Abstract
Inorganic fillers modified polymer blends are in demands for domestic as well as engineering applications. In the present investigation, polyvinylchloride (PVC)/Nitrocellulose (NC)/Molybdenum disulphide (MoS2) polymer blend were prepared by solution blending. Chemical functionalities present in polymer blends were confirmed the interaction of filler and polymer host system analysed by Fourier transform infrared spectrophotometer. E2g and A1g active mode of Raman scattering were analysed by Raman spectroscopy. Increased degree of crystallinity and crystallite size of polymer blends due to incorporation of MoS2 was investigated by X-ray diffraction. Increased pore morphology of polymer blends was foreseen by Scanning electron microscopy. Intercalated layers of MoS2 in polymer host system was confirmed by energy dispersive X-ray analysis. Dielectric properties of the modified blends were studied by impedance analyser. The hydrophobic to hydrophilic nature of polymer system was determined by measurement of contact angle and relative surface energy analysed by surface goniometer. Increased thermal conductivity due to interaction of filler and polymer host system mutually correlate to the increased degree of crystallinity were explored by Lee’s disc probe. We quantified the influence of MoS2 modified polymer blends could be preferred excellent candidate for engineering domain.
Similar content being viewed by others
References
J.X. Chan et al., Effect of nanofillers on tribological properties of polymer nanocomposites: a review on recent development. Polymers 13(17), 2867 (2021)
M.M. Damien, E. Guillaume, C. Chivas-Joly, Properties of nanofillers in polymer, in Nanocomposites and Polymers with Analytical Methods (2011).
M. Rallini, and J.M. Kenny, Nanofillers in polymers, in Modification of Polymer Properties (2017), pp. 47–86.
D. Marquis, E. Guillaume, C. Chivas-Joly, Properties of nanofillers in polymer, in Nanocomposites and Polymers with Analytical Methods (2011).
T. Gao et al., Fiber-reinforced composites in milling and grinding: machining bottlenecks and advanced strategies. Front Mech Eng 17(2), 1–35 (2022)
P.S. Jadhav, et al., Study of the preparation and properties of polyvinyl chloride/nitrocellulose polymer blends. Polymer Int. 2022
S. Mallakpour, M.A. Sadaty, Thiamine hydrochloride (vitamin B1) as modifier agent for TiO2 nanoparticles and the optical, mechanical, and thermal properties of poly(vinyl chloride) composite films. RSC Adv. 6(95), 92596–92604 (2016)
Q. Gao, L. Yang, N. Liu, Conjugated-polymer/inorganic nanocomposites as electrode materials for Li-Ion batteries, in fundamentals of conjugated polymer blends. Copolym. Compos. 379, 379–418 (2015)
S. Thomas et al., Polymer nanocomposites: preparation, properties and applications. Rubber Fibers Plast Int 2, 49–56 (2007)
M. Akashi, T. Akagi, Composite materials by building block chemistry using weak interaction. Bull. Chem. Soc. Jpn. 94(7), 1903–1921 (2021)
J. Li et al., Recent progress in polymer/two-dimensional nanosheets composites with novel performances. Progr. Polym. Sci. 126, 101505 (2022)
X. Li et al., Isotope-engineering the thermal conductivity of two-dimensional MoS2. ACS Nano 13(2), 2481–2489 (2019)
K. Zhou et al., In situ synthesis, morphology, and fundamental properties of polymer/MoS2 nanocomposites. Compos. Sci. Technol. 107, 120–128 (2015)
K. Zhou et al., Preparation of poly(vinyl alcohol) nanocomposites with molybdenum disulfide (MoS2): structural characteristics and markedly enhanced properties. RSC Adv. 2(31), 11695–11703 (2012)
M.R. Gharib-Zahedi, A. Koochaki, M. Alaghemandi. Significantly enhanced polymer thermal conductivity by confining effect through bilayer MoS2 Surfaces. 2021. arXiv:2108.03875
G. Asan, A. Asan, H. Çelikkan, The effect of 2D-MoS2 doped polypyrrole coatings on brass corrosion. J. Mol. Struct. 1203, 127318 (2020)
K. Wenelska, E. Mijowska, Preparation, thermal conductivity, and thermal stability of flame retardant polyethylene with exfoliated MoS2/MxOy. New J. Chem. 41(22), 13287–13292 (2017)
K. Malkappa, S.S. Ray, N. Kumar, Enhanced thermo-mechanical stiffness, thermal stability, and fire retardant performance of surface-modified 2D MoS2 nanosheet-reinforced polyurethane composites. Macromol. Mater. Eng. 304(1), 1800562 (2019)
K. Zhou et al., The influence of melamine phosphate modified MoS2 on the thermal and flammability of poly(butylene succinate) composites. Polym. Adv. Technol. 27(10), 1397–1400 (2016)
