Abstract
Process design and optimization methodology for high pressure membrane removal of CO2 from natural gas was developed. An approximate model based on plasticization pressure and permeability parameters at plasticization was proposed for quick evaluation of membrane materials for the high pressure operation. The model was derived by applying the partial immobilization assumption to the fundamental model of solution - diffusion mechanism along with a modified upper-bound curve. About ninety membranes obtained from literature were used to illustrate this methodology. The best three were selected for detailed process modeling and optimization. Process optimization was achieved via non-linear programming constraint optimization model. Gas processing cost was used as the objective function, while plasticization pressure and the CO2 concentration in the feed were used as the constraints. Membrane of 6FDA-durene had the lowest annual gas processing cost while 6FDA-DAM : DABA 2 : 1 had the highest optimum product purity.
Similar content being viewed by others
References
T. M. Murphy, G. T. Offord and D. R. Paul, In Membrane Operations. Innovative Separations and Transformations; Drioli, E., Giorno, L., Eds., WILEY-VCH Verlag GmbH & Co. KGaA: Weinheim (2009).
W. B. Baker, J. Membr., 362, 134 (2010).
L. Giorno, G. De Luca, A. Figoli, E. Piacentini and E. Drioli, In Membrane Operations, Wiley-VCH Verlag GmbH & Co. KGaA (2009).
A. Criscuoli, In Membrane Operations, Wiley-VCH Verlag GmbH & Co. KGaA (2009).
R. T. Adams, J. S. Lee, T. H. Bae, J. K. Ward, J. R. Johnson, C. W. Jones, S. Nair and W. J. Koros, J. Membr. Sci., 367, 197 (2011).
A. L. Ahmad, J. K. Adewole, C. P. Leo, S. Ismail, A. S. Sultan and S. O. Olatunji, J. Membr. Sci., 480, 39 (2015).
Y. Xiao, B. T. Low, S. S. Hosseini, T. S. Chung and D. R. Paul, Progress in Polymer Science, 34, 561 (2009).
J. K. Adewole, A. L. Ahmad, S. Ismail and C. P. Leo, Int. J. Greenh. Gas. Con., 17, 46 (2013).
C. A. Scholes, G. Q. Chen, G. W. Stevens and S. E. Kentish, J. Membr. Sci., 346, 208 (2010).
T.-S. Chung, C. Cao and R. Wang, J. Polym. Sci., Part B: Polym. Phys., 42, 354 (2004).
