Abstract
Population expansion and improving living standards, particularly in developed nations, have led to an increase in the usage of domestic electrical equipment, worldwide energy consumption, and CO2 emissions per capita. To limit the usage of non-reusable components and the amount of garbage that must be transferred at the end of a product’s life cycle, longer-lasting electrical domestic appliances are a pillar of the circular economy. In recent years, the complexity of printed circuit boards (PCBs) used in the manufacture of modern electrical devices has increased, leading to an increase in device failures. This study focuses on the maintenance and recycling of domestic electrical appliance components and printed circuit boards. The proposed methodology for PCB repair is defined as a sequential quadratic programming (SQP) problem implemented in MATLAB environment and successfully tested to a variety of domestic appliances such as refrigerator, dishwasher and washing machine. The possibility of recycling metal parts of electronic components, which were replaced after PCBs’ repair was also studied. Metals’ percentage concentration of PCB electronic components for three customer’s budgets considering metals and valuable metals recovery as given from the corresponding average metal recovery and calculated from different recycling procedures presented in the literature. The results of the proposed procedure in terms of valuable metals gave 38.4078 ppm of silver. We also compared the suggested procedure with other works in terms of environmental perspective considering four measures, namely the gross energy requirement (GER), the global warming potential (GWP), the acidification potential (AP), and the solid waste burden (SWB). In terms of economic perspective and considering the existence of silver (Ag) in the electronic components, the recommended method gave comparable amount of money. Finally, a comparison of different recycling works from a technical viewpoint is also conducted. Moreover, a reparability index of domestic electrical appliances is introduced to further quantify the results of the proposed algorithm.
Similar content being viewed by others
Data availability
Not applicable.
References
Ahirwar R, Tripathi AK (2021) E-waste management: a review of recycling process, environmental and occupational health hazards, and potential solutions. Environ Nanotechnol Monit Manag 15:100409. https://doi.org/10.1016/j.enmm.2020.100409
Alfieri F, Cordella M, Sanfelix J, Dodd N (2018) An approach to the assessment of durability of energy-related products. Procedia CIRP 69:878–881. https://doi.org/10.1016/j.procir.2017.11.082
Andrade DF, Castro JP, Garcia JA, Machado RC, Pereira-Filho ER, Amarasiriwardena D (2022) Analytical and reclamation technologies for identification and recycling of precious materials from waste computer and mobile phones. Chemosphere 286:131739. https://doi.org/10.1016/j.chemosphere.2021.131739
Awasthi AK, Zlamparet GI, Zeng X, Li J (2017) Evaluating waste printed circuit boards recycling: opportunities and challenges, a mini review. Waste Manag Res J Sustain Circ Econ 35:346–356. https://doi.org/10.1177/0734242X16682607
Babu BR, Parande AK, Basha CA (2007) Electrical and electronic waste: a global environmental problem. Waste Manag Res: J Sustain Circ Econ 25(4):307–318. https://doi.org/10.1177/0734242X07076941
Cesaro A, Marra A, Kuchta K, Belgıorno V, Van Hullebusch ED (2018) WEEE management in a circular economy perspective: An overview. Global Nest J 20(4):743–750. https://doi.org/10.30955/GNJ.002623
Chen W, Shu Y, Li Y et al (2021) Co-pyrolysis of waste printed circuit boards with iron compounds for Br-fixing and material recovery. Environ Sci Pollut Res 28:64642–64651. https://doi.org/10.1007/s11356-021-15506-w
Colasante A, D’Adamo I (2021) The circular economy and bioeconomy in the fashion sector: Emergence of a “sustainability bias.” J Clean Prod 329:129774. https://doi.org/10.1016/j.jclepro.2021.129774
Cooper T (2004) Inadequate life? Evidence of consumer attitudes to product obsolescence. J Consum Policy 27:421–449. https://doi.org/10.1007/s10603-004-2284-6
Cooper T (ed) (2016) Longer Lasting Products. Routledge - Taylor & Francis Group. https://doi.org/10.4324/9781315592930
