Abstract
The three-dimensional forming property of the hernia repair mesh is very important in the application. In order to study the correlation between process parameters and formability property, three variables are set for the test: diameter of raw materials, structure and drawing-off density. Results show that within a certain range, the forming performance of the patch becomes better with the increasing of the diameter of raw materials, and comparing with the double-comb opening through structure, the forming properties of the double-comb velveteen structure are better. Besides, in the same conditions, the forming property is better with the draw-off density increases.
References
E. Iversen, A. Lykke, and M. Hensler, Hernia, 14, 555 (2010).
Y. Bilsel and I. Abci, Int. J. Surg., 10, 317 (2012).
H. Minhui, L. Xidong, and H. Rongkang, Macromol. Biosci., 18, 1 (2018).
A. Baktir, O. Dogru, and M. Girgin, Hernia, 17, 249 (2013).
S. Bringman, J. Conze, and D. Cuccurullo, Hernia, 14, 81 (2010).
A. M. S.S. Ibrahim, C. R. Vargas, and S. Colakoglu, J. Reconstructive Microsurgery, 31, 83 (2015).
N. Sanbhal, L. Limiao, and R. Xu, J. Ind. Text., 48, 333 (2018).
L. R. Khan, S. Liong, and A. C. De Beaux, Hernia, 14, 39 (2010).
, S. William and Burns, J. Surgical Res., 136, 1 (2006).
S. Ajeli, Jeddi, A. A. Ali, and A. Rastgo, J. Text. Inst., 100, 496 (2009).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yang, T., Xu, W. & Ma, P. Effect of Process Parameters on Three-dimensional Formability of Warp-knitted Polypropylene Hernia Repair Mesh. Fibers Polym 20, 210–215 (2019). https://doi.org/10.1007/s12221-019-8842-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-019-8842-y