Abstract
Microstructure and resistivity of ribbons from melt-spun CuCrTi alloys are studied in the initial state and after annealing. Lattice periods of the copper matrix and of chromium inclusions are determined. Thermodynamic analysis of processes occurring in solidification of the alloys is performed.
Similar content being viewed by others
References
W. F. Rieder, M. Schussek, W. Glatze, and E. Kny, IEEE Trans. CHMT, 12(2), 273 (1989).
Y. Wang and B. Ding, IEEE Trans. CPMT, 22(2), 467 (1999).
B. Ding, Z. Yang, and X. Wang, IEEE Trans. CPMT, 19(1), 76 (1996).
S. Spaic, M. Komac, and A. Fetahagic, Mat. Sci. Tech., 5(11), 1069 (1989).
B. J. Ding, PhD Dissertation, Xi’an Jiaotong University (1990).
Z. M. Yang, PhD Dissertation, Xi’an Jiaotong University (1996).
S. X. Xium J. Y. Zou, and J. J. He, High-Voltage Electr. Equip., 36(3), 40 (2000).
F. Zhao, Z. M. Yang, and B. J. Ding, Trans. Nonferrous Met. Soc. China, 10(1), 73 (2000).
H. Cao, A. P. Xian, and J. Chin, Chinese J. Nonferr. Met., No. 12, 570 (2002).
Y. Wang, Z. Sun, and X. Song, Chinese J. Nonferr. Met., No. 7, 1–7 (2005).
K. T. Jacob, S. Priya, and Y.Waseda, Z. Metallkunde, 91(7), 594 (2000).
Pam Wei and Lian Jie, Mater. Sci. Eng., A269, 104 (1999).
J. Y. Lee, J. H. Kim, S. Park, and H. M. Lee, J. All. Comp., 291, 229 (1999).
M. C. Flemings, Solidification Processing, McGraw-Hill Inc. (1974), pp. 303–304.
Author information
Authors and Affiliations
Additional information
__________
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 19–23, April, 2007.
Rights and permissions
About this article
Cite this article
Wang, Y., Song, X., Sun, Z. et al. Effect of titanium additives on the microstructure of melt-spun CuCr ribbons. Met Sci Heat Treat 49, 176–179 (2007). https://doi.org/10.1007/s11041-007-0032-7
Issue Date:
DOI: https://doi.org/10.1007/s11041-007-0032-7