R. Spillman, In Membrane Science and Technology, Richard, D. N., Stern, S. A., Eds., Elsevier (1995).
B. D. Bhide and S. A. Stern, J. Membr. Sci., 81, 209 (1993).
R. Qi and M. A. Henson, J. Membr. Sci., 121, 11 (1996).
R. Qi and M. A. Henson, Sep. Purif. Technol., 13, 209 (1998).
J. Hao, P. A. Rice and S. A. Stern, J. Membr. Sci., 320, 108 (2008).
J. Hao, P. A. Rice and S. A. Stern, J. Membr. Sci., 209, 177 (2002).
A. K. Datta and P. K. Sen, J. Membr. Sci., 283, 291 (2006).
D. Yang, Z. Wang, J. Wang and S. Wang, Ind. Eng. Chem. Res., 48, 9013 (2009).
M. Safari, A. Ghanizadeh and M. M. Montazer-Rahmati, Int. J. Greenh. Gas. Con., 3, 3 (2009).
F. Ahmad, K. K. Lau, A. M. Shariff and G. Murshid, Comput. Chem. Eng., 36, 119 (2012).
L. Peters, A. Hussain, M. Follmann, T. Melin and M. B. Hagg, Chem. Eng. J., 172, 952 (2011).
A. Bos, I. G. M. Pünt, M. Wessling and H. Strathmann, J. Membr. Sci., 155, 67 (1999).
B. D. Bhide and S. A. Stern, J. Membr. Sci., 62, 13 (1991).
J. Vaughn and W. J. Koros, Macromolecules, 45, 7036 (2012).
A. Bos, I. G. M. Pünt, M. Wessling and H. Strathmann, J. Polym. Sci., Part B: Polym. Phys., 36, 1547 (1998).
J. G. Wijmans and R. W. Baker, J. Membr. Sci., 107, 1 (1995).
B. Flaconnèche, J. Martin and M. H. Klopffer, Oil Gas Sci. Technol.- Rev. IFP, 56, 245 (2001).
A. L. Ahmad, J. K. Adewole, S. B. Ismail, L. C. Peng and A. S. Sultan, Defect Diffus Forum, 333, 135 (2013).
W. R. Vieth, Diffusion In Model and Through Polymers, Hanser Publishers, New York (1991).
W. J. Koros, D. R. Paul and A. A. Rocha, J. Polym. Sci., Part B: Polym. Phys., 14, 687 (1976).
D. R. Paul and W. J. Koros, J. Polym. Sci., Part B: Polym. Phys., 14, 675 (1976).
M. H. Klopffer and B. Flaconnèche, Oil Gas Sci. Technol.- Rev. IFP, 56, 223 (2001).
J. S. McHattie, W. J. Koros and D. R. Paul, Polymer, 32, 2618 (1991).
J. S. McHattie, W. J. Koros and D. R. Paul, Polymer, 32, 840 (1991).
J. S. McHattie, W. J. Koros and D. R. Paul, Polymer, 33, 1701 (1992).
A. Y. Houde, S. S. Kulkarni and M. G. Kulkarni, J. Membr. Sci., 95, 147 (1994).
K. M. P. Kamps, H. A. Teunis, M. Wessling and C. A. Smolders, J. Membr. Sci., 74, 193 (1992).
H. Kumazawa, J. S. Wang, T. Fukuda and E. Sada, J. Membr. Sci., 93, 53 (1994).
R. Srinivasan, S. R. Auvil and P. M. Burban, J. Membr. Sci., 86, 67 (1994).
R. Wang, S. L. Liu, T. T. Lin and T. S. Chung, Chem. Eng. Sci., 57, 967 (2002).
S. A. Stern and V. Saxena, J. Membr. Sci., 7, 47 (1980).
A. Bos, I. G. M. Pünt, M. Wessling and H. Strathmann, Sep. Purif. Technol., 14, 27 (1998).
W.-H. Lin and T.-S. Chunga, J. Membr. Sci., 186, 183 (2001).
