Abstract
Sodium-ion batteries (SIBs) have drawn more attention to serve as one of the promising energy storage devices owing to the abundance of sodium resources and similar characters with lithium element. Hard carbon materials derived from biomass or biomass waste have been considered to act as candidate anode materials for SIBs. In this paper, we have successfully prepared curly hard carbon materials using pistachio shells as biomass template via a two-step approach including hydrothermal treatment and following a pyrolysis process at various temperatures. Physical properties of pistachio shell-derived hard carbons (PSHCs) including microstructure, morphology and pore size distribution are evaluated by X-ray diffraction, Raman spectrum and N2 sorption analysis. The PSHCs carbonized at 1000 °C (PSHC-1000) with average micropores of 0.7398 nm and larger interlayer space of the (002) crystal plane deliver the highest reversible capacity of 317 mAh g−1 at 0.1C, also show the excellent long-term cycling and rate performances. Electrochemical impedance spectroscopy technology is introduced to study the kinetics parameters during the first sodiation process of PSHC-1000 electrode, and also to compare the resistance of the charge transfer process for all the PSHCs. Results exhibit PSHC-1000 electrode with the symmetry factor of 0.1352 has the smallest charge transfer resistance, leading to more easily transportation of electrons and ions. This work can provide a simple and green route for preparation of hard carbon materials derived from biomass waste with unique morphology and microstructure which can exhibit an excellent electrochemical performance.
Similar content being viewed by others
References
Luo W, Shen F, Bommier C, Zhu H, Ji X, Hu L (2016) Na-ion battery anodes: materials and electrochemistry. Acc Chem Res 49:231–240
Dunn B, Kamath H, Tarascon JM (2011) Electrical energy storage for the grid: a battery of choices. Science 334:928–935
Larcher D, Tarascon JM (2015) Towards greener and more sustainable batteries for electrical energy storage. Nat Chem 7:19–29
Kim H, Kim H, Ding Z, Lee MH, Lim K, Yoon G, Kang K (2016) Recent progress in electrode materials for sodium-ion batteries. Adv Energy Mater 6:1600943
Wang W, Li W, Wang S, Miao Z, Liu HK, Chou S (2018) Structural design of anode materials for sodium-ion batteries. J Mater Chem A 6:6183–6205
Thomas P, Ghanbaja J, Billaud D (1999) Electrochemical insertion of sodium in pitch-based carbon fibers in comparison with graphite in NaClO4-ethylene carbonate electrolyte. Electrochim Acta 45:423–430
Hou H, Qiu X, Wei W, Zhang Y, Ji X (2017) Carbon anode materials for advanced sodium-ion batteries. Adv Energy Mater 7:1602898
Jin J, Shi Z, Wang C (2014) Electrochemical performance of electrospun carbon nanofibers as free-standing and binder-free anodes for sodium-ion and lithium-ion batteries. Electrochim Acta 141:302–310
Lu P, Sun Y, Xiang H, Liang X, Yu Y (2017) 3D amorphous carbon with controlled porous and disordered structures as a high-rate anode material for sodium-ion batteries. Adv Energy Mater 7:1702434
Tang K, Fu L, White RJ, Yu L, Titirici M-M, Antonietti M, Maier J (2012) Hollow carbon nanospheres with superior rate capability for sodium-based batteries. Adv Energy Mater 2:873–877
Wang J, Nie P, Ding B, Dong S, Hao X, Dou H, Zhang X (2017) Biomass derived carbon for energy storage devices. J Mater Chem A 5:2411–2428
Tang W, Zhang Y, Zhong Y, Shen T, Wang X, Xia X, Tu J (2017) Natural biomass-derived carbons for electrochemical energy storage. Mater Res Bull 88:234–241
Gao Y, Zhai Z, Huang K, Zhang Y (2017) Energy storage applications of biomass-derived carbon materials: batteries and supercapacitors. New J Chem 41:11456–11470
Long W, Fang B, Ignaszak A, Wu Z, Wang Y, Wilkinson D (2017) Biomass-derived nanostructured carbons and their composites as anode materials for lithium ion batteries. Chem Soc Rev 46:7176–7190
Jiang L, Sheng L, Fan Z (2018) Biomass-derived carbon materials with structural diversities and their applications in energy storage. Sci China Mater 61:133–158
Kalyani P, Anitha A (2013) Biomass carbon & its prospects in electrochemical energy systems. Int J Hydrog Energy 38:4034–4045
Yan L, Yu J, Houston J, Flores N, Luo H (2017) Biomass derived porous nitrogen doped carbon for electrochemical devices. Green Energy Environ 2:84–99
