Skip to main content
Log in

Preparation of composite particles coated with two kinds of solid powders by semi-chemical recycle method

  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Polymer microspheres coated with two kinds of solid powders were prepared by the semi-chemical recycle method of waste plastics. Magnetite (Fe3O4) and silicon carbide (SiC) were added as solid powders so as to give thermal and electric conductivity and magnetization. Waste expanded polystyrene was used as raw materials of polymer matrix of composite particles. In the experiment, the oil phase dissolving expanded polystyrene was dispersed to form the O/W dispersion in the continuous water phase in which polyvinyl alcohol and magnetite powders were added. And then, silicon carbide powder was added into the O/W dispersion. Composite particles prepared had the structure that a polymer particle was covered with two kinds of solid powders. The amount of each solid powder adhered on the surface of polymer microsphere was strongly affected by an addition time of silicon carbide powder. Furthermore, the gradient adhesion layer due to two solid powders was found to be formed on the surface of polymer microsphere.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. B. ERDEM, E. D. SUDOL, V. L. DIMONIE and M. S. EL-AASSER, Macromol. Symp. 155 (2000) 181.

    Article  CAS  Google Scholar 

  2. M. NISHIMURA, T. FURUTANI and N. TAKAO, J. Jpn. Soc. Color. Mater. 75 (2002) 579.

    Article  CAS  Google Scholar 

  3. M. OMODANI, J. Imag. Soc. Jpn. 38 (1999) 115.

    CAS  Google Scholar 

  4. E. OSHIMA and M. TANAKA, Kagaku Kogaku Ronbunshu 8 (1982) 188.

    Article  CAS  Google Scholar 

  5. H. HORI, Y. TAGUCHI and M. TANAKA, Kagaku Kogaku Ronbunshu 24 (1998) 603.

    Article  CAS  Google Scholar 

  6. Y. TAGUCHI, N. SAITO and M. TANAKA, J. Jpn. Soc. Color. Mater. 70 (1997) 503.

    Article  CAS  Google Scholar 

  7. Y. TAGUCHI, N. SAITO, I. KIMURA and M. TANAKA, Colloids and Surfaces A 153 (1999a) 401.

    Article  CAS  Google Scholar 

  8. Y. TAGUCHI, K. HOSOGAI and M. TANAKA, Kagaku Kogaku Ronbunshu 25 (1999b) 758.

    Article  CAS  Google Scholar 

  9. M. TANAKA, K. INABA and I. KIMURA, J. Jpn. Soc. Color. Mater. 64 (1991) 64.

    Article  CAS  Google Scholar 

  10. M. TANAKA, A. SAITO, K. HOSOGAI and I. KIMURA, Kagaku Kogaku Ronbunshu 18 (1992a) 330.

    Article  CAS  Google Scholar 

  11. M. TANAKA, K. HOSOGAI, T. YUDA, I. KIMURA and N. SAITO, J. Jpn. Soc. Color. Mater. 65 (1992b) 484.

    Article  CAS  Google Scholar 

  12. M. TANAKA, H. SATO, I. KIMURA and N. SAITO, J. Jpn. Soc. Color. Mater. 67 (1994) 300.

    Article  CAS  Google Scholar 

  13. M. TANAKA, Y. TAGUCHI and Y. IGUCHI, Kagaku Kogaku Ronbunshu 24 (1998) 509.

    Article  CAS  Google Scholar 

  14. Y. TAGUCHI and M. TNAKA, J.Chem.eng. Japan 34(9) (2001) 1177.

    Article  CAS  Google Scholar 

  15. Y. KOUSAKA, Y. ENDO, T. HORIUCHI and Y. SAKAI, Kagaku Kogaku Ronbunshu 21 (1995) 372.

    Article  CAS  Google Scholar 

  16. R. H. OTTEWILL, A. B. SCHOFIELD, J. A. WATERS and N. ST. J. WILLIAMS, Colloid Polym. Sci. 275 (1997) 274.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to M. Tanaka.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Tanaka, M., Taguchi, Y., Sawatari, N. et al. Preparation of composite particles coated with two kinds of solid powders by semi-chemical recycle method. J Mater Sci 41, 4215–4220 (2006). https://doi.org/10.1007/s10853-006-6273-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-006-6273-9

Keywords

Navigation