A. Saboor et al., PS/PANI/MoS2 hybrid polymer composites with high dielectric behavior and electrical conductivity for EMI shielding effectiveness. Materials (Basel) 12(17), 2690 (2019)
K. Zhou et al., Constructing hierarchical polymer@MoS2 core-shell structures for regulating thermal and fire safety properties of polystyrene nanocomposites. Compos. A Appl. Sci. Manuf. 107, 144–154 (2018)
N. Xu et al., Preparation of polyvinyl alcohol/two-dimensional transition metal dichalcogenides composites by high-pressure homogenization. J. Appl. Polym. Sci. 137(12), 48487 (2019)
Z. Yang, Z. Guo, C. Yuan, Effects of MoS2 microencapsulation on the tribological properties of a composite material in a water-lubricated condition. Wear 432–433, 102919 (2019)
P.M. Patare, G.S. Lathkar, Optimization of glass fiber and MoS2 filled PTFE composites using non traditional optimization techniques. Mater. Today 5(2), 7310–7319 (2018)
Q. Huang et al., Synthesis of polyacrylamide immobilized molybdenum disulfide (MoS2 @PDA@PAM) composites via mussel-inspired chemistry and surface-initiated atom transfer radical polymerization for removal of copper (II) ions. J. Taiwan Inst. Chem. Eng. 86, 174–184 (2018)
H.-X. Zhang et al., Fabrication of polyethylene/MoS 2 nanocomposites using a novel exfoliated-MoS2–MgCl Bi-supported Ziegler-Natta catalyst via in-situ polymerization. Compos. Sci. Technol. 137, 9–15 (2016)
J. Guo et al., Enhanced performance of multilayer MoS2 transistor employing a polymer capping layer. Org. Electron. 40, 75–78 (2017)
R. Ray, A.S. Sarkar, S.K. Pal, Improving performance and moisture stability of perovskite solar cells through interface engineering with polymer-2D MoS2 nanohybrid. Sol. Energy 193, 95–101 (2019)
A. Saboor et al., PS/PANI/MoS2 hybrid polymer composites with high dielectric behavior and electrical conductivity for EMI shielding effectiveness. Materials 12(17), 2690 (2019)
K. Zhou et al., Facile preparation of poly(methyl methacrylate)/MoS2 nanocomposites via in situ emulsion polymerization. Mater. Lett. 126, 159–161 (2014)
X. Feng et al., Defect-free MoS2 nanosheets: advanced nanofillers for polymer nanocomposites. Compos. A Appl. Sci. Manuf. 81, 61–68 (2016)
T. Li, G. Galli, Electronic properties of MoS2 nanoparticles. J. Phys. Chem. C 111(44), 16192–16196 (2007)
A.V. Kesavan, A.D. Rao, P.C. Ramamurthy, Optical and electronic property tailoring by MoS2-polymer hybrid solar cell. Org. Electron. 48, 138–146 (2017)
E. Abdel-Fattah, A.I. Alharthi, T. Fahmy, Spectroscopic, optical and thermal characterization of polyvinyl chloride-based plasma-functionalized MWCNTs composite thin films. Appl. Phys. A 125(7), 1–8 (2019)
M. Fathy et al., Absorption of calcium ions on oxidized graphene sheets and study its dynamic behavior by kinetic and isothermal models. Appl. Nanosci. 6(8), 1105–1117 (2016)
V.S. Solodovnichenko et al., Synthesis of carbon materials by the short-term mechanochemical activation of polyvinyl chloride. Procedia Eng. 152, 747–752 (2016)
A.F.A. Naim et al., Characterization of PVC/MWCNTs nanocomposite: solvent blend. Sci. Eng. Compos. Mater. 27(1), 55–64 (2020)
S. Trewartha et al., Erratum: determination of deterrent profiles in nitrocellulose propellant grains using confocal Raman microscopy. Propellants Explos. Pyrotech. 36(5), 477–477 (2011)
A. Le Brize, D. Spitzer, Plasticization of submicron-structured LOVA propellants by a linear dinitramine. Central Eur. J. Energ. Mater. 13(3), 547–556 (2016)
K. Zhao et al., High-performance and long-cycle life of triboelectric nanogenerator using PVC/MoS2 composite membranes for wind energy scavenging application. Nano Energy 91, 106649 (2022)
S. Thakur et al., Enhanced physical properties of two dimensional MoS2/poly(vinyl alcohol) nanocomposites. Compos. A Appl. Sci. Manuf. 110, 284–293 (2018)
M.R. Mansor et al., 3—recent advances in polyethylene-based biocomposites, in Natural Fibre Reinforced Vinyl Ester and Vinyl Polymer Composites. (Woodhead Publishing, Sawston, 2018), pp.71–96
M.H. Alotaibi et al., SEM analysis of the tunable honeycomb structure of irradiated poly(vinyl chloride) films doped with polyphosphate. Heliyon 4(12), e01013 (2018)
Z. Zhang et al., High-performance asymmetric isoporous nanocomposite membranes with chemically-tailored amphiphilic nanochannels. J. Mater. Chem. A 8(19), 9554–9566 (2020)
H.-X. Zhang, et al. Fabrication of PA6/MoS2 nanocomposites via melt blending of PA6 with PA6/PEG modified-MoS2 masterbatch. Polym. Bull. 1–14 (2022).