Dahbi M, Kiso M, Kubota K, Horiba T, Chafik T, Hida K, Matsuyama T, Komab S (2017) Synthesis of hard carbon from argan shells for Na-ion batteries. J Mater Chem A 5:9917–9928
Zheng Y, Wang Y, Lu Y, Hu Y, Li J (2017) A high-performance sodium-ion battery enhanced by macadamia shell derived hard carbon anode. Nano Energy 39:489–498
Dou X, Hasa I, Hekmatfar M, Diemant T, Behm RJ, Buchholz D, Passerini S (2017) Pectin, hemicellulose, or lignin? Impact of the biowaste source on the performance of hard carbons for sodium-ion batteries. ChemSusChem 10:2668–2676
Lv W, Wen F, Xiang J, Zhao J, Li L, Wang L, Liu Z, Tian Y (2015) Peanut shell derived hard carbon as ultralong cycling anodes for lithium and sodium batteries. Electrochim Acta 176:533–541
Kim K, Lim DG, Han CW, Osswald S, Ortalan V, Youngblood JP, Pol VG (2017) Tailored carbon anodes derived from biomass for sodium-ion storage. ACS Sustain Chem Eng 5:8720–8728
Lotfabad EM, Ding J, Cui K, Kohandehghan A, Kalisvaart WP, Hazelton M, Mitlin D (2014) High-density sodium and lithium ion battery anodes from banana peels. ACS Nano 8:7115–7129
Xiang J, Lv W, Mu C, Zhao J, Wang B (2017) Activated hard carbon from orange peel for lithium/sodium ion battery anode with long cycle life. J Alloy Compd 701:870–874
Kim NR, Yun YS, Song MY, Hong SJ, Kang M, Leal C, Park YW, Jin H (2016) Citrus-peel-derived, nanoporous carbon nanosheets containing redox-active heteroatoms for sodium-ion storage. ACS Appl Mater Interfaces 8:3175–3181
Zhu Z, Liang F, Zhou Z, Zeng X, Wang D, Dong P, Zhao J, Sun S, Zhang Y, Li X (2018) Expanded biomass-derived hard carbon with ultrastable performance in sodium-ion batteries. J Mater Chem A 6:1513–1522
Wang C, Huang J, Qi H, Cao L, Xu Z, Cheng Y, Zhao X, Li J (2017) Controlling pseudographtic domain dimension of dandelion derived biomass carbon for excellent sodium-ion storage. J Power Sources 358:85–92
Zhang T, Mao J, Liu X, Xuan M, Bi K, Zhang XL, Hu J, Fan J, Chen S, Shao G (2017) Pinecone biomass-derived hard carbon anodes for high-performance sodium-ion batteries. RSC Adv 7:41504–41511
Yan D, Yu C, Zhang X, Qin W, Lu T, Hu B, Li H, Pan L (2016) Nitrogen-doped carbon microspheres derived from oatmeal as high capacity and superior long life anode material for sodium ion battery. Electrochim Acta 191:385–391
Qin D, Chen S (2017) A sustainable synthesis of biomass carbon sheets as excellent performance sodium ion batteries anode. J Solid State Electrochem 21:1305–1312
Liu P, Li Y, Hu Y, Li H, Chen L, Huang X (2016) A waste biomass derived hard carbon as a high-performance anode material for sodium-ion batteries. J Mater Chem A 4:13046–13052
Yang T, Qian T, Wang M, Shen X, Xu N, Sun Z, Yan C (2016) A sustainable route from biomass byproduct okara to high content nitrogen-doped carbon sheets for efficient sodium ion batteries. Adv Mater 28:539–545
Li Y, Hu Y, Titirici M, Chen L, Huang X (2016) Hard carbon microtubes made from renewable cotton as high-performance anode material for sodium-ion batteries. Adv Energy Mater 6:1600659
Elizabeth I, Singh BP, Trikha S, Gopukumar S (2016) Bio-derived hierarchically macro-meso-micro porous carbon anode for lithium/sodium ion batteries. J Power Sources 329:412–421
Ou J, Yang L, Zhang Z, Xi X (2017) Nitrogen-doped porous carbon derived from horn as an advanced anode material for sodium ion batteries. Microporous Mesoporous Mater 237:23–30
Shen F, Luo W, Dai J, Yao Y, Zhu M, Hitz E, Tang Y, Chen Y, Sprenkle VL, Li X, Hu L (2016) Ultra-thick, low-tortuosity, and mesoporous wood carbon anode for high-performance sodium-ion batteries. Adv Energy Mater 6:1600377
Guo L, An Y, Fei H, Feng J, Xiong S, Ci L (2017) Self-templated biomass-derived nitrogen-doped porous carbons as high performance anodes for sodium ion batteries. Mater Technol 32:592–597
Sharma N, Gawli Y, Ahmad A, Muhammed M, Ogale S (2017) Nanotubular hard carbon derived from renewable natural seed gel for high performance sodium-ion battery anode. ChemistrySelect 2:6909–6915
Acikalin K, Karaca F, Bolat E (2012) Pyrolysis of pistachio shell: effects of pyrolysis conditions and analysis of products. Fuel 95:169–177
Hu C-C, Wang C-C, Wu F-C, Tseng R-L (2007) Characterization of pistachio shell-derived carbons activated by a combination of KOH and CO2 for electric double-layer capacitors. Electrochim Acta 52:2498–2505
Kamandari H, Rafsanjani HH, Najjarzadeh H, Eksiri Z (2015) Influence of process variables on chemically activated carbon from pistachio shell with ZnCl2 and KOH. Res Chem Intermed 41:71–81