Cucchiella F, D’Adamo I, Lenny Koh SC, Rosa P (2015) Recycling of WEEEs: an economic assessment of present and future e-waste streams. Renew Sustain Energy Rev 51:263–272. https://doi.org/10.1016/j.rser.2015.06.010
D’Adamo I, Ferella F, Gastaldi M et al (2019) Towards sustainable recycling processes: Wasted printed circuit boards as a source of economic opportunities. Resour Conserv Recycl 149:455–467. https://doi.org/10.1016/j.resconrec.2019.06.012
D’Adamo I, Gastaldi M, Morone P et al (2021a) Bioeconomy of sustainability: drivers, opportunities and policy implications. Sustainability 14:200. https://doi.org/10.3390/su14010200
D’Adamo I, Gastaldi M, Ioppolo G, Morone P (2022) An analysis of Sustainable Development Goals in Italian cities: performance measurements and policy implications. Land Use Policy 120:106278. https://doi.org/10.1016/j.landusepol.2022.106278
D’Adamo I, Gastaldi M, Imbriani C, Morone P (2021b) Assessing regional performance for the Sustainable Development Goals in Italy. Sci Rep 11. https://doi.org/10.1038/s41598-021-03635-8
da Silva Müller Teixeirade Carvalho PeresGomes FACTC et al (2021) A review on the applicability of life cycle assessment to evaluate the technical and environmental properties of waste electrical and electronic equipment. J Polym Environ 29:1333–1349. https://doi.org/10.1007/s10924-020-01966-7
Dervišević I, Minić D, Kamberović Ž, Ćosović V, Ristić M (2013) Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic. Environ Sci Pollut Res 20(6):4278–4292. https://doi.org/10.1007/s11356-012-1448-1
Duan C, Wen X, Shi C et al (2009) Recovery of metals from waste printed circuit boards by a mechanical method using a water medium. J Hazard Mater 166:478–482. https://doi.org/10.1016/j.jhazmat.2008.11.060
Environment Programme UN (2008) UNEP 2007 annual report. In: UNEP 2007 annual report. https://wedocs.unep.org/20.500.11822/7647. Accessed 21 Dec 2022
Ghosh B, Ghosh MK, Parhi P et al (2015) Waste printed circuit boards recycling: an extensive assessment of current status. J Clean Prod 94:5–19. https://doi.org/10.1016/j.jclepro.2015.02.024
Guiltinan J (2009) Creative destruction and destructive creations: environmental ethics and planned obsolescence. J Bus Ethics 89:19–28. https://doi.org/10.1007/s10551-008-9907-9
Hadi P, Xu M, Lin CSK et al (2015) Waste printed circuit board recycling techniques and product utilization. J Hazard Mater 283:234–243. https://doi.org/10.1016/j.jhazmat.2014.09.032
Hennies L, Stamminger R (2016) An empirical survey on the obsolescence of appliances in German households. Resour Conserv Recycl 112:73–82. https://doi.org/10.1016/j.resconrec.2016.04.013
Iji M, Yokoyama S (1997) ‘Recycling of printed wiring boards with mounted electronic components.’ Circuit World 233:10–15
Karagiannopoulos PS, Manousakis NM, Psomopoulos CS (2021) A Novel ILP Formulation for PCB maintenance considering electrical measurements and aging factors: a “right to repair.” Approach Energies 15(1):183. https://doi.org/10.3390/en15010183
Karagiannopoulos PS, Manousakis NM, Psomopoulos CS (2022) A method for assessing the obsolescence of electrical appliances considering PCB maintenance. 9th International Conference on Sustainable Solid Waste Management Corfu, Greece. http://generalchemistry.chemeng.ntua.gr/uest/corfu2022/posters/CostEstimationPayment/626d393b3155eTc1pn/3734_A_method_for_assessing_the_obsolescence_of_electrical_appliances_considering
Kaya M (2019) Electronic Waste and Printed Circuit Board Recycling Technologies. The Minerals, Metals & Materials Series. Springer International Publishing. https://doi.org/10.1007/978-3-030-26593-9
Khayyam Nekouei R, Pahlevani F, Golmohammadzadeh R, Assefi M, Rajarao R, Chen Y-H, Sahajwalla V (2019) Recovery of heavy metals from waste printed circuit boards: statistical optimization of leaching and residue characterization. Environ Sci Pollut Res 26(24):24417–24429. https://doi.org/10.1007/s11356-019-05596-y
Khayyam Nekouei R, Tudela I, Pahlevani F, Sahajwalla V (2020) Current trends in direct transformation of waste printed circuit boards (WPCBs) into value-added materials and products. Curr Opin Green Sustain Chem 24:14–20. https://doi.org/10.1016/j.cogsc.2020.01.003
