Abstract
The disposal of fly ash has become a serious problem in China due to its rapid increase in volume in recent years. The most common method of fly ash disposal is solidification-stabilization-landfill, and the most common reuse is low-value-added building materials. A novel processing method for preparing ultra-lightweight ceramsite with fly ash was developed. The results show that the optimal parameters for preparation of ultra-lightweight ceramsite are as follows: mass ratio of fly ash:kaolin: diatomite =80:15:5, preheating temperature of 800C, preheating time of 5 min, sintering temperature of 1220°C, and sintering time of 10 min. The expansion agent is perlite, at 10 wt.% addition. Finally, a ceramsite with bulk density of 340 kg/m, particle density of 0.68 g/cm3, and cylinder compressive strength of 1.02 MPa was obtained. Because of its low density and high porosity, ultra-lightweight ceramsite has excellent thermal insulation performance, and its strength is generally low, so it is usually used in the production of thermal insulation concrete and its products. The formation of a liquid-phase component on the surface, and generation of a gas phase inside ceramsite during the sintering process, make it possible to control the production of the suitable liquid phase and gas in this system, resulting in an optimization of the expansion behavior and microstructure of ceramsite. These characteristics show the feasibility of industrial applications of fly ash for the production of ultra-lightweight ceramsite, which could not only produce economic benefits, but also conserve land resources and protect the environment.
Similar content being viewed by others
References
Ahmaruzzaman M (2010). A review on the utilization of fly ash. Progress in Energy and Combustion Science, 36(3): 327–363
Basu M, Pande M, Bhadoria PBS, Mahapatra S C (2009). Potential fly-ash utilization in agriculture: A global review. Progress in Natural Science, 19(10): 1173–1186
Chandra S, Berntsson L (2002). Lightweight Aggregate Concrete. New York: William Andrew Publishing, 21–65
Cheng G, Li Q H, Su Z, Sheng S, Fu J (2018). Preparation, optimization, and application of sustainable ceramsite substrate from coal fly ash/ waterworks sludge/oyster shell for phosphorus immobilization in constructed wetlands. Journal of Cleaner Production, 175: 572–581
Çiçek T, Çinçin Y (2015). Use of fly ash in production of light-weight building bricks. Construction & Building Materials, 94: 521–527
Dimte S, Rukavina T (2007). Use of Industrial By-Products in Road Construction: Environmental Effects of Fly Ash. Pre-Proceedings of the 23rd PIARC World Road Congress, Paris, France, 851–859
Dindi A, Quang D V, Vega L F, Nashef E, Abu-Zahra M R M (2019). Applications of fly ash for CO2 capture, utilization, and storage. Journal of CO2 Utilization, 29: 82–102
Ding J, Ma S H, Shen S, Xie Z L, Zheng S L, Zhang Y (2017). Research and industrialization progress of recovering alumina from fly ash: A concise review. Waste Management (New York, N.Y), 60: 375–387
Han R B, Xu Z M, Qing Y T (2017). Study on the material performance of ceramsite concrete roof brick. Procedia Engineering, 205: 642–649
Hidayat T, Shishin D, Decterov S A, Jak E (2017). Experimental study and thermodynamic re-optimization of the FeO-Fe2O3-SiO2 system. Journal of Phase Equilibria and Diffusion, 38(4): 1–16
Jing Q X, Wang Y Y, Chai L Y, Tang C J, Huang X D, Guo H, Wang W, You W (2018). Adsorption of copper ions on porous ceramsite prepared by diatomite and tungsten residue. Transactions of Nonferrous Metals Society of China, 28(5): 1053–1060
Jo B W, Park S K, Park J B (2007). Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA). Cement and Concrete Composites, 29(2): 128–135
Karoly Z, Mohai I, Tóth M, Wéber F, Szépvölgyi J (2007). Production of glass-ceramics from fly ash using arc plasma. Journal of the European Ceramic Society, 27(2–3): 1721–1725
Kayali O (2008). Fly ash lightweight aggregates in high performance concrete. Construction & Building Materials, 22(12): 2393–2399
Kumar K, Kumar S, Gupta M, Garg H C (2017). Characteristics of fly ash in relation of soil amendment. Materials Today: Proceedings, 4(2, Part A): 527–532
Li J, Yu G W, Xie S Y, Pan L J, Li C X, You F T, Wang Y (2018). Immobilization of heavy metals in ceramsite produced from sewage sludge biochar. Science of the Total Environment, 628-629: 131–140
