rock-Physics Modeling. Geophysics, 81(1): D57–D70. https://doi.org/10.1190/geo2014-0573.1
Yuan, H. M., Han, D. H., Zhang, W. M., 2017. Seismic Characterization of Heavy Oil Reservoir during Thermal Production: A Case Study. Geophysics, 82(1): B13–B27. https://doi.org/10.1190/geo2016-0155.1
Yuan, H. M., Wang, Y., Han, D. H., et al., 2021. Velocity Measurement of North Sea Heavy Oil Sands under Changing Pressure and Temperature. Journal of Petroleum Science and Engineering, 205: 108825. https://doi.org/10.1016/j.petrol.2021.108825
Zhang, W. M., Youn, S., Doan, Q., 2007. Understanding Reservoir Architectures and Steam-Chamber Growth at Christina Lake, Alberta, by Using 4D Seismic and Crosswell Seismic Imaging. Spe Reservoir Evaluation & Engineering, 10: 446–452. https://doi.org/10.2118/97808-PA
Acknowledgments
This study is supported by the National Science Foundation of China (Nos. U1839208, 42104118), and the New Teacher Research Ability Improvement Project in China University of Geosciences (Beijing). The final publication is available at Springer via https://doi.org/10.1007/s12583-022-1618-0.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Zhang, Y., Wang, Y., Yuan, H. et al. Heavy Oil Reservoir Seismic Characteristics during Thermal Production: A Case Study. J. Earth Sci. 34, 1041–1052 (2023). https://doi.org/10.1007/s12583-022-1618-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12583-022-1618-0