Kim KS, Hirai Y, Kato M et al (2004) Detailed PCB congener patterns in incinerator flue gas and commercial PCB formulations (Kanechlor). Chemosphere 55:539–553. https://doi.org/10.1016/j.chemosphere.2003.11.056
Kissling R, Fitzpatrick C, Boeni H, Luepschen C, Andrew S, Dickenson J (2012) Definition of generic re-use operating models for electrical and electronic equipment. Resour Conserv Recycl 65:85–99. https://doi.org/10.1016/j.resconrec.2012.04.003
Kleinert E (2013) Troubleshooting and Repairing Major Appliances. 3rd edn. McGraw-Hill, New York
Kogan V (2004) WO2006013568A2 - Recovery of precious metals from electronic scrap by hydrometallurgical processing - Google Patents. In: WO2006013568A2 - Recovery of precious metals from electronic scrap by hydrometallurgical processing - Google Patents. https://patents.google.com/patent/WO2006013568A2/en. Accessed 21 Dec 2022
Li J, Lu H, Guo J et al (2007) Recycle technology for recovering resources and products from waste printed circuit boards. Environ Sci Technol 41:1995–2000. https://doi.org/10.1021/es0618245
Ling N, Malowany ME, Malowany AS (1989) An expert system for circuit board repair. In: Conference Proceeding IEEE Pacific Rim Conference on Communications, Computers and Signal Processing. IEEE, pp 253–256. https://doi.org/10.1109/pacrim.1989.48351
Long E, Kokke S, Lundie D et al (2016) Technical solutions to improve global sustainable management of waste electrical and electronic equipment (WEEE) in the EU and China. J Remanuf 6:1. https://doi.org/10.1186/s13243-015-0023-6
Markewitz P (2002) Stromverbrauch und Einsparpotentiale in Deutschland. Programmgruppe Systemforschung und Technologische Entwicklung. Forschungszentrum, Germany https://www.fz-juelich.de/deAccessed 2022
MATLAB (2022) MATLAB - MathWorks. In: MATLAB - MathWorks - MATLAB & Simulink. https://www.mathworks.com/products/matlab.html. Accessed 21 Dec 2022
Murray W (1997) Sequential quadratic programming methods for large-scale problems. Comput Optim Appl 7(1):127–142. https://doi.org/10.1023/A:1008671829454
Nelen D, Manshoven S, Peeters JR, Vanegas P, D’Haese N, Vrancken K (2014) A multidimensional indicator set to assess the benefits of WEEE material recycling. J Clean Prod 83:305–316. https://doi.org/10.1016/j.jclepro.2014.06.094
Nie C, Zhang H, Qi X et al (2021) Environment-friendly flotation technology of waste printed circuit boards assisted by pyrolysis pretreatment. Process Saf Environ Prot 152:58–65. https://doi.org/10.1016/j.psep.2021.05.040
Ning C, Lin CSK, Hui DCW, McKay G (2017) Waste printed circuit board (PCB) recycling techniques. Top Curr Chem 375(2):43. https://doi.org/10.1007/s41061-017-0118-7
Nnorom IC, Osibanjo O (2008) Overview of electronic waste (e-waste) management practices and legislations, and their poor applications in the developing countries. Resour Conserv Recycl 52:843–858. https://doi.org/10.1016/j.resconrec.2008.01.004
Nnorom IC, Osibanjo O (2009) Toxicity characterization of waste mobile phone plastics. J Hazard Mater 161:183–188. https://doi.org/10.1016/j.jhazmat.2008.03.067
Norgate TE, Jahanshahi S, Rankin WJ (2007) Assessing the environmental impact of metal production processes. J Clean Prod 15:838–848. https://doi.org/10.1016/j.jclepro.2006.06.018
Ogunniyi IO, Vermaak MKG (2009) Froth flotation for beneficiation of printed circuit boards comminution fines: an overview. Miner Process Extr Metall Rev 30(2):101–121. https://doi.org/10.1080/08827500802333123
ONR192102 (2014) ONR192102:2014 10 01 - Austrian Standards -Gütezeichen für langlebige, reparaturfreundlich konstruierte elektrische und elektronische Geräte. In: Austrian Standards. https://shop.austrian-standards.at/action/de/public/details/527823/ONR_192102_2014_10_01
Ozkan E, Elginoz N, GermirliBabuna F (2018) Life cycle assessment of a printed circuit board manufacturing plant in Turkey. Environ Sci Pollut Res 25(27):26801–26808. https://doi.org/10.1007/s11356-017-0280-z
Park YJ, Fray DJ (2009) Recovery of high purity precious metals from printed circuit boards. J Hazard Mater 164:1152–1158. https://doi.org/10.1016/j.jhazmat.2008.09.043
Pozo Arcos B, Bakker C, Flipsen B, Balkenende R (2020). Practices of fault diagnosis in household appliances: Insights for design. J Clean Prod 265. https://doi.org/10.1016/j.jclepro.2020.121812