Lua AC, Yang T (2005) Characteristics of activated carbon prepared from pistachio-nut shell by zinc chloride activation under nitrogen and vacuum conditions. J Colloid Interface Sci 290:505–513
Dolas H, Sahin O, Saka C, Demir H (2011) A new method on producing high surface area activated carbon: the effect of salt on the surface area and the pore size distribution of activated carbon prepared from pistachio shell. Chem Eng J 166:191–197
Xu J, Gao Q, Zhang Y, Tan Y, Tian W, Zhu L, Jiang L (2014) Preparing two-dimensional microporous carbon from pistachio nutshell with high areal capacitance as supercapacitor materials. Sci Rep 4:5545
Hassan AF, Youssef AM, Priecel P (2013) Removal of deltamethrin insecticide over highly porous activated carbon prepared from pistachio nutshells. Carbon Lett 14:234–242
Noman M, Sanginario A, Jagadale P, Tagliaferro A, Demarchi D (2015) Activated carbonized pistachio nut shells for electrochemiluminescence detection. J Appl Electrochem 45:585–590
Hong K, Qie L, Zeng R, Yi Z, Zhang W, Wang D, Yin W, Wu C, Fan Q, Zhang W, Huang Y (2014) Biomass derived hard carbon used as a high performance anode material for sodium ion batteries. J Mater Chem A 2:12733–12738
Acikalin K (2012) Pyrolytic characteristics and kinetics of pistachio shell by thermogravimetric analysis. J Therm Anal Calorim 109:227–235
Cançado LG, Takai K, Enok T, Endo M, Kim YA, Mizusaki H, Jorio A, Coelho LN, Magalhães-Paniago R, Pimenta MA (2006) General equation for the determination of the crystallite size La of nanographite by Raman spectroscopy. Appl Phys Lett 88:163106
Jiang J, Zhu J, Ai W, Fan Z, Shen X, Zou C, Liu J, Zhang H, Yu T (2014) Evolution of disposable bamboo chopsticks into uniform carbon fibers: a smart strategy to fabricate sustainable anodes for Li-ion batteries. Energy Environ Sci 7:2670–2679
Hasegawa G, Kanamori K, Kannari N, Ozaki J, Nakanishi K, Abe T (2016) Studies on electrochemical sodium storage into hard carbons with binder-free monolithic electrodes. J Power Sources 318:41–48
Zhu Y, Chen M, Li Q, Yuan C, Wang C (2017) High-yield humic acid-based hard carbons as promising anode materials for sodium-ion batteries. Carbon 123:727–734
Sun N, Li H, Xu B (2015) Facile synthesis of high performance hard carbon anode materials for sodium ion batteries. J Mater Chem A 3:20560–20566
Ding J, Wang H, Li Z, Kohandehghan A, Cui K, Xu Z, Zahiri B, Tan X, Lotfabad EM, Olsen BC, Mitlin D (2013) Carbon nanosheet frameworks derived from peat moss as high performance sodium ion battery anodes. ACS Nano 7:11004–11015
Xu S-D, Zhuang Q-C, Tian L-L, Qin Y-P, Fang L, Sun S-G (2011) Impedance spectra of nonhomogeneous, multilayered porous composite graphite electrodes for Li-ion batteries: experimental and theoretical studies. J Phys Chem C 115:9210–9219
Bard AJ, Faulkner LR (2001) Electrochemical methods: fundamentals and applications, 2nd edn. Wiley, New York
Zhou X, Guo Y-G (2014) Highly disordered carbon as a superior anode material for room-temperature sodium-ion batteries. ChemElectroChem 1:83–86
Xu S-D, Zhuang Q-C, Wang J, Xu Y, Zhu Y (2013) New insight on vinylethylene carbonate as a film forming additive to ethylene carbonate-based electrolytes for lithium-ion batteries. Int J Electrochem Sci 8:8058–8076
Zhang Y, Chen L, Meng Y, Xie J, Guo Y, Xiao D (2016) Lithium and sodium storage in highly ordered mesoporous nitrogen-doped carbons derived from honey. J Power Sources 335:20–30
Yuan DD, Wang YX, Cao YL, Ai XP, Yang HX (2015) Improved electrochemical performance of Fe-substituted NaNi0.5Mn0.5O2 cathode materials for sodium-ion batteries. ACS Appl Mater Interfaces 7:8585–8591
Wang P-F, You Y, Yin Y-X, Guo Y-G (2016) An O3-type NaNi0.5Mn0.5O2 cathode for sodium-ion batteries with improved rate performance and cycling stability. J Mater Chem A 4:17660–17664
Acknowledgements
This work was supported by the National Natural Science Foundation of China (Grant Nos. 21606158, 21506141 and 21706171) and Natural Science Foundation of Shanxi Province (Grant Nos. 2015021131 and 2016021040).
Author information
Authors and Affiliations
Corresponding authors
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Xu, SD., Zhao, Y., Liu, S. et al. Curly hard carbon derived from pistachio shells as high-performance anode materials for sodium-ion batteries. J Mater Sci 53, 12334–12351 (2018). https://doi.org/10.1007/s10853-018-2472-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-018-2472-4