Abstract
In the present study, microstructural evolutions of AE42 magnesium alloy via strain-induced melt activation process and the effect of different process parameters are studied. Scanning electron microscope, metallographic observations, and quantitative metallographic method were used for microstructural characterization. The results show that the consumption of supersaturated aluminum during partial remelting led to a decrease in Al/RE ratio and consequently blocky shape Al2RE starts to appear in the microstructure. Furthermore, it was seen that lanthanum and praseodymium did not contribute in precipitate formation and only improved the hardness of the matrix. The effect of compression ratio on the microstructure of treated alloys was confirmed through the increase of both liquid fraction and entrapped pool as well as the kinetic of microstructural changes. Moreover, the effect of compression ratio and holding time on shape factor, liquid fraction, and particle size of the globular structure were measured. It was found that the best result could be achieved at 35% deformation and 40 min holding of the samples at 610 °C.
Similar content being viewed by others
References
E. Tzimas and A. Zavaliangos, Evolution of Near-Equiaxed Microstructure in the Semisolid State, Mater. Sci. Eng., 2000, A289, p 228–240
H.Q. Lin, J.G. Wang, H.Y. Wang, and Q.C. Jiang, Effect of Predeformation on the Globular Grains an AZ91D Alloy During Strain Induced Melt Activation (SIMA) Process, J. Alloys Compd., 2007, 431, p 141–147
R.A. Martinez and M.C. Flemings, Evolution of Particle Morphology in Semisolid Processing, Metall. Mater. Trans. A, 2005, 36, p 2205–2210
Z. Fan, Semisolid Metal Processing, Int. Mater. Rev., 2002, 47, p 49–85
J.A. Yurko, R.A. Martinez, and M.C. Flemings, SSR™: The Spheroidal Growth Route to Semi-solid Forming, 8th Conference on Semisolid Processing, September 21-24, 2004, Limassol, Cyprus
S.G. Bergsma, U.S. Patent 5,571,346, 1996
K.P. Young Ballwin and C. P. Kyunka, Meryland Heights, James A. Courtois, Florissant, US Patent No. 4415374
Y. Fuxiao, C. Jianzhong, S. Ranganathan, and E.S. Dwarakadasa, Fundamental Differences Between Spray Forming and Other Semisolid Processes, Mater. Sci. Eng., 2001, A304, p 621–626
H.E. Friedrich and B.L. Mordike, Magnesium Technology Metallurgy, Design Data, Application, Springer, Berlin, 2006
E.A. Vieira, A.M. Kliauga, and M. Ferrante, On the Formation of Spheroidal Microstructures in a Semi-solid Al-Si Alloy by Thermomechanical Processing, Scripta Mater., 2007, 57, p 1165–1168
H.E. Friedrich and B.L. Mordike, Magnesium Technology Metallurgy, Design Data, Application, Springer, Berlin, 2000
B. Nami, S.G. Shabestaria, S.M. Miresmaeili, H. Razavi, and Sh Mirdamadi, The Effect of Rare Earth Elements on the Kinetics of the Isothermal Coarsening of the Globular Solid Phase in Semisolid AZ91 Alloy Produced Via SIMA Process, J. Alloys Compd., 2009, 489, p 570–575
M.J. Nayyeri and F. Khomamizadeh, Effect of RE Elements on the Microstructural Evolution of As Cast and SIMA Processed Mg-4Al alloy, J. Alloys Compd., 2011, 509, p 1567–1572
S. Luo, Q. Chen, and Z. Zhao, Effects of Processing Parameters on the Microstructure of ECAE-Formed AZ91D Magnesium Alloy in the Semi-solid State, J. Alloys Compd., 2009, 477, p 602–607
T. Rzychoń, A. Kiełbus, and G. Dercz, Structural and Quantitative Analysis of Die Cast AE44 Magnesium Alloy, J. Achiev. Mater. Manuf. Eng., 2007, 22, p 43–46
T. Rzychoń and A. Kiełbus, Effect of Rare Earth Elements on the Microstructure of Mg-Al Alloys, J. Achiev. Mater. Manuf. Eng., 2006, 17, p 149–152
G. Pettersen, H. Westengen, R. Hoier, and O. Lohne, Microstructure of a Pressure Die Cast Magnesium—4 wt.% Aluminium Alloy Modified with Rare Earth Additions, Mater. Sci. Eng., 1996, A207, p 115–120
B.R. Powell, V. Rezhets, M.P. Balogh, and R.A. Waldo, Microstructure and Creep Behavior in AE42 Magnesium Die-Casting Alloy, J. Met., 2002, 54, p 34–38
M.S. Dargusch, S.M. Zhu, J.F. Nie, and G.L. Dunlop, Microstructural Analysis of the Improved Creep Resistance of a Die-Cast Magnesium-Aluminum-Rare Earth Alloy by Strontium Additions, Scripta Mater., 2008, 60, p 116–119
Y. Lu, Q. Wang, X. Zeng, W. Ding, C. Zhai, and Y. Zhu, Effect of Rare Earths on the Microstructure, Properties and Fracture Behavior of Mg-Al Alloys, Mater. Sci. Eng., 2000, A278, p 66–76
Q.Q. Zhang, Z.Y. Cao, Y.F. Zhang, G.H. Su, and Y.B. Liu, Effect of Compression Ratio on the Microstructure Evolution of Semisolid AZ91D Alloy, J. Mater. Process. Technol., 2007, 184, p 195–200
H. Arami, R. Khalifehzadeh, Hamed Keyvan, and F. Khomamizadeh, Effect of Predeformation and Heat Treatment Conditions in the SIMA Process on Microstructural and Mechanical Properties of A319 Aluminum Alloy, J. Alloys Compd., 2009, 468, p 130–135
J.G. Wang, H.Q. Lin, H.Y. Wang, and Q.C. Jiang, Effects of Different Processing Parameters on the Semisolid Microstructure of the AZ91D Alloy During Partial Remelting, J. Alloys Compd., 2007, 466, p 98–105
L. Zhang, Y.B. Liu, Z.Y. Cao, Y.F. Zhang, and Q.Q. Zhang, Effects of Isothermal Process Parameters on the Microstructure of Semisolid AZ91D Alloy Produced by SIMA, J. Mater. Process. Technol., 2009, 209, p 792–797
S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, and T.B. Abbott, Microstructural Analysis of the Creep Resistance of Die-Cast Mg-4Al-2RE Alloy, Scripta Mater., 2008, 58, p 477–480
Q.Q. Zhang, Z.Y. Caoa, Y.B. Liu, Y.F. Zhang, L. Zhang, M. Zhang, and R. Wu, Effect of Asymmetrical Deformation on the Microstructure Evolution of Semisolid AZ91 Alloy, Mater. Sci. Eng., 2008, A488, p 260–265
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nayyeri, M.J., Dehghani, K. Microstructure Evolution in As-Cast and SIMA-Processed AE42 Magnesium Alloy. J. of Materi Eng and Perform 23, 3077–3084 (2014). https://doi.org/10.1007/s11665-014-1080-y
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-014-1080-y