Rene ER, Sethurajan M, Kumar Ponnusamy V, Kumar G, Bao Dung TN, Brindhadevi K, Pugazhendhi A (2021) Electronic waste generation, recycling and resource recovery: Technological perspectives and trends. J Hazard Mater 416:125664. https://doi.org/10.1016/j.jhazmat.2021.125664
Shuey SA, Taylor PR (2005) Review of Pyrometallurgical Treatment of Electronic Scrap. Mining Engineering 57:67–70. https://www.researchgate.net/publication/279544450_Review_of_Pyrometallurgical_Treatment_of_Electronic_Scrap
Silvas FPC, Jiménez Correa MM, Caldas MPK et al (2015) Printed circuit board recycling: physical processing and copper extraction by selective leaching. Waste Manag 46:503–510. https://doi.org/10.1016/j.wasman.2015.08.030
SilverPrice.Org (2022) SILVERPRICE. In: Silverprice. https://silverprice.org/. Accessed 21 Dec 2022
Stamminger R, Bues A, Alfieri F, Cordella M (2020) Durability of washing machines under real life conditions: definition and application of a testing procedure. J Clean Prod 261:121222. https://doi.org/10.1016/j.jclepro.2020.121222
Truttmann N, Rechberger H (2006) Contribution to resource conservation by reuse of electrical and electronic household appliances. Resour Conserv Recycl 48(3):249–262. https://doi.org/10.1016/j.resconrec.2006.02.003
U.S. Energy Information Administration USEIA (2007) Annual Energy Review 2006. In: Annual Energy Review 2006. https://www.eia.gov/totalenergy/data/annual/archive/038406.pdf. Accessed 21 Dec 2022
US Environmental Protection Agency USEPA (2015) Sustainable management of electronics | US EPA. In: US EPA. https://www.epa.gov/smm-electronics. Accessed 21 Dec 2022
United Nations Environment Programme. https://www.unep.org/ Accessed 30 July 2022
Van Yken J, Cheng KY, Boxall NJ et al (2021) A comparison of methods for the characterisation of waste-printed circuit boards. Metals 11:1935. https://doi.org/10.3390/met11121935
Verguld MMF, Leenaerts MHW (1988) Repair of printed circuit boards carrying surface mount components. Circuit World 14:11–15. https://doi.org/10.1108/eb043947
Wise SA, Barceló D, Garrigues P, Turle R (2006) Advances in analytical techniques for environmental analysis. Anal Bioanal Chem 386:765–767. https://doi.org/10.1007/s00216-006-0768-8
Yang L, He L, Ma Y, Wu L, Zhang Z (2019) A visualized investigation on the intellectual structure and evolution of waste printed circuit board research during 2000–2016. Environ Sci Pollut Res 26(11):11336–11341. https://doi.org/10.1007/s11356-019-04590-8
Yu KH, Zhang Y, Li D, Montenegro-Marin CE, Kumar PM (2021) Environmental planning based on reduce, reuse, recycle and recover using artificial intelligence. Environ Impact Assess Rev 86:106492. https://doi.org/10.1016/j.eiar.2020.106492
Zhang S, Forssberg E (1999) ‘Intelligent liberation and classification of electronic scrap.’ Powder Technol 105:295–301
Zhao Y, Wen X, Li B, Tao D (2004) ‘Recovery of copper from printed circuit boards.’ Miner Metall Process 21:99–102
Zhu J, Huang K (2022) Selective recovery of gold from dilute aqua regia leachate of waste printed circuit board by thiol-modified garlic peel. Environ Sci Pollut Res 29:55990–56003. https://doi.org/10.1007/s11356-022-19584-2
Author information
Authors and Affiliations
Contributions
P.S.K. and N.M.M.: conceptualization, P.S.K. and N.M.M.: methodology, P.S.K. and N.M.M.: validation, P.S.K. and N.M.M.: formal analysis, P.S.K. and N.M.M.: investigation, P.S.K. and N.M.M.: resources, P.S.K. and N.M.M.: data curation, P.S.K. and N.M.M.: writing—original draft preparation, P.S.K., N.M.M. and C.S.P.: writing—review and editing.
Corresponding author
Ethics declarations
Ethics approval
Not applicable.
Consent to participate
Not applicable.
Consent to publish
Not applicable.
Conflict of interest
Not applicable.
Additional information
Responsible Editor: Philippe Garrigues
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Karagiannopoulos, P.S., Manousakis, N.M. & Psomopoulos, C.S. Repair and recycling of PCBs and their components based on obsolescence index: a domestic electrical appliances case study. Environ Sci Pollut Res 31, 17546–17564 (2024). https://doi.org/10.1007/s11356-022-25077-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-022-25077-z