X. Chen, D. Rodrigue and S. Kaliaguine, Sep. Purif. Technol., 86, 221 (2012).
B. Kraftschik, W. J. Koros, J. R. Johnson and O. Karvan, J. Membr. Sci., 428, 608 (2013).
J. D. Wind, S. M. Sirard, D. R. Paul, P. F. Green, K. P. Johnston and W. J. Koros, Macromolecules, 36, 6433 (2003).
J. M. Mohr, D. R. Paul, G. L. Tullos and P. E. Cassidy, Polymer, 32, 13, 2387 (1991).
A. Bos, I. G. M. Pünt, M. Wessling and H. Strathmann, J. Membr. Sci., 155, 67 (1999).
A. Bos, I. G. M. Pünt, M. Wessling and H. Strathmann, Sep. Purif. Technol., 14, 27 (1998).
A. Y. Houde, B. Krishnakumar, S. G. Charati and S. A. Stern, J. Appl. Polym. Sci., 62, 2181 (1996).
M. R. Pixton and D. R. Paul, Polymer, 36, 3165 (1995).
A. M. Kratochvil and W. J. Koros, Macromolecules, 41, 7920 (2008).
J. D. Wind, S. M. Sirard, D. R. Paul, P. F. Green, K. P. Johnston and W. J. Koros, Macromolecules, 36, 6442 (2003).
H. Kumazawa, K. Inamori, B. Messaoudi and E. Sada, J. Membr. Sci., 97, 7 (1994).
R. T. Chern, F. R. Sheu, L. Jia, V. T. Stannett and H. B. Hopfenberg, J. Membr. Sci., 35, 103 (1987).
T. Nakagawa, T. Nishimura and A. Higuchi, J. Membr. Sci., 206, 149 (2002).
L. Zhang, Y. Xiao, T. S. Chung and J. Jiang, Polymer, 51, 4439 (2010).
F. A. Ruiz-Treviño and D. R. Paul, J. Appl. Polym. Sci., 68, 403 (1998).
W. Qiu, C.-C. Chen, L. Xu, L. Cui, D. R. Paul and W. J. Koros, Macromolecules, 44, 6046 (2011).
A. L. Khan, X. Li and I. F. J. Vankelecom, J. Membr. Sci., 372, 87 (2011).
P. S. Tin, T. S. Chung, Y. Liu, R. Wang, S. L. Liu and K. P. Pramoda, J. Membr. Sci., 225, 77 (2003).
A. M. W. Hillock and W. J. Koros, Macromolecules, 40, 583 (2007).
C. E. Powell, X. J. Duthie, S. E. Kentish, G. G. Qiao and G. W. Stevens, J. Membr. Sci., 291, 199 (2007).
B. T. Low, T. S. Chung, H. Chen, Y.-C. Jean and K. P. Pramoda, Macromolecules, 42, 7042 (2009).
M. J. Reimers and T. A. Barbari, J. Polym. Sci. Part B: Polym. Phys., 32, 131 (1994).
C.-C. Hu, Y.-J. Fu, K.-R. Lee, R.-C. Ruaan and J.-Y. Lai, Polymer, 50, 5308 (2009).
L. M. Robeson, J. Membr. Sci., 62, 165 (1991).
B. D. Freeman, Macromolecules, 32, 375 (1999).
L. M. Robeson, H. H. Hwu and J. E. McGrath, J. Membr. Sci., 302, 70 (2007).
L. M. Robeson, J. Membr. Sci., 320, 390 (2008).
A. Y. Alentiev and Y. P. Yampolskii, J. Membr. Sci., 165, 201 (2000).
B. W. Rowe, L. M. Robeson, B. D. Freeman and D. R. Paul, J. Membr. Sci., 360, 58 (2010).
L. M. Robeson, Z. P. Smith, B. D. Freeman and D. R. Paul, J. Membr. Sci., 453, 71 (2014).
S. Kanehashi, T. Nakagawa, K. Nagai, X. Duthie, S. Kentish and G. Stevens, J. Membr. Sci., 298, 147 (2007).
J. D. Wind, S. M. Sirard, D. R. Paul, P. F. Green, K. P. Johnston and W. J. Koros, Macromolecules, 36, 6433 (2003).
R. W. Baker, In Membrane Technology and Applications, John Wiley & Sons, Ltd. (2004).
L. Peters, A. Hussain, M. Follmann, T. Melin and M. B. Hägg, Chem. Eng. J., 172, 952 (2011).
A. Bos, I. G. M. Pünt, M. Wessling and H. Strathmann, J. Polym. Sci., Part B: Polym. Phys., 36, 1547 (1998).
T. F. Edgar, D. M. Himmelblau and L. S. Lasdon, Optimization of Chemical Processes, McGraw-Hill, New York (2001).
S. S. Rao and S. S. Rao, Engineering Optimization: Theory and Practice, John Wiley & Sons, New Jersey (2009).
J. K. Adewole, A. L. Ahmad, A. S. Sultan, S. Ismail and C. P. Leo, J. Polym. Res., 22, 1 (2015).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Adewole, J.K., Ahmad, A.L. Process modeling and optimization studies of high pressure membrane separation of CO2 from natural gas. Korean J. Chem. Eng. 33, 2998–3010 (2016). https://doi.org/10.1007/s11814-016-0165-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-016-0165-8