Abstract
The effects of suspended solid lubricant (graphite and/or talc) particles in oil on the sliding wear response of a cast iron have been studied in this investigation. The role played by the changing concentration of the talc and graphite particles added to the oil separately as well as in combination toward controlling the wear behavior of the cast iron has also been analyzed. The investigation strongly suggests beneficial effects of the solid lubricant particles suspended in lubricating oil in terms of decreasing wear rate, frictional heating, and friction coefficient. Interestingly, increasing concentration of the suspended lubricant particles in oil led to reduction in the mentioned properties initially followed by the attainment of the minimum at a specific concentration of the solid lubricants. At still higher concentrations, the trend reversed in the case of wear rate and friction coefficient while it remained unaffected as far as the influence on frictional heating is concerned. Formation of stable lubricating film/layer was noted to be responsible for the improved wear performance of the samples while rupture of the lubricant film led to deterioration in wear behavior.
Similar content being viewed by others
References
T.S. Eyre, Friction and Wear of Cast Irons, Metals Handbook: Friction, Lubrication and Wear Technology, Vol. 18, 10th ed., ASM, Materials Park, Ohio, USA, 1992, p 695–701
C.V. White, Gray Iron, Metals Handbook: Properties and Selection: Irons, Steels and High Performance Materials, Vol. 1, 10th ed., ASM, Materials Park, Ohio, USA, 1990, p 12–32
Y. Zhang, Y. Chen, R. He and B. Shen, Investigation of Tribological Properties of Brake Shoe Materials—Phosphorous Cast Irons with Different Graphite Morphologies, Wear, 166(1993)179-186.
B. Bhushan and B.K. Gupta, Ed., Solid Lubricants and Self-Lubricating Solids, Handbook of Tribology, Chap. 5, McGraw Hill Inc., USA, 1991, p 5.1–5.86
R.H. Boehringer, Grease, Metals Handbook: Friction, Lubrication and Wear Technology, Vol. 18, 10th ed., ASM, Materials Park, Ohio, USA, 1992, p 123–131
M. Yazun, Z. Wancheng, L. Shengna, J. Yuansheng, W. Yuscong and T.C. Simon, Tribological performance of three advanced piston rings in the presence of MoDTC-modified GF-3 oils, Tribo. Lett., 18(2005)75-83.
S.Q.A. Rizvi, Lubricant Additives and Their Functions, Metals Handbook: Friction, Lubrication and Wear Technology, Vol. 18, 10th ed., ASM, Materials Park, Ohio, USA, 1992, p 98–112
P.K.D. Poddar and M. Chaudhuri, Natural Minerals, Handbook of Ceramics, Chap. 2, S. Kumar, Ed., Kumar and Associates Publishers, Calcutta, 1994, p 53–104
Y. Lakhtin, Crystal Structure of Metals, Engineering Physical Metallurgy, 1st ed., Chap. 1, Mir Publishers, Moscow, 1963, p 11–24
F.P. Bowden and J.E. Young, Proc. R. Soc. Lond., 208(1951)444–455.
P.J. Bryant, P.L. Gutshall and L.H. Taylor, A study of mechanisms of graphite friction and wear, Wear 7(1964)118–126.
R.H. Savage, Lubrication, 19(1948)1–10.
H.E. Sliney, Solid Lubricants, Metals Handbook: Friction, Lubrication and Wear Technology, Vol. 18, 10th ed., ASM, Materials Park, Ohio, USA, 1992, p 113–122
J.L. Bolles and E.J. McCullough, Minerals and Their Properties, SME Mineral Processing Handbook, Vol. I, Section 2, N.L. Weiss, Ed., Society of Mining Engineers of American Institute of Mining, Metallurgical and Petroleum Engineers Inc., NY, USA, 1985, p 2.1-2.17
J.A. Radosta and N.C. Trivedi, Talc, Handbook of Fillers and Reinforcements for Plastics, Chap. 2, H.S. Kartz and V. Milewski, Ed., Van Hastrand Reinhold Publishers, NY, 1978, p 160-171
A.K. Jha, T.K. Dan, S.V. Prasad and P.K. Rohatgi, Aluminium alloy-solid lubricant talc particle composites, J. Mater. Sci., 21(1986)3681-3685.
J Ribet, K. Poret, D. Arsequel, D. Chulia and Rodriguez, Talc functionalty as lubricant: texture, mean diameter and specific area influence, Drug Dev. Ind. Pharm., 29(2003)1127-1135.
M.V. Rayiko and N.F. Dmytrychenko, Some aspects of boundary lubrication in the local contact of friction surfaces, Wear, 126(1988)69-78.
Y. Liu, P.K. Rohatgi and S. Ray, Tribological Characteristics of Aluminium-50 vol pct Graphite Composites, Metall. Trans. A, 24A(1993)151-158.
B.K. Prasad, Effectiveness of an externally added solid lubricant on the sliding wear response of a zinc–aluminium alloy, its composite and cast iron, Tribo. Lett., 18(2005)135-143.
O.P. Modi, B.K. Prasad, A.H. Yegneswaran and M.L. Vaidya, Dry sliding wear behaviour of squeeze cast aluminium alloy-silicon carbide composites, Mater. Sci. Eng. A, 151A(1992)235-245.
D.A. Rigney, L.H. Chen, M.G.S. Naylor and A.R. Rosenfield, Wear Processes in Sliding Systems, Wear, 100(1984)195-219.
F.E. Kennedy Jr., Thermal and Thermomechanical Effects in Dry Sliding, Wear, 100(1984)453–476.
S.L. Rice, H. Nowotny and S.F. Wayne, Characteristics of Metallic Subsurface Zones in Sliding and Impact Wear, Wear, 74(1981)131-142.
D.A. Rigney and J.P. Hirth, Plastic Deformation and Sliding Friction of Metals, Wear, 53(1979)345-370.
M.A. Moore and R.M. Douthwaite, Plastic Deformation Below Worn Surfaces, Metall. Trans. A, 7A(1976)1833-1838.
P. Clayton and M.B.P. Alley, Metallurgical Aspects of Surface Damage Problems in Rails, Canadian Metall. Qtly., 21(1982)31–46.
O. Scheffler and C. Allen, The Abrasive Wear of Steels in South African Soil , Tribo. Int., 21(1988)127-135.
B.K. Prasad and S.V. Prasad, Abrasion Induced Microstructural Changes During Low Stress Abrasion of a Plain Carbon (0.5% C) Steel , Wear, 151(1991)1-12.
N. Jost and I. Schmidt, Friction induced martensite transformation in austenitic and manganese steels, Wear, 111(1986)377-389.
J. Larsen-Badse and K.G. Mathew, Influence of structure on the abrasion resistance of 1040 steel, Wear, 14(1969)199-205.
B.R. Newcomb and W.M. Stobbs, A transmission electron microscopy study of the white etching layer on a rail head, Mater. Sci. Eng. A, 66(1984)195-204.
L. Fang, Y. Gao, L. Zhou and P. Li, Unlubricated sliding wear of ceramics against graphitized cast irons Wear, 171(1994)129-134.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Prasad, B.K. Lubricated Sliding Wear Behavior of a Cast Iron: Effect of Graphite and/or Talc Fraction in Oil. J. of Materi Eng and Perform 19, 413–420 (2010). https://doi.org/10.1007/s11665-009-9480-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11665-009-9480-0