Abstract
Veterinary medicine has undergone a rapid increase in specialization over the last three decades. Veterinarians now routinely perform joint replacement, neurosurgery, limb-sparing surgery, interventional radiology, radiation therapy, and other complex medical procedures. Many procedures involve advanced imaging and surgical planning. Evidence-based medicine has also become part of the modus operandi of veterinary clinicians. Modeling and additive manufacturing can provide individualized or customized therapeutic solutions to support the management of companion animals with complex medical problems. The use of metal additive manufacturing is increasing in veterinary orthopedic surgery. This review describes and discusses current and potential applications of metal additive manufacturing in veterinary orthopedic surgery.
Similar content being viewed by others
References
S. Ohlerth, A. Busato, M. Rauch, U. Weber, and J. Lang, J. Small Animal Pract. 44, 524 (2003).
P.L. Schmidt, Vet. Clin. N. Am. Small Animal Pract. 37, 409 (2007).
I. Robertson, Clin. Tech. Small Animal Pract. 22, 138 (2007).
K.L. Fitzwater, D.J. Marcellin-Little, O.L.A. Harrysson, J.A. Osborne, and E.C. Poindexter, Am. J. Vet. Res. 72, 1178 (2011).
A.M. Hespel, R. Wilhite, and J. Hudson, Vet. Radiol. Ultrasound 55, 347 (2014).
C.S. Osmond, D.J. Marcellin-Little, O.L. Harrysson, and L.B. Kidd, Vet. Radiol. Ultrasound 47, 136 (2006).
D.J. Marcellin-Little, O.L.A. Harrysson, and O. Cansizoglu, Am. J. Vet. Res. 69, 961 (2008).
D.J. Marcellin-Little, B.J. Sutherland, O.L.A. Harrysson, and E.S. Lee, Am. J. Vet. Res. 71, 1508 (2010).
D.J. Marcellin-Little and O.L.A. Harrysson, Advances in Small Animal Total Joint Replacement, ed. J.N. Peck and D.J. Marcellin-Little (Ames, IA: Wiley, 2012), pp. 223–241.
D.J. Marcellin-Little, O. Cansizoglu, O.L.A. Harrysson, and S.C. Roe, Am. J. Vet. Res. 71, 1089 (2010).
O.L.A. Harrysson, O. Cansizoglu, D.J. Marcellin-Little, D.R. Cormier, and H.A. West II, Mater. Sci. Eng. C 28, 366 (2008).
W.D. Liska, D.J. Marcellin-Little, E.V. Eskelinen, C.G. Sidebotham, O.L.A. Harrysson, and A.K. Hielm-Bjorkman, Vet. Surg. 36, 293 (2007).
T. Sparrow, N. Fitzpatrick, J. Meswania, and G. Blunn, Vet. Comp. Orthop. Traumatol. 27, 243 (2014).
B. Schollhorn, A. Burki, C. Stahl, J. Howard, and F. Forterre, Vet. Surg. 42, 825 (2013).
O.L.A. Harrysson, D.R. Cormier, D.J. Marcellin-Little, and K. Jajal, Rapid Prototyp. J. 9, 37 (2003).
T.W. Kwan, D.J. Marcellin-Little, and O.L. Harrysson, Vet. Surg. 43, 316 (2014).
D.I. Dismukes, D.B. Fox, J.L. Tomlinson, and S.C. Essman, J. Am. Vet. Med. Assoc. 232, 68 (2008).
K.R. Crosse and A.J. Worth, Vet. Comp. Orthop. Traumatol. 23, 354 (2010).
B.E. Hildreth, D.J. Marcellin-Little, S.C. Roe, and O.L.A. Harrysson, Am. J. Vet. Res. 67, 693 (2006).
V.K. Popov, A.V. Evseev, A.L. Ivanov, V.V. Roginski, A.I. Volozhin, and S.M. Howdle, J. Mater. Sci. Mater. Med. 15, 123 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Harrysson, O.L.A., Marcellin-Little, D.J. & Horn, T.J. Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery. JOM 67, 647–654 (2015). https://doi.org/10.1007/s11837-015-1295-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-015-1295-x