Liu Z Y, Yue Y, Lu M, Zhang J, Sun F C, Huang X, Zhou J Z, Qian G R (2019). Comprehension of heavy metal stability in municipal solid waste incineration fly ash with its compositional variety: A quick prediction case of leaching potential. Waste Management (New York, N.Y), 84: 329–339
Lorenzo M P, Goni S, Guerrero A (2003). Role of aluminous component of fly ash on the durability of Portland cement-fly ash paste's in marine environment. Waste Management (New York, N.Y), 23(8): 785–792
Mays G C, Barnes R A (1991). Performance of lightweight aggregate concrete structures in service. Structural Engineer (London), 69: 351–361
Mohapatra R, Rao J R (2001). Some aspects of characterisaton, utilisation and environmental effects of fly ash. Journal of Chemical Technology and Biotechnology (Oxford, Oxfordshire), 76(1): 9–26
Mwamulima T, Zhang X L, Wang Y M, Song S X, Peng C S (2018). Novel approach to control adsorbent aggregation: Iron fixed bentonite-fly ash for Lead (Pb) and Cadmium (Cd) removal from aqueous media. Frontiers of Environmental Science & Engineering, 12(2): 2
Piszcz-Karas K, Klein M, Hupka J, Luczak J (2019). Utilization of shale cuttings in production of lightweight aggregates. Journal of Environmental Management, 231: 232–240
Qi Y F, Dai B B, He S B, Wu S Q, Huang J C, Xi F, Ma Y C, Meng M (2016). Effect of chemical constituents of oxytetracycline mycelia residue and dredged sediments on characteristics of ultra-lightweight ceramsite. Journal of the Taiwan Institute of Chemical Engineers, 65: 225–232
Qin J, Cui C, Cui X Y, Hussain A, Yang C M (2015). Preparation and characterization of ceramsite from lime mud and coal fly ash. Construction & Building Materials, 95: 10–17
Riley C M (1951). Relation of Chemical Properties to the Bloating of Clays. Journal of the American Ceramic Society, 34(4): 121–128
Sivalingam S, Kella T, Maharana M, Sen S (2019). Efficient sono-sorptive elimination of methylene blue by fly ash-derived nano-zeolite X: Process optimization, isotherm and kinetic studies. Journal of Cleaner Production, 208: 1241–1254
Sun L Y, Luo K, Fan J R, Lu H L (2017). Experimental study of extracting alumina from coal fly ash using fluidized beds at high temperature. Fuel, 199: 22–27
Zhipeng T, Bingru Z, Chengjun H, Rongzhi T, Huangpu Z, Fengting L (2015). The physiochemical properties and heavy metal pollution of fly ash from municipal solid waste incineration. Process Safety and Environmental Protection, 98: 333–341
Wang C, Chen X-X, Dang C, Li Y-Z, Aruna H-C, Li Y, Huang (2016). Preparation of ceramsite from C&D waste and Baiyunebo tailings. Procedia Environmental Sciences, 31: 211–217
Wu H Q, Zhang T, Pan R J, Chun Y Y, Zhou H M, Zhu W X, Peng H Z, Zhang Q (2018). Sintering-free preparation of porous ceramsite using low-temperature decomposing pore former and its sound-absorbing performance. Construction & Building Materials, 171: 367–376
Zhang B P, Chen Y L, Wei L, Zu Z N (2012). Preparation of molecular sieve X from coal fly ash for the adsorption of volatile organic compounds. Microporous and Mesoporous Materials, 156: 36–39
Zimmer A, Bergmann C P (2007). Fly ash of mineral coal as ceramic tiles raw material. Waste Management (New York, N.Y), 27(1): 59–68
Acknowledgments
The authors gratefully acknowledge the financial support by the National Natural Science Foundation of China (Nos. 51804342 and 51874356), the Collaborative Innovation Center for Clean and Efficient Utilization of Strategic Metal Mineral Resources, and the Scientific Research Starting Foundation of Central South University (No. 218041).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Highlights
• Ultra-lightweight ceramsite is prepared with 80% fly ash.
• SiO2, Al2O3, and flux contents significantly influence the performance of ceramsite.
• The expansion of ceramsite is caused by the formation of a dense glaze and gas.
• The bulk density of ultra-lightweight ceramsite is only 340 kg/m3.
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Liu, S., Yang, C., Liu, W. et al. A novel approach to preparing ultra-lightweight ceramsite with a large amount of fly ash. Front. Environ. Sci. Eng. 14, 62 (2020). https://doi.org/10.1007/s11783-020-1241-1
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11783-020-1241-1