Skip to main content
Log in

The Oxidation and Interdiffusion of a Chromia Forming Multilayered TBC System

  • Original Paper
  • Published:
Oxidation of Metals Aims and scope Submit manuscript

Abstract

Current thermal barrier coating systems (TBCs) rely on an alumina-forming bond coat to provide protection against oxidation. At bond coat temperatures below 900 °C, however, optimum protection against oxidation and hot corrosion is best achieved by a chromia layer. TBC systems using this approach are currently being developed and an example is examined in this paper. The multilayered bond coat in the present TBC system consisted of: a NiCrAlY layer aluminised at its surface; a 50:50 NiCr layer (containing 1.8 wt% Si); an air plasma sprayed yttria stabilised zirconia top coat. These samples were oxidised in laboratory air at 750, 800 and 850 °C for durations up to 1,000 h. Post-test characterisation was undertaken using SEMs and energy dispersive X-ray spectroscopy to determine the growth rate of the TGO and to investigate interdiffusion within the layered coating structure. The interdiffusion process was also modelled using the ODIN finite difference code.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. J. R. Nicholls, N. J. Simms, W. Y. Chan and H. E. Evans, Surface and Coatings Technology 149, 2002 (236).

    Article  Google Scholar 

  2. M. P. Taylor, H. E. Evans, S. Gray and J. R. Nicholls, Materials and Corrosion 62, 2011 (668).

    Article  Google Scholar 

  3. W. M. Pragnell and H. E. Evans, Modelling and Simulation in Materials Science and Engineering 14, 2006 (733).

    Article  Google Scholar 

  4. F. H. Stott, G. J. Gabriel, F. I. Wei and G. C. Wood, Werkstoffe und Korrosion 38, 1987 (521).

    Article  Google Scholar 

  5. R. C. Lobb, J. A. Sasse and H. E. Evans, Materials Science and Technology 5, 1989 (828).

    Article  Google Scholar 

  6. J. Nesbitt and R. Heckel, Metallurgical Transactions A-Physical Metallurgy and Materials Science 18, 1987 (2075).

    Article  Google Scholar 

  7. N. Garimella, Multicomponent interdiffusion in austenitic Ni-, Fe-Ni-base alloys and L12-Ni3Al intermetallic for high-temperature applications, PhD Thesis, University of Central Florida (2009).

Download references

Acknowledgments

This work was funded by the Technology Strategy Board under the CASET project (Carbon Abatement by Surface Engineering Technologies: TP11/CAT/6/I/BP103 K). The authors are grateful to the other project partners (Siemens Turbomachinery and Cranfield University) for helpful discussions and to Mr. J. Wells of RWE-npower for his input into the project and for the provision of the Hastelloy X substrates.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to M. P. Taylor.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Smith, P.J.R., Taylor, M.P., Evans, H.E. et al. The Oxidation and Interdiffusion of a Chromia Forming Multilayered TBC System. Oxid Met 81, 47–55 (2014). https://doi.org/10.1007/s11085-013-9420-0

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11085-013-9420-0

Keywords

Navigation