S. Ramesh, C.-W. Liew, Dielectric and FTIR studies on blending of [xPMMA–(1–x)PVC] with LiTFSI. Measurement 46(5), 1650–1656 (2013)
J. Anandraj, G.M. Joshi, Zirconia sulphate dispersed polymer composites for electronic applications. J. Inorg. Organomet. Polym Mater. 27(6), 1835–1850 (2017)
Humbe SS, et al., Quantification of pre and post air plasma defected graphene oxide dispersed polymer blends for high dielectric applications. New J. Chem. (2022).
C.-W. Liew, S. Ramesh, R. Durairaj, Impact of low viscosity ionic liquid on PMMA–PVC–LiTFSI polymer electrolytes based on AC -impedance, dielectric behavior, and HATR–FTIR characteristics. J. Mater. Res. 27(23), 2996–3004 (2012)
S.A. Mansour, R.A. Elsad, M.A. Izzularab, Dielectric properties enhancement of PVC nanodielectrics based on synthesized ZnO nanoparticles. J. Polym. Res. 23(5), 1–8 (2016)
M.S. Mohy Eldin et al., Click grafting of Chitosan onto PVC surfaces for biomedical applications. Adv. Polym. Technol. 37(1), 38–49 (2018)
E. Dhanumalayan et al., Physico-chemical and surface properties of air plasma treated PVDF/PMMA/Attapulgite/hexagonal-Boron Nitride blends. Progr. Org. Coat. 131, 17–26 (2019)
E. Dhanumalayan et al., Disparity in hydrophobic to hydrophilic nature of polymer blend modified by K2Ti6O13 as a function of air plasma treatment. Prog. Org. Coat. 111, 371–380 (2017)
E. Ettah et al., Investigation of the thermal conductivity of polyvinyl chloride (PVC) ceiling material produced In Epz Calabar. For Appl. Trop. Clim. Zones 3, 34–38 (2016)
S.S. Humbe et al., Anomalous properties of plasma treated hexagonal Boron Nitride dispersed polymer nano blends. J. Polym. Res. 29(10), 430 (2022)
D.M. Price, M. Jarratt, Thermal conductivity of PTFE and PTFE composites. Thermochim. Acta 392–393, 231–236 (2002)
P. Homa, K. Wenelska, E. Mijowska, Enhanced thermal properties of poly(lactic acid)/MoS2/carbon nanotubes composites. Sci. Rep. 10(1), 740 (2020)
H. Ribeiro et al., Enhanced thermal conductivity and mechanical properties of hybrid MoS2/h-BN polyurethane nanocomposites. J. Appl. Polym. Sci. 135(30), 46560 (2018)
P. Jadhav, G.M. Joshi, Recent trends in Nitrogen doped polymer composites: a review. J. Polym. Res. 28(3), 1–16 (2021)
X. Pan, M.G. Debije, A.P.H.J. Schenning, High thermal conductivity in anisotropic aligned polymeric materials. ACS Appl. Polym. Mater. 3(2), 578–587 (2021)
M. Gresil et al., Thermal diffusivity mapping of graphene based polymer nanocomposites. Sci. Rep. 7(1), 5536 (2017)
Acknowledgements
The authors would like to gratefully acknowledge the Institute of Chemical Technology Mumbai Marathwada Jalna for providing a doctoral fellowship. Research scholar Pratibha S. Jadhav is grateful to the Vellore Institute of Technology, Vellore (India), for providing the SEM characterisation facility.
Funding
The authors acknowledge funding from the Institute of Chemical Technology Mumbai Marathwada Jalna.
Author information
Authors and Affiliations
Contributions
PSJ: synthesis and manuscript writing, interpretation of data. GMJ: final analysis, supervised the work. SSH, RRD, and SK: helped in characterization.
Corresponding author
Ethics declarations
Conflict of interest
We all authors have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Jadhav, P.S., Humbe, S.S., Joshi, G.M. et al. Polymer Blend Nanoarchitectonics with Exfoliated Molybdenum Disulphide/Polyvinyl Chloride/Nitrocellulose. J Inorg Organomet Polym 33, 680–693 (2023). https://doi.org/10.1007/s10904-022-02518-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10904-022-02518-3