Abstract
Vibration analysis of simply supported rotating cross-ply laminated stiffened cylindrical shell is performed using an energy approach which includes variational and averaging method. The stiffeners include rings and stringers. The equations are obtained by Rayleigh-Ritz method and Sander’s relations. To validate the present method, the results are compared to the results available in other literatures. A good adoption is observed in different type of results including isotropic shells, rotating laminated shells, stiffened isotropic shells and stiffened laminated shells. Then, the optimization of parameters due to shell and stiffeners is conducted by genetic algorithm (GA) method under weight and frequency constraints. Stiffener shape, material properties and dimensions are also optimized.
Similar content being viewed by others
References
C. W. Bert, J. L. Baker and D. M. Egle, Free vibrations of multilayer anisotropic cylindrical shells, Journal of Composite Materials, 3(3) (1969) 480–499.
B. K. Rath and Y. C. Das, Vibration of layered shells, Journal of Sound and Vibration, 28(4) (1973) 737–757.
A. Nosier and J. N. Reddy, Vibration and stability analyses of cross-ply laminated circular cylindrical shells, Journal of Sound and Vibration, 157 (1992) 139–159.
K. Y. Lam and W. Qian, Free vibration of symmetric angleply thick laminated composite cylindrical shells, Composites Engineering, 31B (2000) 345–354.
D. M. Egle and J. L. Sewall, An analysis of the free vibration of orthogonally stiffened cylindrical shells with stiffeners treated as discrete elements, AIAA Journal, 3 (1968) 518–526.
M. R. Peterson and D. E. Boyd, Free vibrations of circular cylinders with longitudinal, interior partitions, Journal of Sound and Vibration, 60 (1978) 45–62.
H. Zinberg and M. F. Symonds, The development of advanced composite tail rotor driveshaft, 26th Annual Forum of the American Helicopter Society, USA (1979) 1–14.
J. Singer, A. Rand and A. Rosen, Vibrations of axially loaded stiffened cylindrical panels with elastic restraints. Journal of Sound Vibration, 93 (1984) 397–408.
H. L. M. Reis, R. B. Goldman and P. H. Verstrate, Thinwalled laminated composite cylindrical tubes: Part III — critical speed analysis, Journal of Composites Technology and Research, 9 (1987) 58–62.
ESDU, Free vibrations of thin walled orthogonally stiffened circular cylindrical shells, ITEM No.80040 (1982).
T. Irie, G. Yamada and Y. Kobayashi, Free vibration of non-circular cylindrical shells with longitudinal interior partitions, Journal of Sound and Vibration, 96 (1984) 133–142.
B. Mustafa and R. Ali, An energy method for free vibration analysis of stiffened circular cylindrical shells, Computers and Structures, 32(2) (1989) 355–363.
Y. S. Lee and D. W. Kim, A study on the optimization of the stiffened cylindrical shell, Transactions of the KSME, 13(2) (1989) 205–212.
G. H. Bryan, On the beats in the vibrations of a revolving cylinder or bell, Proceeding of Cambridge Philosophy Society, (1890) 101–111.
J. N. Reddy and J. H. Starnes, General buckling of stiffened circular cylindrical shells according to a layer-wise theory, Computers and Structures, 49(4) (1993) 605–616.
Y. S. Lee and N. I. Hur, Buckling and vibration analysis of stiffened laminated cylindrical shells with cutouts, Proceedings of the 1993 Autumn KSAS Conference (1993) 437–440.
C. D. Kim and C. W. Bert, Critical speed analysis of laminated composite, hollow drive shafts, Composite Engineering, 3 (1993) 633–643.
A. Schokker, A. Kasagi and S. Sridharan, Dynamic interactive buckling of ring-stiffened composite shells, AIAA Journal, 33(10) (1995) 1956–1962.
S. Goswami and M. Muhopadhyay, Geometrically nonlinear transient dynamic response of laminated composite stiffened shells. Journal of Reinforced Plastics and Composites, 14 (1995) 618–640.
H. S. Kim and Y. H. Lee, Vibration analysis of rotating thin shells of revolution by finite element methods, Transactions of the KSME, 9(4) (1985) 487–496.
S. C. Huang and W. Soedel, On the forced vibration of simply supported rotating cylindrical shells, Journal of the Acoustic Society of America, 84(1) (1998) 275–285.
D. T. Huang and W. Soedel, Natural frequencies and mode shapes of a circular plate welded to a circular cylindrical shell at arbitrary axial positions, Journal of Sound and Vibration, 163 (1993) 403–427.
K. Suzuki, R. Takahashi and T. Kosawada, Analysis of vibrations of rotating thin circular cylindrical shells, JSME Transactions, 34(1) (1991) 19–25.
R. S. Langley, A dynamic stiffness technique for the vibration analysis of stiffened shell structures, Journal of Sound and Vibration, 156 (1992) 521–540.
H. Igawa, T. Saito and M. Endo M., Free vibration of rotating anisotropic shells of revolution, JSME Transactions, 59(566) (1993) 3052–3057.
K. Y. Lam and C. T. Loy, Analysis of rotating laminated cylindrical shells by different thin shell theories, Journal of Sound and Vibration, 186(1) (1995) 23–35.
