Abstract
The importance of the services sector can not be overstated; it employs 82.1 percent of the U. S. workforce and 69 percent of graduates from an example technological university. Yet, university research and education have not followed suit. Clearly, services research and education deserve our critical attention and support since services — and services innovation — serve as an indispensable engine for global economic growth. The theme of this paper is that we can and should build services research and education on what has occurred in manufacturing research (especially in regard to customization and intellectual property) and education; indeed, services and manufactured goods become indistinguishable as they are jointly co-produced in real-time. Fortunately, inasmuch as manufacturing concepts, methodologies and technologies have been developed and refined over a long period of time (i.e., since the 1800s), the complementary set of concepts, methodologies and technologies for services are more obvious. However, while new technologies (e.g., the Internet) and globalization trends have served to enable, if not facilitate, services innovation, the same technologies (e.g., the Internet) and 21st Century realities (e.g., terrorism) are making services innovation a far more complex problem and, in fact, may be undermining previous innovations in both services and manufacturing. Finally, there is a need to define a “knowledge-adjusted” GDP metric that can more adequately measure the growing knowledge economy, one driven by intangible ideas and services innovation.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Baumol, W.J., Batey-Blackman, S.A. & Wolff, E.N. (1989). Productivity and American Leadership: the Long View. Cambridge, MA: John Wiley & Sons
Berg, D., Tien, J. M. & Wallace, W. A. (2001). Guest editorial: technology management in the service industry. IEEE Transactions on Engineering Management: Special Cluster, 148(3): 330–332
Berg, D. & Einspruch, N.G. (2004). Data surface mining (DSM): application to economic sector analysis. Proceedings of the International Conference on Service Systems and Service Management, 453–454, Beijing, China, 2004
Berg, D. & Einspruch, N.G. (2006a). Corporate reputation, technology and the economic sectors. Proceedings of the International Association for the Management of Technology, Beijing, China, May 22–26, 2006
Berg, D. & Einspruch, N.G. (2006b). Analyzing corporate innovation using the data surface mining technique. Proceedings of the 3rd IEEE Conference on Management of Innovation and Technology, Singapore, June 21–23, 2006b
Cohen, S. & Zysman, J. (1987). Manufacturing Matters: The Myth of the Post-Industrial Economy. London: Basic Books
Corrado, C., Hulten, C. & Sichel, D. (2005). Intangible Capital and Economic Growth. Baltimore, MD: Federal Reserve Board
Edward, M. & Hallowell, E.M. (2006). CrazyBusy: Overstretched, Overbooked, and about to Snap! Strategies for Coping in a World Gone ADD. New York, NY: Ballantine Books
Friedman, T.L. (2005). The World Is Flat: A Brief History of the Twenty-First Century, New York, NY: Farrar, Strauss & Giroux
Fitzsimmons, J.A. & Fitzsimmons, M.J. (2006). Service Management: Operations, Strategy, and Information Technology. Fifth Edition, New York, NY: McGraw-Hill
Flower, J. (2006). Five-star hospitals. Strategy and Business, 42: 67–77, Spring
Gershenfeld, N.A. (2005). FAB: The Coming Revolution on Your Desktop — From Personal Computers to Personal Fabrication. Boston, MA: Basic Books
Giles, J. (2005). Internet encyclopedias go head to head. Nature, 438(7070): 900–901, December 15, 2005
Organisation for Economic Cooperation and Development (OECD) (2005). Enhancing the Performance of the Service Sector: Promoting Innovation in Services. Paris, France: OECD Publications
Parasuraman, A., Zeithaml, V.A. & Berry, L.L. (1998). Servqual: a multiple item scale for measuring consumer perceptions of service quality. Journal of Retailing, 64(1): 12–40
Pine II, B.J. & Gilmore J.H. (1997). The four faces of mass customization. Harvard Business Review, 75(1): 91–101
Pine II, B.J. & Gilmore, J.H. (1999). The Experience Economy. Boston, MA: Harvard Business School Press
Roush, W. (2006). Inside the spyware scandal. Technology Review, May/June: 49–57
Sheffi, Y. (2005). The Resilient Enterprise: Overcoming Vulnerability for Competitive Advantage. Cambridge, MA: MIT Press
Surowiecki, J. (2005). Technology and happiness. Technology Review, January: 72–76