J. Missaoui, L. Cheng and M. J. Richard, Free and forced vibration of a cylindrical shell with a floor partition, Journal of Sound and Vibration, 190 (1995) 21–40.
Y. S. Lee and Y. W. Kim, Vibration analysis of the rotating hybrid cylindrical shells laminated with metal and composite, Transactions of the KSME, 20(3) (1996) 968–977.
Y. S. Lee and Y. W. Kim, Vibration analysis of rotating composite cylindrical shells with orthogonal stiffeners, Computers and Structures, 69 (1998) 271–281.
Y. S. Lee and Y. W. Kim, Effect of boundary conditions on natural frequencies for rotating composite cylindrical shells with orthogonal stiffeners, Advances in Engineering Software, 30 (1999) 649–655.
J. S. Yim, D. S. Shon and Y. S. Lee, Free vibration of clamped-free circular cylindrical shell with a plate attached at an arbitrary axial position, Journal of Sound and Vibration, 213 (1998) 75–88.
K. Y. Lam and H. Li., On free vibration of rotating truncated circular orthotropic conical shell, Composites, 30 (1999) 135–144.
M. H. Kadivar and K. Samani, Free vibration of rotating thick composite cylindrical shells using layerwise laminated theory, Mechanics Research Communications, 27 (2000) 679–684.
K. M. Liew, T. Y. Ng, X. Zhao and J. N. Reddy, Harmonic reproducing kernel particle method for free vibration analysis of rotating cylindrical shell, Computer Methods in Applied Mechanics and Engineering, 191 (2002) 4141–4157.
X. M. Zhang, Vibration analysis of cross-ply laminated composite cylindrical shells using the wave propagation approach, Applied Acoustics, 62 (2001) 1221–1228.
X. M. Zhang, Parametric analysis of frequency of rotating laminated composite cylindrical shells with the wave propagation approach, Computer Methods in Applied Mechanics and Engineering, 191 (2002) 2029–2043.
Y. S. Lee, M. H. Choi and J. H. Kim, Free vibrations of laminated composite cylindrical shells with an interior rectangular plate, Journal of Sound and Vibration, 265 (2003) 795–817.
A. N. Nayak and J. N. Bandyopadhyay, On the free vibration of stiffened shallow shells, Journal of Sound and Vibration, 255(2) (2002) 357–382.
A. N. Nayak and J. N. Bandyopadhyay, Free Vibration Analysis of Laminated Stiffened Shells, Journal of Engineering Mechanics, 131(1) (2005) 100–105.
X. Zaho, K. M. Liew and T. Y. Ng, Vibrations of rotating cross-ply laminated circular cylindrical shells with stringer and ring stiffeners, International Journal of Solids and Structures, 39 (2002) 529–545.
S. Ramezani and M. T. Ahmadian, Free vibration analysis of rotating laminated cylindrical shells under different boundary conditions using a combination of the layerwise theory and wave propagation approach, Scientia Iranica, Transaction B: Mechanical Engineering, 16(2) (2009) 168–176.
Mesquita and M. P. Kamat, Optimization of stiffened laminated composite plates with frequency constraints, Engineering Optimization, 11(1–2) (1987) 77–88.
G. Sun and R. Mao, Optimization of stiffened laminatedcomposite circular-cylindrical shells for buckling, Composite Structures, 23(1) (1993) 53–60.
M. Seibel, B. Geier, R. Zimmermann and H. Eschenauer, Optimization and experimental investigations of stiffened, axially compressed CFRP-panels, Structural and Multidisciplinary Optimization, 15(2) (1998) 124–131.
J. L. Marcelin, Genetic optimization of stiffened plates and shells, International Journal for Numerical Methods in Engineering, 51(9) (2001) 1079–1088.
N. D. Lagaros, M. Fragiadakis and M. Papadrakakis, Optimum design of shell structures with stiffening beams, AIAA Journal, 42(1) (2004).
M. Kegl and B. Brank, Shape optimization of trussstiffened shell structures with variable thickness, Computer Methods in Applied Mechanics and Engineering, 195(19–22) (2006) 2611–2634.
K. Jarmai, Single- and multi-objective optimization of a welded stringer-stiffened cylindrical shell, Periodica Polytechnica, 51(2) (2007) 11–18.
A. E. H. Love, A treatise on the mathematical theory of elasticity, Cambridge University Press, fourth edition (1952).
W. Flugge, Stresses in shells, Springer, Berlin, Germany (1962).
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper was recommended for publication in revised form by Editor Maenghyo Cho
Mohammad Azadi received his B.S. in Mechanical Engineering from Shiraz University, Iran, in 2006. He then earned his M.S. from K.N. Toosi University of Technology in 2008. He is currently a Ph.D candidate at Sharif University of Technology. His research interests include NVH, Composites, FGMs, FEM, automotive engineering (especially engines and vehicle structure), TBC, and fatigue (HCF, LCF, and TMF).
Rights and permissions
About this article
Cite this article
Mehrabani, M.M., Jafari, A.A. & Azadi, M. Multidisciplinary optimization of a stiffened shell by genetic algorithm. J Mech Sci Technol 26, 517–530 (2012). https://doi.org/10.1007/s12206-011-0912-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-011-0912-z