Tien, J.M. (1986). On automated correctional data systems. Computers, Environment and Urban Systems, 10(3/4): 157–163
Tien, J.M. (2000). Individual-centered education: an any one, any time, any where approach to engineering education. IEEE Transactions on Systems, Man, and Cybernetics, Part C: Special Issue on Systems Engineering Education, 30(2): 213–218
Tien, J.M. (2003). Towards a decision informatics paradigm: A real-time, information-based approach to decision making. IEEE Transactions on Systems, Man, and Cybernetics, Special Issue, Part C, 33(1): 102–113
Tien, J.M. (2005). Viewing urban disruptions from a decision informatics perspective. Journal of Systems Science and Systems Engineering, 14(3): 257–288
Tien, J.M. (September, 2006). Services innovation: decision attributes, innovation enablers, and innovation drivers. In: Cheng Hsu, (eds.), Service Enterprise Integration: An Enterprise System Engineering Perspective, Novell, MA: Springer, forthcoming
Tien, J.M. & Berg, D. (1995). Systems engineering in the growing service economy. IEEE Transactions on Systems, Man, and Cybernetics, 25(5): 321–326
Tien, J.M. and Berg, D. (2003). A case for service systems engineering. Journal of Systems Science and Systems Engineering, 12(1): 13–38
Tien, J.M. & Cahn, M.F. (1981). An Evaluation of the Wilmington Management of Demand Program. Washington, DC: National Institute of Justice
Tien, J.M., Krishnamurthy, A. & Yasar, A. (2004). Towards real-time customized management of supply and demand chains. Journal of Systems Science and Systems Engineering, 13(3): 257–278
U. S. Congress (2005). National Innovation Act. Washington, DC: U. S. Congress S2109/HR4654
von Hippel, E. (2005). Democratizing Innovation, Cambridge, MA: The MIT Press
Wright, B.C. (2002). Business Method Patents: Are There Any Limits. Chicago, IL: The John Marshall Law School
Yasar, A. (2005). Real-time and simultaneous management of supply and demand chains. Dissertation. Troy, NY: Rensselaer Polytechnic Institute
Yasar, A. & Tien, J.M. (2003). A robust dynamic pricing approach that tracks the customer’s imputed valuation. Proceedings of the 2003 IEEE International Conference on Systems, Man & Cybemetics, Washington, DC, 2003
Author information
Authors and Affiliations
Corresponding author
Additional information
James M. TIEN is the Yamada Corporation Professor at Rensselaer Polytechnic Institute. He is also an Honorary Professor at several Chinese Universities and an elected member of the U. S. National Academy of Engineering. He received the BEE from Rensselaer Polytechnic Institute (1966) and the SM, EE and PhD from the Massachusetts Institute of Technology (1967, 1970, 1972). He has held leadership positions at Bell Telephone Laboratories (1966–69), at the Rand Corporation (1970–73), and at Structured Decisions Corporation (1974-Present). His areas of research interest include the development and application of computer and systems analysis techniques to information and decision systems. He has been honored with both teaching and research awards, including being elected Fellow (of IEEE, AAAS, and IN FORMS) and being a recipient of the IEEE/SMC Joseph G. Wohl Outstanding Career Award, the IEEE/SMC Norbert Wiener Award, and the IEEE/EAB Major Educational Innovation Award.
Daniel BERG is an Institute Professor of Science and Technology at Rensselaer Polytechnic Institute (R.P.I.). While at Westinghouse, he was an adjunct Professor of Industrial Administration and Engineering at the Graduate School of Industrial Administration, and Engineering School of Carnegie-Mellon University. He served as Professor of Science and Technology and Dean of Mellon College of Science as well as Provost at Carnegie-Mellon. At R.P.I. he served as Vice President for Academic Affairs, Provost and President. His present research interests concern the role of technology in the service sector. He is acting director of the Center for Services Research and Education at R.P.I. and a member of the National Academy of Engineering. He is a Fellow of AAAS, AIC, IEEE and INFORMS. Dr. Berg is active as a board member for and advisor to many universities, federal agencies, and industrial organizations.
Rights and permissions
About this article
Cite this article
Tien, J.M., Berg, D. On services research and education. J. Syst. Sci. Syst. Eng. 15, 257–283 (2006). https://doi.org/10.1007/s11518-006-5019-1
Issue Date:
DOI: https://doi.org/10.1007/s11518-006-5019-1